GEN2 - Garrett GTX3076R Turbo kit

[Fitelite240]

GEN2 - Garrett GTX3076R Turbo w/ Divided 1.06 A/R T4 Turbine Housing w/3" VBAND Exit
Product Specifications:
Compressor Wheel Inducer: 58mm
Compressor Wheel Exducer: 76mm
Compressor Wheel Trim: 58
Compressor Housing A/R: 0.60
Turbine Wheel Inducer: 60mm
Turbine Wheel Exducer: 55mm
Turbine Wheel Trim: 84
T4 Divided Inlet, 3.0" V-Band Outlet, 1.06 A/R
Comes with new fittings and clamps from atp
(2) Banjo Kit, 14 mm Longnose Steel for coolant ATP-FTG-215
-4 size Oil inlet fitting for GT28 GTX28 GT30 GTX30 GT35R with built-in .035" RESTRICTOR ATP-OIL-021
Oil Return ( drain ) Flange with integrated -10 Flare for GT15 Through GT35R ATP-FLA-019
DOWNPIPE FLANGE, Stainless 3" GT V-Band w/ 81mm protruded lip, Garrett Housings with 90mm (3.55”) OD ATP-FLS-246
CLAMP, V-Band DOWNPIPE SIDE - 3" Garrett "GT V-Band" Turbine Housings that have 90mm OD Flange & G25 CLC-CLA-048
Gasket, T4 (T04) Turbine Inlet - DIVIDED
ATP-GSK-014

Asking $1500 shipped

https://i.imgur.com/2KuFZPI.png

[rps13neverstop]

Is this for the turbo and manifold and wastegate???

[RalliartRsX]

The thread title is misleading at there is no manifold, piping, etc included in this............"kit"

That manifold is a K series manifold it seems.
Can you please fix the thread title?? You are only selling a turbo and a few accompanying parts.

[Fitelite240]

The k series sheepey manifold is included for $500.

Thanks.

[RalliartRsX]

This entire post is confusing........

- If something is included, you cannot also, in the same breath, put a price on it
- If the manifold is a part of the "kit" the first post should reflect this
- This is a NISSAN forum. That is a FWD manifold. For the few folks that run a RWD K, that manifold will not fit. There is an even smaller market of folks on here who run a FWD K series....
- A manifold and a turbo is not a turbo kit........its a manifold and a turbo with a few ancillaries....

GLWS. Awesome turbo right here

[Fitelite240]

Thanks for the correction.

[DeadWRK]

Still have the manifold?

[Fitelite240]

Yes still have it.