Relax, it's not a show car... [Archive] - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

afishysilvia

06-22-2018, 07:26 PM

What killed the rod bearings? Was the engine a dud when you bought it?

Why are you using a small cam and stock 241 heads on top of that wonderful forged rotating assembly? Why not just grind the crank and replace the rod bearings on your old rods?

Have you noticed a huge difference with the heat shielding on the trans tunnel? I could cook breakfast on my trans tunnel and I'm in need of some ideas to fix it.

Doesn't take you long to get things done! Looking forward to seeing your progress. Looks good!

The motor got starved from oil, plus being at 100k mileage already I decided to rebuild it. I got another crank and had it polished, went 0.10” over. The reason for going forged was having a buddy who a customer backed out on his purchase so I got these for a steal. The motor hasn’t been tuned yet, still dialing it in with cooling. In regards to the trans tunnel it’s been night and day, the DEI shielding has been great. The passenger compartment stays relatively cool so it’s definitely worth it if you’re thinking to reduce heat.

afishysilvia

06-26-2018, 07:26 PM

Lost Count Now

Small updates, had some noise from rockers so decided to go with the Comp cam kit.
https://i.imgur.com/zhQWztzh.jpg
https://i.imgur.com/GJOroB2h.jpg?1

Install Nismo power brace, and LRB Speed undertray which still needs to be modified for my oil filter.
https://i.imgur.com/WrhPxEAh.jpg
https://i.imgur.com/27XTObph.jpg
https://i.imgur.com/gOR8Vv2h.jpg

Installed a used lip I got, just some more shots.
https://i.imgur.com/E6TfTxnh.jpg
https://i.imgur.com/FklXjlsh.jpg
https://i.imgur.com/wA1rh1Lh.jpg

Next update:
-GT Spec fender braces
-New hood cable
-Harness tuck on fenders
-Bigger E-Fans to keep this thing cool

afishysilvia

06-26-2018, 08:17 PM

Current setup as of 6/26/18

https://i.imgur.com/a3cnh8gh.jpg

afishysilvia

07-05-2018, 02:02 PM

Updates 7/5/18

During the 4th I was able to get some stuff done...

Harness tuck and GT Spec fender braces.
https://i.imgur.com/IVdPVzyh.jpg
https://i.imgur.com/npf9K0zh.jpg

Mishimoto slim fans were shitty and not cutting it so I put these on.
https://i.imgur.com/YZfWOOWh.jpg

Wrapped the intake to help reduce IAT's, got it buttoned back up
https://i.imgur.com/eTKFuIvh.jpg

Debating doing a hood scoop, I simply cannot get enough airflow with my tight space.

anthony_240

07-05-2018, 03:59 PM

Nice [emoji106]
How’s she running now?

Sent from my iPhone using Tapatalk

afishysilvia

07-05-2018, 04:17 PM

Nice [emoji106]
How’s she running now?

Sent from my iPhone using Tapatalk

The heat today is definitely a good test, on the way to work it wasnt bad at all. Only reached about 190 cruising, but after I was off the fwy and getting on it about 210. Driving doesnt worry me, its traffic I just want to make sure that the fans can keep up. I've installed the LRB lower cooling panel too to see if it helps, that being said I've done a few things together so hard to say whats working or if it all is together. I am debating doing a DMAX scoop and cutting the hood. There goes my discrete appearance somewhat. :picardfp:

Kingtal0n

07-05-2018, 04:20 PM

I am going to open the small hole in the inner fender and take fresh air from that location. It rains all the time here and lots of big puddles to splash up, and I use a paper cone so water is no good with paper. It would probably disintegrate. So I am in a similar position and have been giving this much thought.

I think what I Will try is an aluminum panel that opens facing rearward, so it will not catch rain. And then open the hole some more (already opened it a bit as is).

The sickest solution is a large flat air cleaner embedded into the core support that feeds from the hood in such a way that is water-friendly. But that is unrealistic. However, a similar approach may be used if you have access to 3d printing, some kind of small box would be made to fit a space and use a common filter. Today though there are many cone style filters to choose from so its rarely a pressing issue. More like a finishing touch.

The main thing being of course, to keep the filter in the engine bay and protect it from water. While still giving it access to outside air. I am in the process of walling off that corner of the engine bay so that it only shares 'outside air' and not engine bay air. or something like that. I think I just had an idea...

The best fans I can recommend for all swaps are those Altima dual fans, $85 shipped from ebay works fantastic here in florida, ls no issues

afishysilvia

07-05-2018, 04:40 PM

anthony_240

07-05-2018, 08:54 PM

The heat today is definitely a good test, on the way to work it wasnt bad at all. Only reached about 190 cruising, but after I was off the fwy and getting on it about 210. Driving doesnt worry me, its traffic I just want to make sure that the fans can keep up. I've installed the LRB lower cooling panel too to see if it helps, that being said I've done a few things together so hard to say whats working or if it all is together. I am debating doing a DMAX scoop and cutting the hood. There goes my discrete appearance somewhat. :picardfp:

Yea dude that shit will be super aggressive at that point... well your going with that 15 front end right?

Sent from my iPhone using Tapatalk

afishysilvia

07-05-2018, 10:11 PM

Yea dude that shit will be super aggressive at that point... well your going with that 15 front end right?

