Snorlax's Build

[s1421]

Decided to finally make a build thread for Snorlax.
I bought the car as my first car right after high school 2010
with 98,xxx miles. Car was all stock

Here is a pic from Nissan Jam 2016
https://farm8.staticflickr.com/7822/46284815995_f5631b74c3_c.jpg
https://farm8.staticflickr.com/7890/31984020747_d181acc893_c.jpg

Lost most of my early stages pictures of the car on my old phone

https://farm8.staticflickr.com/7815/46284817585_6349d16b9a_c.jpg

https://farm8.staticflickr.com/7857/46475650444_c4a4d5a3cd_c.jpg

Day when the SR first when in

https://farm8.staticflickr.com/7891/33323701068_1bc9da1997_c.jpg[/url]


https://farm8.staticflickr.com/7888/40234511773_0793d68eda_c.jpg

https://farm8.staticflickr.com/7838/33323699658_f0bd162f72_c.jpg

Car had gone through a lot of improvements through the years

https://farm8.staticflickr.com/7822/46285008425_4e2e82cb71_c.jpg

https://farm8.staticflickr.com/7914/47147319482_9678ff7927_c.jpg

https://farm8.staticflickr.com/7871/46475647834_0fa91623cd_c.jpg


https://farm8.staticflickr.com/7825/40234698133_3fd9db88ae_c.jpg


Last day Snorlax ran a track event before SR was pulled out
Bought a diffuser from a friend and decided to put it on after many years of debating wether to do it or not.

https://farm8.staticflickr.com/7817/47147527412_14421f8814_c.jpg


https://farm8.staticflickr.com/7855/40234698093_9b9a9254bf_c.jpg

https://farm8.staticflickr.com/7838/46285004125_f7de419ee6_c.jpg


https://farm8.staticflickr.com/7873/32257062627_d84e590289_c.jpg



so the build starts here when the SR came out of the car and was on the way to my friends S14.


https://farm8.staticflickr.com/7831/40234694493_4fc94e9fa8_c.jpg

https://farm8.staticflickr.com/7818/32257234617_88bcfc01be_c.jpg

https://farm8.staticflickr.com/7846/40234695543_1069176049_c.jpg

https://farm8.staticflickr.com/7895/46475851794_8f9f84634f_c.jpg

https://farm8.staticflickr.com/7824/47199360721_c29abef454_c.jpg

Got an opportunity to buy my friends 98’ SE Hardtop (SR Powered,full 326 power suspension, clean interior) for a good deal so I couldn’t let it pass.

https://farm8.staticflickr.com/7875/47147319752_b24ae0cbd2_c.jpg

https://farm8.staticflickr.com/7920/40234692063_c9a26f79e1_c.jpg

https://farm8.staticflickr.com/7902/40234676773_5702428646_c.jpg


So the engine going in Snorlax is going to be the LS3 ERod version. Going this route because have been ref twice going to school and didnt want to risk a third time. All times have been in the city of Irvine. Daily drove the car for school during the time I was going there and everything was a fine for like 2 years but luck changed.

So first piece I bought was a brand new T56 Magnum

https://farm8.staticflickr.com/7816/46284994805_9bebc70854_c.jpg


https://farm8.staticflickr.com/7859/47199359801_1840b42ff6_c.jpg



Stripped the engine bay before taking it to the shop to paint the bay..

https://farm8.staticflickr.com/7807/46284992815_310ed6bd84_c.jpg


https://farm8.staticflickr.com/7902/47199358221_f88334ab4b_c.jpg


https://farm8.staticflickr.com/7852/47199357841_4b6d82b52f_c.jpg


Sitting at the shop


https://farm8.staticflickr.com/7853/32257230607_37565c0360_c.jpg


https://farm8.staticflickr.com/7861/46475847074_097c9d559b_c.jpg


Started to prep the bay.
I wanted to shave as much possible

https://farm8.staticflickr.com/7913/46284989735_65cc1a61f5_c.jpg


https://farm8.staticflickr.com/7897/46284989255_10b3ef3f93_c.jpg


https://farm8.staticflickr.com/7882/46284988055_90715b0377_c.jpg

closed up the holes where there IC piping ran through
https://farm8.staticflickr.com/7853/46475841704_81a45b7489_c.jpg

