jaydawg
07-25-2019, 09:30 AM
Hi All,
I am new here and new to S Chassis. Picked up a 95 240sx project car and have already tore down the engine etc.. It was already out of the car... enough blah blah stuff. I am wondering if anyone he has a good reference for a machine shop in Phoenix. I have a KA24de, everything looks good except for a bent connecting rod. Cylinders measured 89mm so close or with in spec. I plan to go KAT and will use forged internals. I talked to 1 shop already but if you guys have a good one, please let me know.
Thanks
1st post btw.
Jay
I am new here and new to S Chassis. Picked up a 95 240sx project car and have already tore down the engine etc.. It was already out of the car... enough blah blah stuff. I am wondering if anyone he has a good reference for a machine shop in Phoenix. I have a KA24de, everything looks good except for a bent connecting rod. Cylinders measured 89mm so close or with in spec. I plan to go KAT and will use forged internals. I talked to 1 shop already but if you guys have a good one, please let me know.
Thanks
1st post btw.
Jay