Sent from my iPhone using Tapatalk

S15 front end is coming eventually. I have all the parts to do it finally, just trying to find the right body guy. I wanted to have car dialed in mechanically before I drop more money on it.

RVAE34

07-06-2018, 02:49 PM

Which lifters are those? If LS7, throw them in the garbage.

This is one of my LS7 lifters that was paired with a Comp cam. And I was not alone. Multiple threads on LS1tech with the same lifters. Hopefully you used something different but if not, I would swap them out.

https://c2.staticflickr.com/6/5765/23010882424_bb6ce373bb_c.jpg

https://c2.staticflickr.com/6/5747/23010882634_9f1a2be864_c.jpg

https://c2.staticflickr.com/6/5804/23530483432_661d8ff17b_c.jpg

greenwood

07-09-2018, 09:13 AM

Why not run an oil cooler setup to help keep engine cool.

You can chase coolant mods all day and it may help but the addition of a mocal thermostat oil cooler is beneficial in more ways than one.

afishysilvia

07-09-2018, 09:24 AM

RVAE34 - I went with the stock lifters as I am not trying to push anything crazy with this block. The reason I think my lifters are having issues is my valve train tick I’ve been hunting down.

Greenwood - I have one ready to go, just haven’t had the time to get it installed. I was thinking that I should in theory be able to keep it cool with fans. I’ll be doing some updates soon to this thing. Swapping my other car right now so this one needs to remain in use in case any speed bumps with that.

afishysilvia

07-12-2018, 01:51 PM

Some Glam Shots

https://i.imgur.com/fmCzD6Eh.jpg

https://i.imgur.com/Bg5Sr4Yh.jpg

afishysilvia

07-17-2018, 01:38 PM

Update 7/17/18

Still having some rocker arm noise after the comp cam install, so decided to go aftermarket.

https://i.imgur.com/gNeO7RFh.jpg
https://i.imgur.com/Hb0naush.jpg
https://i.imgur.com/qLLeQGah.jpg

I was thinking maybe with the new comp cam kit the bolts where bottoming out but doesnt appear so.
https://i.imgur.com/Yw2dn27h.jpg

Got around to changing my leaking rear yoke seal on the T56 and putting fresh oil.

Added this little touch
https://i.imgur.com/R24LiWVh.jpg

[240sx]

07-17-2018, 03:55 PM

Added this little touch
https://i.imgur.com/R24LiWVh.jpg
... this will end up in the DIW thread.

Sent from my SM-G930P using Tapatalk

afishysilvia

07-17-2018, 03:59 PM

;6287711']... this will end up in the DIW thread.

Sent from my SM-G930P using Tapatalk

I am fine with that, thanks for the heads up though.

afishysilvia

07-25-2018, 03:35 PM

Update 7/25/18

As I await for the parts for the motor, I decided it was time to get the wing test fitted. It will be in for paint this weekend along with the vent.

https://i.imgur.com/odvLIAoh.jpg

For next week:
1. Paint and install hood vent
2. Paint and install wing

afishysilvia

08-06-2018, 02:52 PM

Update 8/6/18

Was able to get around to removing the hood for vent.

https://i.imgur.com/USZ9zojh.jpg

Got the scoop temporarily mounted, will rivit it soon. New rockers will be here this week.

https://i.imgur.com/YkQuquTh.jpg

Also installed the rear window shade, will get photos of that up soon.

afishysilvia

08-13-2018, 12:48 PM

Update 8/13/18

After a long issue with one of the companies I got some motor work done with(Gonna post something on this separately to warn everyone), the car is up and moving again.

Got Ganadors, vent, the awesome rear window shade, and the snow shovel mounted finally.

https://i.imgur.com/yxEMtIUh.jpg

https://i.imgur.com/HHBbOnZh.jpg

https://i.imgur.com/5dkLnFDh.jpg

https://i.imgur.com/96gUAsoh.jpg

Now that the new vent is on I am hoping that the temperatures will cool down some. The next few days I will be driving it regularly and testing. Finally happy with the overall look. More items will be arriving soon.

[240sx]

08-28-2018, 03:25 PM

https://i.imgur.com/wA1rh1Lh.jpg
I knew I recognized the back drop... pass/ed by there almost every day (F**k that street light) to catch the N.B on ramp. :coolugh:

afishysilvia

08-28-2018, 03:26 PM

;6294334']I knew I recognized the back drop... pass/ed by there almost every day (F**k that street light) to catch the N.B on ramp. :coolugh:

Haha yea man its a popular side street, people haul ass all the time right here going to the train tracks. Still in the process of updating this thing, tune should be next. Acquiring more parts to gain better fitment and clean up the engine bay.