https://farm8.staticflickr.com/7812/33323883088_d5c7381a20_c.jpg

primed the engine bay and did a removable core support and my buddy fab up a dimple plated core support upper beam
keeping stock one also just in case

https://farm8.staticflickr.com/7836/40234683643_4b2aeee3e3_c.jpg

https://farm8.staticflickr.com/7803/46475840104_342633a0fc_c.jpg

after sanding down the primer it was time for paint

black sealer down
https://farm8.staticflickr.com/7860/32257222697_fc591e9c54_c.jpg

then base/clear
went with a grey metallic from GM
https://farm8.staticflickr.com/7832/40234680383_dcb729dcf4_c.jpg

https://farm8.staticflickr.com/7834/33323880398_e9f16e74ed_c.jpg

https://farm8.staticflickr.com/7814/47147505742_73962c666f_c.jpg

brought Snorlax back home

https://farm8.staticflickr.com/7878/32257216867_9b47036cc7_c.jpg

https://farm8.staticflickr.com/7925/32257214057_bd157a53ff_c.jpg

I also undercoated all the chassis from underneath and removed both subframes to paint
can't find pictures of that I guess I forgot to take some of those
painted everything silver though

https://farm8.staticflickr.com/7831/33323878318_cc7b708825_c.jpg

[s1421]

tested fitted the t56
https://farm8.staticflickr.com/7893/32257210807_7f21ac0acf_c.jpg


bought a set of ctsv calipers on amazon day for a good deal so I pulled the trigger

https://farm8.staticflickr.com/7850/32257213587_216224d25c_c.jpg


https://farm8.staticflickr.com/7825/47199336471_9ee4da02fb_c.jpg


https://farm8.staticflickr.com/7810/32257210877_4677eb1b53_c.jpg

https://farm8.staticflickr.com/7848/47147498782_f7e4fc36ea_c.jpg

https://farm8.staticflickr.com/7878/33323871788_d53fdae3e8_c.jpg


https://farm8.staticflickr.com/7917/32257202307_210734eb31_c.jpg

my buddy gave me a full hydro ebrake kit so thats the only reason why im running duals
if not I probably wouldn't have


wanted to do something to the dash support bar so I decided to paint it with just clear with a lil bit of silver flake mixed into it

https://farm8.staticflickr.com/7881/32257204037_79b883bf7f_c.jpg

https://farm8.staticflickr.com/7847/46475829224_d1b1a79d11_c.jpg



test fitted some saga's 18x9.5 +22
https://farm8.staticflickr.com/7828/32257201917_590d9f2b8d_c.jpg

https://farm8.staticflickr.com/7833/47147495602_dd8ff4d9c3_c.jpg

https://farm8.staticflickr.com/7908/47147495482_9cd70a2df5_c.jpg

bought some z track wheels this weekend 2/23/2019 to be able to roll the car found them on offerup for $400 with tires in ok condition, might just refinish them and use them for track also

https://farm8.staticflickr.com/7895/32257200647_73899fdd67_c.jpg

all caught up to date on the build
will update as much as possible with more better/detailed pictures

[turbo2nr]

nice build so far!

what trunk is that with the built in spoiler looks very good.

[s1421]

Thanks dude!
It is the Dmax trunk

[s13poop]

Definitely one of the cleanest Zenki’s in SoCal

Can’t wait to see it running again!

[s1421]

Thanks bro
Same goes for your coupe one of the best ones here!

[dizzariot]

Weren't both of these S14s at Nissan Jam '16? I was there an I thought they were both my idea of 'just right'. Are you keeping them both?

[s1421]

Yeah man 16' haha
You had that hatch there with the s15 seats and TE's right?
Well the black one is my friends which now has the SR that was on my zenki.

