PDA

View Full Version : gauge mounting positions


prelude180
11-21-2004, 02:12 PM
Can we start a thread to show pictures of guages/ and other monitoring devices like boost controllers and such? People can show what they have/use and where it is mounted.

ThatGuy
11-21-2004, 02:23 PM
I believe there are already a few threads like this. Have you searched?

mjjstang
11-21-2004, 02:29 PM
well I got a few ideas, obviously there is the dual pod, which I have, I also have the ebay pod that goes in the heater vent, with the middle air duct, its nice becuase u can still get some air and heat out of there, of course i will need a nother spot eventually and will want another hole there, they have the 3 gauge one but they are 2 5/8, I dont care for the ones that go between steering wheel and gauge cluster but whatever, rihgt now I did some velcro to the area behind the shifter, for the safc, but I have came up with a plan, I dont have the bucket that goes under the radio, but I have fabbed a steel bracket to be bent in a l__l shape, and I will mountit, then the safc mounts on that, and there is still like a 2 by 2 square not enough for a gauge so Ill just block it off with some black insert or something, If I am not so lazy this week Ill post some pics.

nismo2491
11-21-2004, 02:36 PM
you can put gauges all kinds of places. put a cf panel over the radio hole and mount there. panel over the vent hole in the middle and mount there, single pod attached to the steering wheel column a la wrx style, etc.
KEvin

prelude180
11-21-2004, 05:50 PM
are they any sort of gauge holders or anything that mounts above the air vents and is made for an s13?

prelude180
11-26-2004, 03:16 PM
is it bad to cover up your middle vents?

nismo2491
11-26-2004, 04:08 PM
not really, just make sure you use something to seal the actual duct up good, lotta duct tape works, because otherwise you will be blowing air that can cause moisture right onto the back of the gauges. it might not hurt them but why risk it.
KEvin

Maeda
11-28-2004, 02:06 PM
is it bad to cover up your middle vents?

You have a/c? :ghey:


Look at my thing in the member's ride section
Here I did the leg work. (http://www.zilvia.net/f/vbgarage.php?do=view&id=3922)
It has the center vent's covered with a piece of metal I stole from my roommate. It holds 3 52mm gauges although the spot could easily hold 60mm's. The NICEST place to mount gauges is passenger side of the dash, all in a row.

DoriftoSlut
11-28-2004, 02:28 PM
The NICEST place to mount gauges is passenger side of the dash, all in a row.
What?

http://img.photobucket.com/albums/v238/Pink_GodziRa/PG_017.jpg

You know... just waiting for the EGT. And since that pic i FINALLY got a boost guage in the car... right on the top of the steering column... HKS 48mm

Maeda
11-28-2004, 02:30 PM
Good. I was just checking if you still use zilvia. :p