Ask92

08-31-2018, 01:27 PM

Nice build. Where in CA are you?

afishysilvia

10-01-2018, 01:20 PM

Update 10/1/18

Got around to relocating the battery in the trunk

https://i.imgur.com/ENVWoK3l.jpg

Added my switch for the additional fan (potentially A/C fan when that happens)

https://i.imgur.com/eMrANp1l.jpg

Had some problems with the exhaust kit, just not happy with how low it sat and was scraping everywhere. I am not very low nor do I plan to be crazy low so just getting it above or just half inch past frame is good. After hours of tweaking the setup finally got it where I wanted.

https://i.imgur.com/DelAWwfl.jpg

Finally installed the LRB Speed cooling panel and cut out the oil filter/plug access panel. Unfortunately for me where I mounted my remote filter I had to cut off their branding "LRB."

https://i.imgur.com/s5x7KxZl.jpg

Next update will be the oil cooler and tune as soon as my tuner arrives for Formula Drift.

battery1882

10-02-2018, 11:22 AM

afishysilvia

10-02-2018, 03:28 PM

I'm not sure what kind of driving you do, but I assume it gets driven since it's not a show car. I would highly highly highly recommend at least an accusump, just from seeing ls swapped cars and personal experience. envious of ls7 torque though! great build!

Thanks for the kind words, You’re correct it’s just driven for fun. No drifting or autocross at this time, I want the cooler to add more quantity of fluid and also help keep temperatures down. Seen a few 240’s around Chino Hills lately, even a V8 one that I could'nt get to in time.

afishysilvia

10-08-2018, 01:04 PM

Update 10/8/18

Was able to get the oil cooler, thermostat, and my Fumoto drain valve installed. Love these things, makes oil changes a breeze..

https://i.imgur.com/JxBRwXZh.jpg

https://i.imgur.com/BhackDmh.jpg

I have been exploring many different 3D items lately, this Advan SA3R tool is one of them. Works just as it should and for only $30 instead of $100 to $150 for a used one from Yokohama...if you could find one.

https://i.imgur.com/N6AQ9Z6h.jpg

https://i.imgur.com/8cCDR4vh.jpg

Nissfest 2018, made it out and met some cool people from the show. Even met some of the Zilvians out there, great to meet everyone and thanks for saying hi.

https://i.imgur.com/Pkkwau2h.jpg

https://i.imgur.com/OfwcPebh.jpg

https://i.imgur.com/rJwSTIKh.jpg

https://i.imgur.com/q4uTbKvh.jpg

Guy next to me brought his 1992 Nissan Gloria from AZ, he was showing pretty hard. Great guy and amazing car, was a pleasure seeing this thing.

https://i.imgur.com/M5KATTMh.jpg

https://i.imgur.com/Boxri6Ph.jpg

https://i.imgur.com/PfBbXHuh.jpg

https://i.imgur.com/7INmPTrh.jpg

afishysilvia

10-15-2018, 04:03 PM

Update 10/15/18

Formula Drift was this weekend so my tuner was in town and able to get the car finally tuned.

https://i.imgur.com/q1yM1Srh.jpg

I was hoping to squeeze a little more but he did mention this dyno reads low. Exploring options to make more HP, possibly NOS or forced induction of some sort either supercharger or turbo.

https://i.imgur.com/3nl6dvih.jpg

Doing Z32 rear brake swap soon, along with the rear suspension bushings.

s14gmo

10-15-2018, 05:05 PM

:rawk::rawk:Looking good bro keep up the great work!!

afishysilvia

10-15-2018, 08:35 PM

:rawk::rawk:Looking good bro keep up the great work!!

Thanks man, lets get that Socal S Chassis meet going again. This thing is ready for a drive.

afishysilvia

10-18-2018, 01:25 PM

Update 10/18/2018

Dyno Pull while the car was being tuned.

NHvszdIJ_Oo

Working on getting a better GoPro, the $40 Amazon knock-off has its limitations. Will get more updates soon, so far happy with the results.

Q9GEQxSIoeI

[240sx]

10-18-2018, 01:39 PM

The in car pull was cool. Also, either your seat is loose, or that thing's making some f'n torque!

Better camera & upload more please. Thks

Sent from my SM-G930P using Tapatalk

afishysilvia

10-18-2018, 01:43 PM

;6302181']either your seat is loose, or that thing's making some f'n torque!

Haha funny you say that, I have tried to mess with R32 seats as much as possible, its using all four bolts. Will get more videos soon.

afishysilvia

10-23-2018, 10:39 PM

Update 10/23/18

Rear Z32 brake swap completed with R33 cables.

https://i.imgur.com/s0ySIRyl.jpg

Got help from a buddy to roll the fenders some, ended up bottoming out the rear Tein coils, looking at BC Super lows, Stance, and Feal for upgrades eventually.

https://i.imgur.com/H9lBxiVl.jpg

Finally got my last Defi gauge for oil pressure

https://i.imgur.com/n5bCwbil.jpg?1

Picked this Greddy Gracer lip up from a member here :2f2f:

https://i.imgur.com/rvEH33ll.jpg

EFITTZY

10-24-2018, 10:24 AM

+1 for Gracer lip

afishysilvia

10-24-2018, 10:26 AM

+1 for Gracer lip

Thanks man! will be installing this weekend I hope. Almost a shame, its brand new I'm afraid to scratch it :keke::facepalm:

afishysilvia

10-27-2018, 06:43 PM

Update 10/27/18

Picked up some suspension arms, next will be to install these and ES bushings in the knuckles.

https://i.imgur.com/4kK5e0fl.jpg

afishysilvia

11-27-2018, 09:50 AM

Update 11/27/18

Found some decals online for the SA3R's to make their appearance a little better.

https://i.imgur.com/HiWbfkUl.jpg

Located a used rear bumper in better shape than mine, so finally, it looks somewhat decent again.

https://i.imgur.com/FcIKsjol.jpg

Picked up this Circuit Sports coolant reservoir from a member here.

https://i.imgur.com/rmVm4PDl.jpg

https://i.imgur.com/yWE93Q0l.jpg

Got around to installing my last Defi oil PSI gauge, finally some color/gauge synchrony.

https://i.imgur.com/U0rY6s3l.jpg

Soon to come:

1. Rear suspension arm install
2. Z32 uprights
3. Gracer Lip
4. Chase Bays Tucked Radiator
5. Chase Bays Booster Delete
6. Chase Bays inBay brake lines

gsxeclipsed

11-27-2018, 02:28 PM

I like this build. Can you see those gauges well?

afishysilvia

11-27-2018, 02:36 PM

I like this build. Can you see those gauges well?