[2fastandfurious]

Sick!! Really like where this build is going [emoji1689] [emoji1786]


Sent from my iPhone using Tapatalk

[gzus9]

Great progress cant wait to see it finished even though it will be LS :rofl:

[s14fiend]

https://binged.it/2GMRYIK

[afishysilvia]

Very awesome build man, in for another LS 240. Just remember it’s your car and fuck what anyone else on here or around you thinks. After reading your note about being ref’d that’s really odd. Orange County however has a reputation to uphold. What HP numbers you aiming for with the Erod motor?

[EFITTZY]

In for updates man, this thing is gunna be sweet!:snoop:

[s1421]

Yeah man its cool haha I still have the kouki to keep it jdm haha
Well im planning on leaving it all stock for a while. Nothing can be modified in order to pass inspection but im sure im going to want some more power after a while!

[s1421]

Thanks everyone hopefully it can get done this year!

[Turbozx]

Subscribed. Same engine and tranny combo as your build so excited to follow your build.

[s1421]

Just in case whoever doesn't know who Snorlax is haha

https://farm8.staticflickr.com/7806/46329426445_2e8cb7987e_c.jpg

Got my bell housing in the other day and bolted it up to the case.

https://farm8.staticflickr.com/7807/33348429608_fe64e06cf3_c.jpg

https://farm8.staticflickr.com/7845/33348429578_443a0bfaa4_c.jpg

Started to pull out some of my stored objects!
Got a clean black dash along with a Nismo wheel and brand new front end lighting that I've been storing for a while...

https://farm8.staticflickr.com/7867/33368297198_ab97e22eee_c.jpg

https://farm8.staticflickr.com/7906/33368296158_0008f93395_c.jpg

https://farm8.staticflickr.com/7893/33368296358_28affb7f07_c.jpg

[240sxRuinedMe]

I don't know why but that cobalt green and the red tint kouki tails look so good.

Keep up the build definitely subscribing to see where this goes.

[s14fiend]

I don't know why but that cobalt green and the red tint kouki tails look so good.

Keep up the build definitely subscribing to see where this goes.\

That's cause watching it is like Christmas all over again.

Is there a thread on how to tint kouki tails like that?

[dizzariot]

Yeah man 16' haha
You had that hatch there with the s15 seats and TE's right?
Well the black one is my friends which now has the SR that was on my zenki.

Yeah that's me lol. I live in Japan right now but I still have that car. I miss it a lot :/

Happy to see your car here finally. Both of your cars were super nice and a lot of people can learn from you. I dig the whole LS thing because we're from CA and I know how shitty it is for cars. Looking forward to seeing the car completed!

[spooled240]

Looking good so far!

[Aesthetics45]

So clean, keep it up!

[s1421]

Yeah man pretty much only reason im doing the Erod kit cuz of the Ref.
Thanks!
Going to start on the interior next. Still debating wether to run the SF rear seat delete panels& door cards on it or not.

[513s13]

Looking killer. In the midst of LS3 swapping my s13 and was curious what length Sikky relocation shifter you decided to use as I also have the t56 magnum and the QuickTime bellhousing. They have told me via email that it's not needed and I know that's not correct

[s1421]

Havent had that much time to work on the car these past weeks but some progress was made!
It was time now to start fitting the engine in the car..
https://live.staticflickr.com/65535/40706573103_40e1ef36df_c.jpg
https://live.staticflickr.com/65535/46757052595_279305abd0_c.jpg

Installed the McLeod Mag Force, along side the Tilton TOB
https://live.staticflickr.com/65535/47620057962_b7b4de8cf9_c.jpg
https://live.staticflickr.com/65535/33795486428_cfc1b67c27_c.jpg
https://live.staticflickr.com/65535/33795486488_01c27b286c_c.jpg

since the car no wheels , I found a good deal from local guy and picked up some LMGT4

https://live.staticflickr.com/65535/47672891641_68afe7651b_c.jpg

https://live.staticflickr.com/65535/46757064865_24f2a99327_c.jpg

https://live.staticflickr.com/65535/33795498078_aa5a374afe_c.jpg

With the removable core support made install of the LS a breeze!

