Z32 Parking Brake setup on S13 Rear Subframe ?

[Daz-E]

I have z32TT hubs, calipers, and rotors on my s13 rear subframe. I want to add the parking/E-brake feature to it. Do I use to Z32TT/Q45 or can I use s13/S14 ?

My car is a 74' Datsun 260z with a S13 rear subframe mounted to it !

[LoSt180]

The Z32 ebrake setup will bolt up to the S13 knuckle. Do a search to verify what parts you need, but a quick sumarry is Z32 dust shields, ebrake shoes, and cables. You can't use S13 ebrake setup because those were integrated into the rear calipers.

[Daz-E]

The Z32 ebrake setup will bolt up to the S13 knuckle. Do a search to verify what parts you need, but a quick sumarry is Z32 dust shields, ebrake shoes, and cables. You can't use S13 ebrake setup because those were integrated into the rear calipers.

Thanks Brutha ! I already started buying z32/q45 parking brake parts. I found the dust shield on ebay for $45 shipped. Then I bought pads and a hardware kit. I still need to grab some parts off of some junkyard cars that don't come with the hardware kit.

After all is assembled I'll have to figure out how to make it all work with the s30(260z) Ebrake mechanism.

[brndck]

also worth considering, what axles are you using if you have z32 TT hubs?

[Daz-E]

I have 1 side done(I just need to figure out the cable operation and how to integrate it to my s30)
, I have to save up some cash to buy new hub bearing for the other side. I am using 1 q45(90-94) passenger side axle and 1 z32tt driverside axle.