PDA

View Full Version : where does your clutch grab

XxJaPxOxNeEs23xX
11-10-2004, 11:32 AM
sorry if this has been covered before but i suck at searching nd i cant find it. but i just installed act 4 puck about 2 months ago, and it still bothers me that the clutch grabs at almost the very top. my old on grabs near the center, but this one is way at the top maybe about a 5 mm before freeplay.
Ian
11-10-2004, 11:38 AM
did you bleed your clutch out really good?
Flybert
11-10-2004, 11:39 AM
Do a search for "clutch pedal adjustment" and go from there. No handouts.
XxJaPxOxNeEs23xX
11-10-2004, 11:41 AM
i ddnt bleed it at all
XxJaPxOxNeEs23xX
11-10-2004, 11:42 AM
but i wanted to know if that was a normal position or is it not?
wootwoot
11-10-2004, 12:51 PM
Do a search for "clutch pedal adjustment" and go from there. No handouts.
its adjustable...
wootwoot
11-10-2004, 12:52 PM
Do a search for "clutch pedal adjustment" and go from there. No handouts.

its adjustable...
nissandr1ft
11-10-2004, 07:48 PM
If you do bleed your clutch, make sure to get rid of that weird damper. Just bend the line with hands or tubing bender(better choice). You'll get a better clutch feel.
old_s13
11-10-2004, 08:34 PM
ever looked at your clutch master cylinder, pal? you can adjust the adjustment point from there, and, you can adjust the freeplay with the bolt on the pedal. do this, and you can have a VERY nice pedal feel.

get an FSM you lazy bastard, this is basic mechanical knowledge. :)
XxJaPxOxNeEs23xX
11-11-2004, 01:33 AM
i konw i can lower the position but even tho i lowered it today and yeh it lowerd the whole pedal, but it still engages at the end of the rod. i want it to engage in the middle were i have to push with force on the clutch half way and thats were it disengages. and it engages half way back to the top
Flybert
11-11-2004, 02:13 AM
If you want the engagement to be in the middle, that shit is all up to you. Just think about how the actual mechanism works and figure it out from there. And most of all, have fun!!! I think we've all been down there trying to get that shit right. It doesn't help when you have humongous bride bolsters in the way.