https://live.staticflickr.com/65535/33795498878_cdae8febb5_c.jpg

decided to send the car out to my Buddys shop to get the exhaust done first. sent the car out as of today. I will try to get pics of how the exhaust system is made when I go over to help.

https://live.staticflickr.com/65535/32730104857_288161c65a_c.jpg
https://live.staticflickr.com/65535/32730104747_4b4b8abcc0_c.jpg

[da_crew10]

DAMN this got even better!

[jumpman2334]

love the wheel and brake setup. looks killer. great taste in tools too. :)

[brndck]

oh dude this is SO good!!! TE37 Saga is the best spoke design out of all the TE imo.
Cannot go wrong with LMGT4 either.

[dbeiler]

Those massive brakes really fill up the wheels. I know the 6-piston requires at least an 18" wheel but it looks pretty unforgiving in the offset department as well. Any chance you could measure the clearance next time you have the wheels off? I would be eternally grateful.

Here is Wilwood's clearance measurements for example. Sorry for cluttering up the thread.
https://www.wilwood.com/Images/BrakeKits/WCD_Drawings/WCD_dwg-Large/ds545_wcd-lg.jpg

[s1421]

Exhaust is done on the car for now. 2.5'' pipe coming out of the manifold flange to clear frame and steering column. Space is tight but not impossible.

https://live.staticflickr.com/65535/40716420533_335cdd9d21_c.jpg

https://live.staticflickr.com/65535/32739556917_6c13a42f92_c.jpg

https://live.staticflickr.com/65535/32739556877_db4dda5af6_c.jpg

https://live.staticflickr.com/65535/40716420313_72beb18190_c.jpg

https://live.staticflickr.com/65535/47629695342_b5d93a0e5a_c.jpg

https://live.staticflickr.com/65535/33805132198_048a6be333_c.jpg

Ended the exhaust with the Reinhard Tip
https://live.staticflickr.com/65535/46766603485_c46a6ac16d_c.jpg


Got the car back home. Going to start now on mocking things up to see where im going to want stuff to sit in the bay.

https://live.staticflickr.com/65535/40818668293_4c0642365d_c.jpg

https://live.staticflickr.com/65535/47784826161_95444b1cdc_c.jpg

I also have the stock center part of the core support, don't know if state ref will make a big deal of the dimple core support so ill maybe swap it out when I take the car in. Snorlax looks empty with no AC condesor or front mount after many years of seeing with them on. haha

https://live.staticflickr.com/65535/47784826141_e80f7c6d12_c.jpg

[FaLKoN240]

State ref only cares about emissions and smog equipment.

[afishysilvia]

Looking good bro, I’d look at moving that intake lower. My IAT’s were stupid high like that.

[2fastandfurious]

Can’t wait to see this beast running.


Sent from my iPhone using Tapatalk

[kanyedian]

Very freaking cool! Dig the progression over the years.

[s1421]

Engine harness is getting installed at the moment trying to put heat sleeves on the section of the harness were it will be getting to hot.

Went to parts too and bought some heater hoses. Will be switching to AN later.
Took measurements of the amount of wiring i will need for the chassis harness aswell.
Once I get that sorted out I will need to start assembly of interior. Will get pics up later of this lil progress.