Thank you! Yea I feel they work well and are visible, its not glaring in my eyes at night. Defi's are wonderful, wish I would have bought these from the very start.

afishysilvia

12-21-2018, 11:23 PM

Update 12/21/18

Been crazy busy with my new job so haven't had time to down the vehicle and do everything I wanted to. I did get some more parts and have done some so here is the progress...

Navan skirts to go on eventually

https://i.imgur.com/zL5pGbDl.jpg
https://i.imgur.com/Q0gukv2l.jpg
https://i.imgur.com/sZduORwl.jpg

6-Pt AutoPower cage installed

https://i.imgur.com/KaW8JGwl.jpg
https://i.imgur.com/Q9AobUJl.jpg
https://i.imgur.com/27aakstl.jpg

New fuel tank plate and gasket to take care of the leaking through the electrical connections..

https://i.imgur.com/knKlmjll.jpg
https://i.imgur.com/yGQZkgul.jpg

Picked up some slightly used Megan FLCA's that will be going on with the rest of the suspension links I've been hording :facepalm:

https://i.imgur.com/dYykPmul.jpg

I did a thing for the future of where I want my car. This will be way on down the road but I got a good deal and couldn't pass it up. Forever keeping the purist's up at night, I will continue to do what I want to my car.

https://i.imgur.com/x5xA1jml.jpg

Goal is to get the suspension arms on this weekend and then take car for a major needed alignment. Will have more updates very soon, Merry Christmas everyone :rawk:

afishysilvia

02-17-2019, 02:02 PM

Update 2/17/2019

Havent updated this in a while, new job and the holidays have been tough on my schedule. However, I have been doing work every moment I can between all the cars.

Got the Megan FLCA's installed

https://i.imgur.com/J5zHMgzl.jpg
https://i.imgur.com/DFcugi6l.jpg

Rear Suspension Competed as Well

https://i.imgur.com/M8KDppkl.jpg
https://i.imgur.com/kgNYvFHl.jpg
https://i.imgur.com/AHJRXzxl.jpg

Using PBM's 2016+ Drop Knuckles with the Z32 E-Brake Provisions
-Ended up flipping the cables from left to right as well as the backing plates and then slightly modifying the openings for the calipers. Overall I am happy with the drop and added stability of everything.

https://i.imgur.com/XIXvQEYl.jpg
https://i.imgur.com/oez3wz2l.jpg
https://i.imgur.com/7fLMmqyl.jpg

Purchased some GKTech V2 knuckles off here from another member, but then had to order inner and outer tie rods also...

https://i.imgur.com/SPtuj8Gl.jpg

Picked up some used SF bash bars, complete set so those will be going on very soon.

https://i.imgur.com/TXwPzbKl.jpg
https://i.imgur.com/s0gOHocl.jpg

Got the alignment done and redid the tune on the car, finally running perfect. Going to enjoy the car for a little bit before downing it again when summer hits to do the rest of the updates.

Next to come will be installing the bars, ChaseBays tucked radiator and all AN fittings for cooling system.

gsxeclipsed

02-19-2019, 12:01 PM

YES! I have been waiting for this update. I am waiting to hear how you like the SF bash bars

JrDarknes

02-19-2019, 01:50 PM

I just bought those PBM knuckles last week. Glad to have seen this thread to see what you did. Good to see all you have to is swap the backing plates from left to right. Didn't want to cut my dust shield loll.

Suspension is looking nice.

afishysilvia

02-24-2019, 09:37 PM

YES! I have been waiting for this update. I am waiting to hear how you like the SF bash bars

Will do sir, those are next on the list.

I just bought those PBM knuckles last week. Glad to have seen this thread to see what you did. Good to see all you have to is swap the backing plates from left to right. Didn't want to cut my dust shield loll.

Suspension is looking nice.

