Distributor wont Slide in

[mattrobertsxn]

Said i wouldnt make another post but i dont have time to diagnose i need my shit running ive tried to figure it iut but cant. Just did my headgasket, with motor in car. Timed the motor to the marks i made before pulling it apart, looked at pictures i took as well.

I cant slide the distributor in, i tried putting some grease on it but it wont help.

I cranked the motor and made sure its compression stroke at TDC


Sent from my iPhone using Tapatalk

[kyral]

Said i wouldnt make another post but i dont have time to diagnose i need my shit running ive tried to figure it iut but cant. Just did my headgasket, with motor in car. Timed the motor to the marks i made before pulling it apart, looked at pictures i took as well.

I cant slide the distributor in, i tried putting some grease on it but it wont help.

I cranked the motor and made sure its compression stroke at TDC


Sent from my iPhone using Tapatalk

did you get the head machined at all? that can cause this. otherwise twist it a little and jiggle while jamming it in

[jedi03]

If you use the wrong o-ring can cause this too...