[s1421]

havent updated this but car has been coming along. I have been changing things up to try to get the car running asap.

worked on cluster to fit the AIM MXG.

https://live.staticflickr.com/65535/48237322727_40d725558c_c.jpg

https://live.staticflickr.com/65535/48237322337_13b1d36fdb_c.jpg

Finalizing last bit of chassis wiring. Every single harness was made new from headlights to the rear taillights and everything in between.

https://live.staticflickr.com/65535/48237323217_d9ecedb1d8_c.jpg

https://live.staticflickr.com/65535/48237323702_e1b909945a_c.jpg

https://live.staticflickr.com/65535/48237237471_16be0b1413_c.jpg

https://live.staticflickr.com/65535/48237323422_7ea951eb00_c.jpg

https://live.staticflickr.com/65535/48237237781_18b9792cf9_c.jpg

Still working on window wiring, locks, side mirrors etc.. but major wiring is done just need to install them.

chasebay powersteering

https://live.staticflickr.com/65535/48237325502_ea6325f720_c.jpg

chase bay coolant overflow

https://live.staticflickr.com/65535/48237238696_8a06533074_c.jpg

location of the engine fusebox might move it once my inspection is done

https://live.staticflickr.com/65535/48237235341_8d48936f64_c.jpg

Canister mounted didn't get crazy with brackets just got 2 pieces of aluminum and u-shape bend

https://live.staticflickr.com/65535/48237321547_be6e0224dd_c.jpg

sikky oil filter mounted where AC condensor would normally go

https://live.staticflickr.com/65535/48237326337_995227986e_c.jpg

was planning on running heater too but decided to take it off last minute

https://live.staticflickr.com/65535/48237306952_dba580dd55_c.jpg

https://live.staticflickr.com/65535/48237306777_a80c068909_c.jpg

[s1421]

got some Nismo lugs to go with my LMGTs

https://live.staticflickr.com/65535/48237218751_f0b81cc94e_c.jpg

https://live.staticflickr.com/65535/48237219901_f2f00be594_c.jpg

https://live.staticflickr.com/65535/48237219721_196357f84f_c.jpg

hadn't seen the car with front end on in a while... missed it
hood dampers were on of my favorite new mods much more room without that annoying hood prop

https://live.staticflickr.com/65535/48237304892_99d304542f_c.jpg

https://live.staticflickr.com/65535/48237304812_1fb03da93b_c.jpg

https://live.staticflickr.com/65535/48237217886_90bfcc8942_c.jpg

https://live.staticflickr.com/65535/48237217876_229facd700_c.jpg

switched all halogen bulbs to LED everything
rear bumper got scratched up by garage door at one point oh well... haha

engine turned on first try and sounds good with that Reinhard...only leaks were from fuel and power steering.. turned out the fittings were still lose tighten them up and no leaks after that..
going to throw 1 seat in sometime this week for its first drive around the block.
going to route intake down to bottom once I drive it to the shop.

[Agamemnon]

Top notch duder!
I expect vids and a full parts list!

[2fastandfurious]

Looks so good with the front end and that rear diffuser. [emoji1786]


Sent from my iPhone using Tapatalk

[Jo_Galezo]

Awesome!! Lets see a pic of how the lugs look on :)


Sent from my iPhone using Tapatalk

[Tignometry]

Straight fire! This motivates me to update my build thread haha!

[s1421]

Took the car this weekend to detail the interior and exterior...we had an accident of spilling fluid on the carpet so that why i decided to clean it now with the dash out so i can clean the carpet easier.

https://live.staticflickr.com/65535/48291355306_10e367a0b8_c.jpg

https://live.staticflickr.com/65535/48291456997_3332ff7fd9_c.jpg

https://live.staticflickr.com/65535/48291456892_b2282613e0_c.jpg

Paint is still in decent shape has bunch of scratches due to the small work space we have in the garage but ill be painting the car again in the future...

[s13poop]

fuck yeah JP

its coming out amazing! :bigok:

[jumpman2334]

i love how the blue contrasts against the yellow calipers. so rad.

[s1421]

havent updated in a while but car is pretty much done!