Yea they didnt have much information on the website on what to do. Make sure you swap the entire assemblies from left to right, including shoes, hardware, and cables. Also grind down the indexing notch where the cables bolt to the trans tunnel. Dont worry once bolted down (I used lock nuts) they dont move at all. Been driving on the setup now for almost 500 miles with no issues.

afishysilvia

02-24-2019, 09:40 PM

Update 2/24/19

Went to the local cars and coffee today, did some driving with a buddy and fellow Zilvian (Togue_drifter).

https://i.imgur.com/5IP71Ybl.jpg
https://i.imgur.com/0oYCVC8l.jpg
https://i.imgur.com/9uBHCJxl.jpg
https://i.imgur.com/siRgweMl.jpg

Getting this ChaseBays tucked radiator and supporting accessories ready for install. Hoping to do this next weekend.

https://i.imgur.com/VBe4eKzl.jpg
https://i.imgur.com/eJPSshZl.jpg
https://i.imgur.com/EPCrBrvl.jpg

afishysilvia

02-24-2019, 09:45 PM

Continued 2/24/19

After the C&C, I decided to make some progress on my clip.

https://i.imgur.com/IpzEKFGl.jpg
https://i.imgur.com/srm4bEQl.jpg
https://i.imgur.com/WY6aL7rl.jpg

All stripped, next process will be removing firewall from clip.

https://i.imgur.com/mYDDNRDl.jpg
https://i.imgur.com/kYKEV6rl.jpg

Dash cleaned up so well, super excited about this conversion once completed.

https://i.imgur.com/pSiIajHl.jpg
https://i.imgur.com/n6fQbaRl.jpg

Super_OK_S13

02-25-2019, 07:54 AM

that clip looks pretty nice!! did they cut out the e-brake bracket for you? mine was cut in the same place and i had to re-use the usdm one since the mount at the bottom of the handle was the same shape as the jdm. it was interesting to see how they manufactured the cars in the factory and only had to make certain parts (firewall,e-brake bracket,inner rocker panel for the gas/trunk lever,ect ect.) for various markets. car looks like its coming along nice! keep up the progress!

-Jimmy

s1421

02-25-2019, 09:41 AM

Suscribed! Like how that LRB panel sits underneath.
If you ever need paint work let me know man.

afishysilvia

05-26-2019, 08:13 PM

Major Update 5/26/19

Sorry things have been hectic for me with my new job, but a lot has changed on the car. I've been hoarding goodies for the car when I get the chance.

Some recent stuff...

https://i.imgur.com/1S7qZRMl.jpg
GKTech Diff Cover

https://i.imgur.com/MYHuSUwl.jpg
S14 JDM Cluster with HUD Unit for when I go RHD

https://i.imgur.com/kYajmahl.png?1
S14 Tomei 3Pt Strut Bar

https://i.imgur.com/myzo4xfl.jpg
Got the itch for boost, so here is a V3 internally oil fed centrifugal super charger. Its currently being rebuilt at Vortech with heritage gears (straight cut, noisy) and getting the SI pulley and volute for more boost. Gonna aim for 550 to 600 on pump gas, well have to see when engine pulls timing then might have to go a blend of race fuel or E85.

https://i.imgur.com/tAIY1tIl.jpg
Mcleod triple disk, will probably only run two for the amount of HP I will be looking to achieve.

https://i.imgur.com/SDyLiU1l.jpg

https://i.imgur.com/FikI02Bl.jpg
Got tired of my RC car antenna, so my buddy at work milled me this adapter to fit a S2000 OEM antenna. Works great still and looks much better.

https://i.imgur.com/PVn0jgzl.jpg
Made it out to a cars and coffee here locally and found another shit gold buddy :2f2f:

afishysilvia

05-26-2019, 08:38 PM

5/26/19 Continued

https://i.imgur.com/9HPEA0Hl.jpg?1
Loved the way these looked on the interior thread so picked these up for my boost and A/F gauge.

https://i.imgur.com/DVLcW4rl.jpg
I only like OEM aero, however saw these AeroWolf ganador visors and couldn't resist.

Shortly after the cars and coffee, summer started to come back to California so I decided it was time to do the ChaseBays radiator setup.

https://i.imgur.com/ABg2FCNl.jpg

https://i.imgur.com/RdkLW0zl.jpg

https://i.imgur.com/UZ6BM8El.jpg
Also removed the OEM battery tray for making a hose for intercooler piping later.

So my first radiator from ChaseBays had an internal leak (bought it second hand new but not installed, lesson learned) so I ended up buying their latest and greatest -20 AN setup with Raceline fans.

https://i.imgur.com/rhSErn2l.jpg

https://i.imgur.com/WW2ri5al.jpg

https://i.imgur.com/AfgawKIl.jpg

https://i.imgur.com/dltA27ml.jpg
CBM -20 AN insert for water pump inlet.

https://i.imgur.com/EyAoIb9l.jpg
Blocked off heater lines.

Purchased a new Weiand intake for a good deal, when I boost it will need it anyways.

https://i.imgur.com/QcAcXBml.jpg

https://i.imgur.com/T8FdAfDl.jpg

https://i.imgur.com/DSaRAvKl.jpg

https://i.imgur.com/vCPMMi1l.jpg

The Tomei S14 bar on the right hits the Z32 master cylinder, so I already had a ChaseBay booster delete and line delete ready to go.

https://i.imgur.com/6mFEgadl.jpg

https://i.imgur.com/PtkVgual.jpg

Got some Aerocatch latches installed, also fitted the StreetFaction bash bar. Really disappointed with how the bar fits with OEM bumper. It required a shit ton of cutting for the bumper. I dont really mind cause the car is a Zenki just temporarily. So it fits as good as it can get for now until the S15 front end goes on.

https://i.imgur.com/gQmVxgYl.jpg

The other day my brake lights were staying on, found the stop for the brake switch to be the culprit. Love OEM goodies when I can get them...

https://i.imgur.com/5pVaq9nl.jpg

More goodies for the supercharger...

