Ka24 AMS fuel setup, Nistune ecu, Mishimoto radiator

[GRimm240sx]

AMS top feed fuel rail setup with 95lb(1000cc) injectors and SS braided lines fpr and high flow inline fuel filter. - $700

Feed and return lines are a little longer then needed as the hard lines on my body were jacked so I had to increase the length to compensate.

Nistune type 3 board, ecu is from a 91 s13 - $250

Mishimoto aluminum radiator - $180
- Bought new, installed but never used or filled with anything.

https://i.imgur.com/GGHnarIl.jpg
https://i.imgur.com/tXSEsaBl.jpg

[Z32tt40r]

Would you sell the rail by itself??

[GRimm240sx]

Yes sir I would

[JordanWieser]

What fpr is on this?

Sent from my SM-G965U using Tapatalk

[GRimm240sx]

It's an off brand I picked up off Summit Racing, can't remember if it was their brand or just a generic one but it's been so long I don't remember

Here's a better pic of it, can take a closer one next time I'm at my storage locker.

https://i.imgur.com/dXMvoErl.jpg