The car went to my buddies shop to make an intake for it. IAT were super high with the sikky intake it had, especially the days when it was hot here in so-cal, so we moved it down. got a full 4'' intake. I brushed the raw aluminum and then shot it with clear.

https://live.staticflickr.com/65535/48857122063_8a0ab86e7e_c.jpg

https://live.staticflickr.com/65535/48857675147_5513dee05a_c.jpg

the morning of the inspection moment of truth!


https://live.staticflickr.com/65535/48857121658_9b5f0a7a94_c.jpg

https://live.staticflickr.com/65535/48857674817_cdaf4498d5_c.jpg

https://live.staticflickr.com/65535/48857674777_bab6aac5e1_c.jpg

https://live.staticflickr.com/65535/48857674977_e94df28fa0_c.jpg

[s1421]

So I failed the inspection because Im not able to use the AIM cluster( stock engine light needs to be present thus meaning the stock cluster needs to be hooked up). Second 3 of my monitors are still not ready so car needs to be driven more for those monitors to clear. Other then that visual inspection is good!


https://live.staticflickr.com/65535/48857545011_c15810fcf6_c.jpg
(afishysilvia) coming out to help with a code that isn't going away. P0315 crank relearn, this code doesn't throw a CEL but scanner still reads it. we've done the relearn with 3 different tools and still reads pending/permanent.

https://live.staticflickr.com/65535/48857188653_dd18e39dd7_c.jpg

https://live.staticflickr.com/65535/48857735127_a7a0a2dc15_c.jpg

https://live.staticflickr.com/65535/48857735057_13009a3cc8_c.jpg

https://live.staticflickr.com/65535/48857127278_cbd9bf2c05_c.jpg

https://live.staticflickr.com/65535/48857483401_dff586eb21_c.jpg

https://live.staticflickr.com/65535/48857483431_bbe81fb0a5_c.jpg

took out the car for some nice drives and some pictures. for now I will be driving the car more often to try to get the monitors ready and reschedule another inspection. feels so close but yet so far to have this thing finally BARd.

[s1421]

fuck yeah JP

its coming out amazing! :bigok:

Thanks buddy!!!

[s1421]

i love how the blue contrasts against the yellow calipers. so rad.

Thanks man!! I love the contrast also....was debating in doing them nismo silver but that might happen later on.. for now ill keep them yellow

[240_]

awesome build. and the way the car looks is just perfect. would love to see it one day in person. my brother lives in Irvine.

[s1421]

awesome build. and the way the car looks is just perfect. would love to see it one day in person. my brother lives in Irvine.

Thanks man. Yeah we usually at the wednesday night meets on jeffrey in irvine if you want to see it there.

[S14rebuild]

Bruhhh...them brakes.....jezussss

[afishysilvia]

Don’t worry we will get you smog legal. At least you will be haha. I’m still pissed I slept in for those pictures with the Altezza. Let’s see some interior pics :yum::cj::kiss:

[Initial Drift]

God dude! That's sweet. I also want to move to a e-rod engine but my dumb ass owns a 96. Mad props on the clean install. Def going to have to hit up the Irvine meet and see this in person.

[s1421]

Dam need to update this soon haha

[apex128]

California emissions are a nightmare. Perhaps you can register the car to one of the few counties not required if you have a relative there. The car looks really nice, I appreciate maintaining the Zenki with conservative aero.

[Initial Drift]

California emissions are a nightmare. Perhaps you can register the car to one of the few counties not required if you have a relative there. The car looks really nice, I appreciate maintaining the Zenki with conservative aero.

Only until he gets it reffed. Then it will be a breeze unless he messes with the equipment after

[afishysilvia]

Dam need to update this soon haha

Most humble dude I know, congrats my brother.

Fucking Merica! I’m gonna leave this right here for all you LS lovers haha!!

http://www.superstreetonline.com/features/1995-nissan-240sx-legalize-it/

Nuff said.

[[240sx]]

An article feature for the easiest & Cheapest swap ever in the history of hot rodding?
https://uploads.tapatalk-cdn.com/20200207/d695a39db0c2c966f9f55cb0029a3ba6.gif

*HEAVY starcasm*

Love this car. [emoji106]

Sent from my SM-G970U using Tapatalk

[s1421]

Havent updated this in a minute.