https://i.imgur.com/ZOyjQOEl.jpg
Vortech BOV

https://i.imgur.com/sjlVZ8tl.jpg?1
Supercharger bracket

After brake lines removed, brakes bled, radiator hoses made here is the current engine shot.

https://i.imgur.com/8Hq9d0hl.jpg

Current shots of car...

https://i.imgur.com/0BcANMYl.jpg

https://i.imgur.com/zKz6ENUl.jpg

https://i.imgur.com/3ZCt7dzl.jpg

https://i.imgur.com/GzAB93Ml.jpg
Little something I've been working on with my stickers :naughty:

My buddy Erik has been killing the body work on the Altezza, and came through once again with the plate delete on the S15 bumper. Super excited to get the front end change going.

https://i.imgur.com/EzpU0Ykl.jpg?1

More updates will be coming soon, once supercharger gets back ill begin the mock up and seeing how to fit the piping.

afishysilvia

06-08-2019, 10:08 PM

6/8/19 Update

Vortech sent back the supercharger with all the upgrades. Got it mounted to my LSSimple bracket.

https://i.imgur.com/oWoSYIjl.jpg

https://i.imgur.com/gwuqzTMl.jpg

Got a ChaseBay LS harness assembly that will be going in when I do the RHD switch.

https://i.imgur.com/FrDueW6l.jpg

In the downtime for the supercharger install, gonna drop the rear subframe and do the bushings. Also will be installing a Q45 diff 3:54 gears and 32 spline CV shafts.

https://i.imgur.com/75APZeAl.jpg

https://i.imgur.com/yA8vR0Xl.jpg

https://i.imgur.com/TPL9KAOl.jpg

Will have more updates on this within the next few weeks, I am trying to get the Altezza ready for Spocom. :naughtyd:

Break Beat

06-09-2019, 03:36 PM

5/26/19 Continued

https://i.imgur.com/9HPEA0Hl.jpg?1
Loved the way these looked on the interior thread so picked these up for my boost and A/F gauge.

Thank you for your support :rawk:
I'm looking forward to see that hud in action. Keep up the good work!

afishysilvia

06-09-2019, 04:42 PM

Thank you for your support :rawk:
I'm looking forward to see that hud in action. Keep up the good work!

Thanks man, love the pods. I will be getting them ready to install very soon.

afishysilvia

08-04-2019, 10:46 PM

Update 8/3/19

Sorry for the lack of progress, the Altezza was pushed forward to get ready for Spocom so the 240 hasn't seen as much attention, but none the less time for updates.

Upgraded my rear end to 3:54 gears from a Q45 diff with GKTech cover, and the additional support of the 32 spline axles and hubs for the increased horsepower. Also had the machinist at work drill the input flange on the Q45 to match the S14 propshaft.

https://i.imgur.com/iwyG6BLl.jpg

https://i.imgur.com/pwMpN4ql.jpg

https://i.imgur.com/i5luU9jl.jpg

https://i.imgur.com/fw4GE5tl.jpg

Took my spare front crossmember and had a friend cut and reinforce it for when I move the motor back with the V8SChassis mounts.

https://i.imgur.com/1IGBhDxl.jpg?1

https://i.imgur.com/g5dYHuDl.jpg

https://i.imgur.com/5we4rXMl.jpg?1

Ive been wanting to change my rear subframe bushings for the longest, its something I should have down when I first bought the car but just put it off.

https://i.imgur.com/3C5VIHvl.jpg?1

https://i.imgur.com/WTtZ81vl.jpg

https://i.imgur.com/t73tWN8l.jpg

https://i.imgur.com/JKcCRe0l.jpg

https://i.imgur.com/FKAOXgTl.jpg?1

Got the supercharger finally bolted securely on the car and installed some new P2M hood shocks.

https://i.imgur.com/dV4I2y9l.jpg

https://i.imgur.com/1WJj5aAl.jpg

Updates to come:

-McLeod triple disc clutch with Tilton throwout bearing
-Install new engine mounts with modified subframe
-Fab up intercooler piping
-Move engine fuse box inside cabin
-Install new coilovers
-Install rear StreetFaction bash bar

Will have more progress soon next weekend.

afishysilvia

11-06-2019, 02:57 PM

Update 11/4/19

Major updates as I have been so busy with the Altezza I have forgotten to post on here.

Since the last update, the direction of the car took a huge step forward in the direction I wanted but did not think that I would be able to do yet thanks to my boy JP.

https://i.imgur.com/aPOR9pql.jpg

Finally got around to getting the firewall removed for the body shop

Decided to go forth with the RHD/S15/Supercharger install in one shot including new full paint job. So here comes the strippers...

https://i.imgur.com/O8j6Nkwl.jpg

https://i.imgur.com/NZ8X2qdl.jpg

Random Weiner appearance, helping me get shit done.

https://i.imgur.com/UOQdjCIl.jpg?1

After that day I decided to rebuild the RHD rack while it was out of the car.

https://i.imgur.com/r2zMllpl.jpg?1

https://i.imgur.com/ekrx7cvl.jpg?1

Rebuilt and painted using Chasebay rack lines and a new dust seal.

https://i.imgur.com/0V3Sfdjl.jpg

https://i.imgur.com/ohdSY7al.jpg?1

Next weekend was engine removal and further stripping...

