View Full Version : dynoed yesterday guys, results inside.
crazy9ceguy
11-08-2004, 09:32 AM
i have a 95 s14 with a s13 redtop. i dynoed 239 rwhp and 230 torque at 12.5 psi. my mods are:
t28 turbo
manifold
blitz downpipe
3" highflow cat
apex gt spec catback
blitz fmic
blitz fuel pump
i think i was running lean a bit, i heard pinging at high rpms and my manifold started to flow red. hehe too bad i was at the bottom of the list in standings, at least i beat all the bmws. r32 gtr made 606 rwhp.
wootwoot
11-08-2004, 10:55 AM
you diddnt have a wideband hooked up to check your a/f? how much boost were you running?
TUnity2
11-08-2004, 11:20 AM
how much boost were you running?
i dynoed 239 rwhp and 230 torque at 12.5 psi.
reada da posta
Seems a little on the low side...
crazy9ceguy
11-08-2004, 12:59 PM
well i didint have it tuned or had any after market eletronics hooked up to my car. held all the way to redline, didnt drop a bit. i was happy.
RBS14
11-08-2004, 01:04 PM
yea, sounds on the low side to me too, do some tuning then make a couple more pulls.
to give an example, at 15.5 psi, i pulled 283whp out of a T28...
RBS14
11-08-2004, 01:19 PM
Puss n boots!
I love kitties!
Flybert
11-08-2004, 02:57 PM
You were boosting 12.5psi on a sidemount? You probably heat soaked that shit and that's why your numbers are low.
blitz fmic
I don't see a sidemount here. ;)
KoukiMonster
11-08-2004, 04:09 PM
You were boosting 12.5psi on a sidemount? You probably heat soaked that shit and that's why your numbers are low.
reading comprehension pwns you.
crazy9ceguy
11-08-2004, 04:14 PM
Halo what kind of mods did you have to make that much power?
Bolts-ons...
550cc
Z32
Retuned ecu
Custom FMIC
Elbow-back 3"
Clutch/Flywheel..
a few more things that I don't remember...
check member rides, substract Elbow,manifold, replace T25 with T28 and add Tuned ECU.
RBS14
11-08-2004, 04:31 PM
that blitz fmic could be costing some HP too........ you really don't need an IC the size of a semi. Blitz core efficiency isn't that great either, like ~1.5-2psi pressure drop.
crazy9ceguy
11-08-2004, 08:54 PM
i got the older one, smaller.
Vatche
11-09-2004, 12:00 AM
its easy to pull horsepower out of a turbo with the right mods.....
i dynoed at 210 whp 226 lb/ft at 8 psi on a T25 w/ only 2.5" exhaust, fmic, fuel pump, no electronics
crazy9ceguy
11-09-2004, 12:18 AM
sounds a bit on the low side to me.
Flybert
11-09-2004, 01:55 AM
reading comprehension pwns you.
AHAHA yes it does, yes it does.
KoukiMonster
11-09-2004, 11:27 AM
AHAHA yes it does, yes it does.
:p
ldfiajf;kasjfl;skj;slakdjfsa
sciamop
11-09-2004, 02:06 PM
i have a 95 s14 with a s13 redtop. i dynoed 239 rwhp and 230 torque at 12.5 psi.
I think it's fucking awesome that your car laid down those numbers with MINOR (read as 'cheap') mods! It's equally impressive that other posters think there's a bit more power with additional tuning. Long live the SR!
What's the SOTP verdict?
Todd
sepulchral
11-09-2004, 02:24 PM
ur motor was pinging and it didnt bother you? always run proper fuel, whenever u change the turbo no matter the boost ammt change the fuel
change the fuel every time you change the turbo? why is that?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.