Pics from SS feature.


https://live.staticflickr.com/65535/49512816233_50a59c3672_z.jpg


https://live.staticflickr.com/65535/49512816228_31abcf3446_z.jpg

https://live.staticflickr.com/65535/49513332081_6f619546e3_z.jpg

https://live.staticflickr.com/65535/49513332226_a6bacd3136_z.jpg

https://live.staticflickr.com/65535/49513555987_8066718aa6_z.jpg

https://live.staticflickr.com/65535/49513555997_a5862eb2cb_z.jpg

https://live.staticflickr.com/65535/49513556082_eed5b884d6_z.jpg

https://live.staticflickr.com/65535/49513556132_aa4079ac51_z.jpg



Some cool cars from the Greddy Performance Meet.


https://live.staticflickr.com/65535/49512835233_62bc2fb9c3_c.jpg

https://live.staticflickr.com/65535/49512835428_c17f51f4d2_c.jpg

https://live.staticflickr.com/65535/49513352046_44fabab8a9_c.jpg

https://live.staticflickr.com/65535/49513352176_66eca6a2da_c.jpg


My Buddys car before I painted it ( should of kept this one)!

https://live.staticflickr.com/65535/49513350986_1bfcaf3edb_c.jpg

https://live.staticflickr.com/65535/49513350956_b341ef4e80_c.jpg

We went with the oe 326 white
jams, and exterior were sprayed along with amber corners
had to sell him the orange silvia seats
really like the color scheme it has with bronze LMs

https://live.staticflickr.com/65535/49513574822_6f6d790b36_c.jpg

https://live.staticflickr.com/65535/49513350621_a964a124ba_c.jpg

Quick pic Snorlax & Gangar together, and before I had to get rid of the orange s15 seats

https://live.staticflickr.com/65535/49513676402_3a2f059b5a_c.jpg

https://live.staticflickr.com/65535/49513575262_2c1a15687c_c.jpg

[afishysilvia]

S14 King..... lol

[gzus9]

Man that is a good looking s13 :eek2:

[spooled240]

Wow this car has changed quite a bit since I last seen it. I'm in SD now and I miss those Wednesday meets :(

Congrats on the SS article!

[AndrewS13]

This build is so clean. Nice job doing everything right

[FaLKoN240]

Do you mean Gengar?

[s1421]

Wow this car has changed quite a bit since I last seen it. I'm in SD now and I miss those Wednesday meets :(

Congrats on the SS article!

Thanks man..

When are you coming down to a meet!?

[s1421]

This build is so clean. Nice job doing everything right

Thank you man :wavey:

[s1421]

Do you mean Gengar?

Yeah typo my bad haha didnt catch that

[s1421]

something came in finally after 8 month wait
https://live.staticflickr.com/65535/49644819582_29ce64153f.jpg

https://live.staticflickr.com/65535/49644819622_a7ffebe7d8.jpg


I don't know if I should color match this or leave it exposed???
hood was open in this pic haha

https://live.staticflickr.com/65535/49644537426_3cc05ded68_c.jpg

[[240sx]]

I don't know if I should color match this or leave it exposed???
Considering how clean your car is... I vote color match. Maybe preserve the Cf, and have it wrapped instead?

[marveluz]

Or can you do candy paint that does both? Color match and visible cf?


Sent from my iPhone using Tapatalk

[afishysilvia]

I vote put that shit on blast...leave it CF. Its smog legal man, hell yea rock it cause you can.

[s1421]

Random picture upload Havent updated thread in a while.
Nothing new on car just the hood.

https://live.staticflickr.com/65535/50016824441_6426ebaa86_z.jpg

https://live.staticflickr.com/65535/50016295403_41229b45e7_z.jpg

https://live.staticflickr.com/65535/50016295573_0e382e5afe_z.jpg

https://live.staticflickr.com/65535/50016295673_009f4ac087_z.jpg

Also took off diffuser, forgot how high the rear looks without it. Will update with more pics soon.

[Tignometry]

Lovin the hood 🔥 🔥 🔥

[s13poop]

hood is soooo sick!