https://i.imgur.com/q5mk8ngl.jpg

https://i.imgur.com/2Opdn7vl.jpg

Not much left, still in the process of removing all the zenki garbage and lhd wiring.

https://i.imgur.com/Y4k8xOWl.jpg

Got the RHD rack in and the modified crossmember.

https://i.imgur.com/fXO4iTrl.jpg

afishysilvia

11-06-2019, 02:58 PM

Next will be removing the remainder of parts and wiring, window removal then its off to the chop shop. Will have more updates soon!

afishysilvia

11-06-2019, 03:03 PM

Update 11/6/19

Happy to have the ability to finally make this post...

https://i.imgur.com/Up4w1xll.jpg

https://i.imgur.com/eOW7Sxil.jpg

https://i.imgur.com/oaM4lFXl.jpg

100% OEM....no reps or aero here

srh666

11-06-2019, 04:11 PM

whoa hold on, this is really wrong.

I like it!

afishysilvia

11-06-2019, 04:30 PM

whoa hold on, this is really wrong.

I like it!

Thanks man, it’s definitely not for everyone.

S14rebuild

11-06-2019, 05:47 PM

Lookn sweet! Always wanted to go rhd, never had the balls to attempt it

DJTTon

11-06-2019, 07:04 PM

I like where this is going,

Mind sharing some info on how you rebuilt the rack? Did you use a guide? Got part #s for the rebuild kit?

keep it up!

da_crew10

11-07-2019, 07:01 AM

Wow this build has taken it up a notch. I like the s15 front end route you're taking. Any aftermarket aero in the future?

p.s do not put that hood vent on the s15 hood please.

afishysilvia

11-07-2019, 08:00 AM

Lookn sweet! Always wanted to go rhd, never had the balls to attempt it

Thanks man, parts were not that expensive so figured why not.

I like where this is going,

Mind sharing some info on how you rebuilt the rack? Did you use a guide? Got part #s for the rebuild kit?

keep it up!

Honestly it’s pretty straight forward man, follow the FSM use good grease and set the preload. Other than that it’s just seals and o rings. I used Gates #348675.
I’m rebuilding another for a buddy of mine I can take more photos if you’d like.

Wow this build has taken it up a notch. I like the s15 front end route you're taking. Any aftermarket aero in the future?

p.s do not put that hood vent on the s15 hood please.

Thanks, not sure on the aftermarket aero. I’m not a fan of it or widebody(atleast bolted on/rocket bunny/pandem garbage) so I want to utilize factory body lines of the s14 over the s15 fenders. Staying 100% oem metal on fenders and factory plastics.

That hood vent was horrible, I couldn’t keep the car cool with my old setup. The route is not to put any vent, at this point I would rather cut the front tubs out if I really had too. I think that the Chasebay setup now is gonna be fine, but we’ll see when the intercooler is placed in front of the radiator. I want this to remain a streetable car and retain some of the OEM structure like factory core support rather than just tuning the whole thing.

So again...I know I fucking hated how loud the scoop was, but it helped.

s1421

11-08-2019, 07:27 PM

This car is going to be one hella nice when its done!

Super_OK_S13

11-09-2019, 03:37 PM

-kenny-

11-09-2019, 11:12 PM

Great build

afishysilvia

11-10-2019, 11:34 AM

This car is going to be one hella nice when its done!

Thanks to you bro!

afishysilvia

11-10-2019, 11:38 AM

This is one of the builds i am excited for!! Curious to see how the RHD swap goes! There's a guy out my way that converted his (Look up "Glowshift") s14 back to LHD. The car is LS swapped. i think there was clearance issues of some sort if i remember correct, that was in 2015/16

Thanks man, yours is coming along so nicely I gotta keep up with the bar! I have seen that one before, it’s nuts. There’s a lot of stuff that is more kind to the LHD platform on the LS but nothing out of reach. I’ll be using Sikky RHD headers that just came out so excited about that, in combination with a MSD shorty starter. I’ll have more updates real soon, just purchased materials to get the ball rolling body wise.

Great build

Thanks man, appreciate the kind words.

k00laid83

11-13-2019, 09:09 AM

Have you done the RHD wiring yet? I pm'd you on what I did for turn signal wiring when I converted my s13 like 10 years ago. It's super easy and there's no need to extend any turn signal plug wiring.

afishysilvia

11-17-2019, 10:08 AM

Have you done the RHD wiring yet? I pm'd you on what I did for turn signal wiring when I converted my s13 like 10 years ago. It's super easy and there's no need to extend any turn signal plug wiring.

Raul,

Thanks for the assistance so far, will be using this in the very near future.

afishysilvia

11-17-2019, 10:23 AM

Update 11/17/19

Lots of progress to show on this turd finally.

Full deconstruction mode started...

https://i.imgur.com/IF7aSXdl.jpg

https://i.imgur.com/I8RRTm3l.jpg

https://i.imgur.com/P4rV1N6l.jpg

Alas...the car is finally on its way to my boy JP for the goods to start happening.

https://i.imgur.com/UCS88YUl.jpg

https://i.imgur.com/eADRnfwl.jpg

Hes already started getting some of the body parts cleaned up...

https://i.imgur.com/SaW2qDPl.jpg

https://i.imgur.com/wHFp15r.jpg?1

While the 240 is with JP, the Altezza will be getting some much overdue love. Maybe ill toss a photo of it every now and then in here. Just got these Ganadors wrapped to match. Maybe its cliche but I just love the way Ganadors look over any other aftermarket mirrors.

https://i.imgur.com/yqzTNrLl.jpg

Krusty_s13

11-17-2019, 11:10 AM

GANADOR FOREVER!

