offthewall
07-25-2018, 10:01 PM
Hey everyone,
Located: Paw Paw, MI 49079
Asking Price: $9,800 w/o wheels
With wheels: $11,800
It's time for me to put up my chassis for sale. I'm getting a little ahead of my self but I want to get it up and listed now. I also don't want the pictures confuse anyone since the car has changed a little since.
My end goal is to offer a chassis that is complete as possible. The car will not be sold with an engine, transmission or engine harness and a few other misc parts. There's a lot going on and of course through PM we can clear things up as they go.
The Break down: Parts w/o "new" next to them have maybe 300 miles on them.
Chassis: 1991 S13 Coupe (Clean title)
Front/Rear Suspension:
*DGR Coilovers w/ Hypercoil springs (8k/8k?)
-Rear coilovers have been rebuilt by FEAL
*GKtech LCA's
*Gktech pro caster plates (New)
*GKtech Outer tie Rods (New)
*GKtech V4 Pro Knuckles (New)
*S14 5 lug hub bearings (less than 5000 miles)
*Modified steering rack location, moved forward 45mm (will be swapped in when engine is pulled)
*S14 inner tie rods (new)
*Evo 8 front calipers/rotors - TF Work Adapters
*Z32 Rear calipers
*SPL Rear camber arms
*SPL Toe arms
*Gktech traction arms (New)
*Gktech solid subframe bushings (new)
*Rear subframe has been reinforced using Gktech v2 kit (recently done)
*Stock axles w/ stock welded diff
*Stock rear LCA's/Stock knuckles
*5 lug rear wheel bearings (less than 5000 miles)
*WSRD Brake booster deleted
*Willwood clutch master cylinder
Exterior/ Interior:
-Silvia front end/ OEM Tripple headlights (no corners)
-Rocket Bunny v1 Silvia front bumper
-Originlab 75mm front fenders (new)
-Originlab 75mm rear fenders (new)
-OEM rear bumper
-"FD" spec roll cage - 1.5" DOM Tig welded
-Spacro Evo III Seat
-Spacro Evo 6 point harness
-Flocked S13 Dash
-Nardi Deep corn steering wheel
*Power windows
Fuel:
Aeromotive FPR
Aeromotive in-line (stainless element) fuel filter
Hood is SOLD and pictures are currently with the old fenders. Updated pictures are going to be uploaded ASAP. Cosmis wheels were sold
Car is a track car, built primarily for it. The chassis is set up for the radiator to be in the rear, i've recently removed the rear window and cut the spare tire well out to fabricated a fuel cell and new radiator set up.
Extra's that can be negotiated:
*BNIB Whiteline rear sway bar
*BNIB Gktech front sway bar
*New 19"x30" Dual Pass Alm. Allstar Radiator
Current Wheels
*JDM SSR Koenig, 5x114.3
*18x11 (-9) 265/35/18 Falken Azenis (pictured in the rear)
*18x13 (+4) 315/30/18 Falken Azenis
https://i.imgur.com/VWxLfzUl.jpg
https://i.imgur.com/VHkZh8Ll.jpg
https://i.imgur.com/BTqyTcXl.jpg
https://i.imgur.com/RYvsnn6l.jpg
https://i.imgur.com/79H3m6ul.jpg
https://i.imgur.com/eAnWDTdl.jpg
https://i.imgur.com/Y9Nf7RHl.jpg
If you are serious about this and have questions regarding anything about the car. PLEASE let me know. Texting/calling is going to be the easiest for now. 269-TWO 70-FIVE FIVE 4 TWO.
Thanks,
Joe Whalen
Located: Paw Paw, MI 49079
Asking Price: $9,800 w/o wheels
With wheels: $11,800
It's time for me to put up my chassis for sale. I'm getting a little ahead of my self but I want to get it up and listed now. I also don't want the pictures confuse anyone since the car has changed a little since.
My end goal is to offer a chassis that is complete as possible. The car will not be sold with an engine, transmission or engine harness and a few other misc parts. There's a lot going on and of course through PM we can clear things up as they go.
The Break down: Parts w/o "new" next to them have maybe 300 miles on them.
Chassis: 1991 S13 Coupe (Clean title)
Front/Rear Suspension:
*DGR Coilovers w/ Hypercoil springs (8k/8k?)
-Rear coilovers have been rebuilt by FEAL
*GKtech LCA's
*Gktech pro caster plates (New)
*GKtech Outer tie Rods (New)
*GKtech V4 Pro Knuckles (New)
*S14 5 lug hub bearings (less than 5000 miles)
*Modified steering rack location, moved forward 45mm (will be swapped in when engine is pulled)
*S14 inner tie rods (new)
*Evo 8 front calipers/rotors - TF Work Adapters
*Z32 Rear calipers
*SPL Rear camber arms
*SPL Toe arms
*Gktech traction arms (New)
*Gktech solid subframe bushings (new)
*Rear subframe has been reinforced using Gktech v2 kit (recently done)
*Stock axles w/ stock welded diff
*Stock rear LCA's/Stock knuckles
*5 lug rear wheel bearings (less than 5000 miles)
*WSRD Brake booster deleted
*Willwood clutch master cylinder
Exterior/ Interior:
-Silvia front end/ OEM Tripple headlights (no corners)
-Rocket Bunny v1 Silvia front bumper
-Originlab 75mm front fenders (new)
-Originlab 75mm rear fenders (new)
-OEM rear bumper
-"FD" spec roll cage - 1.5" DOM Tig welded
-Spacro Evo III Seat
-Spacro Evo 6 point harness
-Flocked S13 Dash
-Nardi Deep corn steering wheel
*Power windows
Fuel:
Aeromotive FPR
Aeromotive in-line (stainless element) fuel filter
Hood is SOLD and pictures are currently with the old fenders. Updated pictures are going to be uploaded ASAP. Cosmis wheels were sold
Car is a track car, built primarily for it. The chassis is set up for the radiator to be in the rear, i've recently removed the rear window and cut the spare tire well out to fabricated a fuel cell and new radiator set up.
Extra's that can be negotiated:
*BNIB Whiteline rear sway bar
*BNIB Gktech front sway bar
*New 19"x30" Dual Pass Alm. Allstar Radiator
Current Wheels
*JDM SSR Koenig, 5x114.3
*18x11 (-9) 265/35/18 Falken Azenis (pictured in the rear)
*18x13 (+4) 315/30/18 Falken Azenis
https://i.imgur.com/VWxLfzUl.jpg
https://i.imgur.com/VHkZh8Ll.jpg
https://i.imgur.com/BTqyTcXl.jpg
https://i.imgur.com/RYvsnn6l.jpg
https://i.imgur.com/79H3m6ul.jpg
https://i.imgur.com/eAnWDTdl.jpg
https://i.imgur.com/Y9Nf7RHl.jpg
If you are serious about this and have questions regarding anything about the car. PLEASE let me know. Texting/calling is going to be the easiest for now. 269-TWO 70-FIVE FIVE 4 TWO.
Thanks,
Joe Whalen