[-kenny-]

I never like aftermarket hoods. But this one flow so well with your front end. Looks good. Ls3 looks so perfect in the bay

[shaggyjake]

*heavy breathing*

oh, i like that

[s1421]

I never like aftermarket hoods. But this one flow so well with your front end. Looks good. Ls3 looks so perfect in the bay

Thanks man

[2_Liter_Turbo]

Finally had a chance to check out the build thread man. Car looks awesome. What changes are you doing to it (since you no longer have the trunk, LOL)?

[s1421]

Finally had a chance to check out the build thread man. Car looks awesome. What changes are you doing to it (since you no longer have the trunk, LOL)?


new look since I dont have the trunk anymore and sold to you lol
afishysilvia in the back haha
https://live.staticflickr.com/65535/50773517072_d6de981fd9.jpg

[afishysilvia]

Ayyyyyy haha.

Show off that new part you got since I’m not installing mine yet!!!

[s1421]

Got these badges in old Nismo font to go on full carbon

https://live.staticflickr.com/65535/50803429828_8a97024cf6.jpg

Decided to throw them on the fender instead of 1/4 panel only have this pic. LMs were off because I gave them a good polish + ceramic coating

https://live.staticflickr.com/65535/50804178086_7b6c97ee78.jpg

https://live.staticflickr.com/65535/50804178001_44aec1cbc3.jpg

[-kenny-]

I love them ctsv 6 pistons. Kinda wish I done those instead of Evo brembo

[s1421]

I love them ctsv 6 pistons. Kinda wish I done those instead of Evo brembo

Only down side is the wheel options. Cant run 17s which was what i wanted to run when it steps on the track.

[-kenny-]

Only down side is the wheel options. Cant run 17s which was what i wanted to run when it steps on the track.

I saw someone they it clear 17 inch wheel Kansei. I guess it can depends on what wheels company

[s1421]

Need to update this...

[s1421]

So about 2 months ago this happened! Havent had chance to update but here we go with few small changes. Car is officially BARD! I was having a hard time for the monitors to clear but after consistent driving the monitors cleared.
https://live.staticflickr.com/65535/50907460872_e251f87232_z.jpg


After it passed a small change up went underway. Order some of these
https://live.staticflickr.com/65535/50907459447_b79cd2080c_z.jpg

and this
radium fpr/rail/fuel filter
https://live.staticflickr.com/65535/50904692948_64bfaef711_z.jpg

and this
https://live.staticflickr.com/65535/50907331641_775216027f_z.jpg
https://live.staticflickr.com/65535/50906632273_3fe41bcdef_z.jpg

and this
https://live.staticflickr.com/65535/50907333171_d77b998e56_z.jpg

and finally these to finally put the power down
https://live.staticflickr.com/65535/51024126178_094652da85_z.jpg
https://live.staticflickr.com/65535/51024125913_22bc5e3395_z.jpg

[s1421]

Put the oil cooler infront of radiator. Wanted to put it off to the side but my canister is on one side and intake filter on the other. So down in the center it was.

https://live.staticflickr.com/65535/50905517232_c46d69dcf5_z.jpg

-20 went on the rad and pump to switch up the ugly rubber hose.

https://live.staticflickr.com/65535/50905393031_645a8b198b_z.jpg

KATECH goodies installed

https://live.staticflickr.com/65535/50905393161_786504ae38_z.jpg

https://live.staticflickr.com/65535/50907333131_1bbd351043_z.jpg

https://live.staticflickr.com/65535/50906633718_caf9a87ee7_z.jpg

almost forgot TFF catch can setup swell

https://live.staticflickr.com/65535/50907461082_918a249439_z.jpg

[s1421]

This is how snorlax sits currently. Ordered a LRB undertray, cooling panel, spare tire cover. I will update once those things come in.

[afishysilvia]

When are we racing

[s1421]

When are we racing

Whenever lol
Ill let you start pushing now if you want haha

[s13poop]

Congrats brother can’t wait to see this in person :bigok: