S14:Koni 8611 w/ veilside180sx housings full set

[Stealthyfish]

Looking to sell my set of 8611s:

8611-1257RACE front and rear double adjustable shocks
2x Koni rebound adjuster knobs
S14 Veilside180sx housings with Z32 provision in the rear
Ground control spring perches
Torrington bearings on the perches to prevent spring bind
Tein pillowball front and rear top hats
Hypercoil 650# front springs
Eibach 550# rear springs

https://photos.smugmug.com/Other/S14-Parts-FS/n-Jqpmkj/i-Rcv3NQq/0/6178f7a1/XL/i-Rcv3NQq-XL.jpg

https://photos.smugmug.com/Other/S14-Parts-FS/n-Jqpmkj/i-dxrRR23/0/ad292653/XL/i-dxrRR23-XL.jpg

https://photos.smugmug.com/Other/S14-Parts-FS/n-Jqpmkj/i-krwLN2W/0/e18a1486/XL/i-krwLN2W-XL.jpg

I can swap the springs out as well for no additional cost. I have extra pairs of:

Eibach 2.5 ID x 6" 700#
Eibach 2.5 ID x 6" 450#
Eibach 2.5 ID x 6" 350#

These inserts were purchased brand new through a Koni vendor on Jan 13th, 2018. They're in great shape with <500 public road miles and 7 track events, 4 of which were run at low speed in the rain. These shocks have been nothing short of fantastic; just going in a different direction with the car.

I can also include a pair of Z32 NA rear uprights with stock bushings and conical ball joint spacers at the asking price if requested.

Asking SOLD shipped to the lower 48

Will consider reasonable offers and wheel trades. Looking in particular for 18x10.5 -5 to +20 offsets OR 18x11 0 to +15 square sets.

[afishysilvia]

Am I missing something? These are priced more than top of the line coilovers? $2200?

[e1_griego]

These are top of the line coilovers.

This setup costs well over $3k to put together new.

[Stealthyfish]

Am I missing something? These are priced more than top of the line coilovers? $2200?

Tippy-top of the line really goes quite a ways above 2200. These are off of Koni's double adjustable race line-up of shock inserts; performing well above KW and GC's off the shelf offerings for S chassis.

These are top of the line coilovers.

This setup costs well over $3k to put together new.

QFT

[Coupes_FTW]

These are top of the line coilovers.

This setup costs well over $3k to put together new.


this

characters limitations

[Stealthyfish]

Back to the top

[Def]

Am I missing something? These are priced more than top of the line coilovers? $2200?

haha - I bet you think some Fortune Auto's are "top of the line?" :keke:

[afishysilvia]

haha - I bet you think some Fortune Auto's are "top of the line?" :keke:

It was a simple question after I saw some clapped out looking coils. After I read through found plenty of info on this setup, including it doesn’t go to the low I’m looking to achieve. Even after reading, still wouldn’t spend that much, but someone will. Thanks for your comment though :cj:

[Stealthyfish]

Bump it up. This setup is defintely as other posters have been saying, they truly are a level above the rest of the offerings for S chassis. I can confidently say they're better than custom built feal 441s having owned a set prior to this one. It was worth every last dime.

Just a note about ride height, the rear housings on this kit are very low. This pic was shot at 1/2 perch height setting in the front and the top of the perches in the rear. The fronts still had ~2" of travel at this ride height with 0 chance of bottoming out:

https://photos.smugmug.com/photos/i-whqf3ZB/0/X4/i-whqf3ZB-X4.jpg

[RalliartRsX]

Talks about top of the line coils.....states these don't go low enough hahahahah.

The two are mutually exclusive. Top of the line coils are focused on damping, not dumping

[Def]

Yea, I'm not sure where this "they don't go low" talk comes from. Maybe the very very early prototypes, but after that they have plenty of travel to get very low. You'll run decent size tires into the unibody before you run out of damper travel really.

[Stealthyfish]

Bump. Will consider reasonable offers and wheel trades. Looking in particular for 18x10.5 -5 to +20 offsets and 18x11 0 to +15.

[Stealthyfish]

Bump. There's gotta be a few S chassis guys out there looking for as much grip as they can get.

[jumpman2334]

would it have killed you to clean these?

[Stealthyfish]

would it have killed you to clean these?

Lmao. I'll clean em and put photos up but the parts should speak for themselves. I've always thought to leave them dirty so people can validate external leaks or damage.

[da_crew10]

These suq , ISIS coilovers are way cheaper and go way lower and have a terrorist acronym!

GLWS OP

[Stealthyfish]

Bump. Priced dropped to 2k obo.

[Stealthyfish]

Took a trade of freshly built Koni 8610-1436. Once they show up, new asking price will be 1800 obo

[Stealthyfish]

Update: set is sold

[jumpman2334]

These suq , ISIS coilovers are way cheaper and go way lower and have a terrorist acronym!

GLWS OP

isis is now wuzwuz