Excited for the progress dude! It's going to be gooood.

afishysilvia

11-25-2019, 02:52 PM

Update 11/25/19

Glass is out...finally time for the fun! Cant wait to show you guys more!

https://i.imgur.com/s143zOSl.jpg

https://i.imgur.com/bwqBRtGl.jpg

Also got the Altezza V2 look done, saucy.

https://i.imgur.com/oZ8tl4ml.jpg

srh666

11-25-2019, 03:00 PM

you like advan ver.2 wheels?

afishysilvia

11-25-2019, 03:21 PM

you like advan ver.2 wheels?

Depends, on the 3 spoke I prefer forged 1 piece over the 2/3 piece. The S14 will be getting some new johnnies very soon! More to come on those, keeping it quiet for now.

afishysilvia

11-30-2019, 05:50 PM

Update 11/30/19

https://i.imgur.com/RtGyYyIl.jpg

RHD firewall trimmed to whats needed. More updates from my boy JP at J&V Auto body here in socal! Cant wait to get started on this thing!

https://i.imgur.com/FhbWf1Tl.jpg

https://i.imgur.com/FsM7re0l.jpg

https://i.imgur.com/DSvBOA0l.jpg

Getting sooooo good.

Altezza update....

https://i.imgur.com/eju2T7pl.jpg?1

Got the 165mm pulley..shooting for 200hp haha.

Super_OK_S13

12-01-2019, 04:36 AM

afishysilvia

12-01-2019, 10:32 AM

welp, thats the point of no return cut right there! gonna be awesome when finished for sure! i'm sure you have plans to re-paint the bay, but what about the the body, even though "its not a show car"? haha.

Lol yea man! When I saw it a tear shed honestly lol. The “relax, irs not a show car” simply implied I have plans to drive it. I am not cutting corners but I wanna enjoy the car and not solely for shows. It’s getting the S15 front face lift, tons of JDM S14 interior goodies like full green light package, S14 HUD, and other stuff. Full engine bay paint, interior paint, outer paint with new moldings and what have you. Oh and finish supercharging the LS. Going RHD brings some adversities to the LS platform.

However...thank you Black Friday, full Sikky kit will be here this week!

DJTTon

12-02-2019, 07:04 AM

Howre you sourcing the door mouldings and other mouldings for the S14?

afishysilvia

12-02-2019, 07:36 AM

Howre you sourcing the door mouldings and other mouldings for the S14?

Nissanparts on Instagram has most of the moldings. They go in/out of stock a lot, I purchased a while back and have been stock piling knowing I’ll need it later.

afishysilvia

12-08-2019, 12:55 PM

Update 12/8/19

Removed the sound deadening with dry ice yesterday.

https://i.imgur.com/22FXK72l.jpg

Car is getting inside and bay sanded down for paint and the new sheet metal.

https://i.imgur.com/WRgR8HOl.jpg

Test fitting the new OEM S15 core support.

https://i.imgur.com/n15uRSll.jpg

https://i.imgur.com/Ry9dfCul.jpg

https://i.imgur.com/CViLofcl.jpg

Super_OK_S13

12-08-2019, 02:13 PM

pm'd about the bracket!! still excited to see this come to life!!

afishysilvia

12-30-2019, 12:46 PM

Update 12/30/19

So much good stuff so far, firewall is tack welded in just touching up final fitment.

https://i.imgur.com/L1CTjtbl.jpg

Same for core support and hood fitment. I was not aware the differences in the S15 and S14 hood hinges, I tried to space it up but decided to buy the correct hinges so now I have to wait. For now heres some more fun stuff...

https://i.imgur.com/nL0WhQZl.jpg

https://i.imgur.com/PHG36JEl.jpg

Also some fun with the Altezza, hit a local cars and kegs event at a brewery in Anaheim.

https://i.imgur.com/rmfbcA9l.jpg

Gonna slap this new one on and then a retune!

https://i.imgur.com/UmEM1QLl.jpg

Stay tuned.

S14rebuild

12-30-2019, 01:42 PM

Stop teasing lol

afishysilvia

12-31-2019, 04:47 PM

Update 12/31/19

Hope everyones New Year's is kicking off strong. Heres the pick up today, thank you Crimson.

2020 coming up strong.

https://i.imgur.com/lVlIMlWl.jpg
https://i.imgur.com/58GnFSzl.jpg
https://i.imgur.com/KfMC93jl.jpg
https://i.imgur.com/FP59aBbl.jpg

[240sx]

12-31-2019, 05:48 PM

Update 12/31/19
2020 coming up strong.
[emoji54]Hell yeah. Dope wheels. 17/18 stagger gonna be interesting.

Sent from my SM-G970U using Tapatalk

afishysilvia

01-01-2020, 10:18 AM

;6367638'][emoji54]Hell yeah. Dope wheels. 17/18 stagger gonna be Interesting.

Yea man should fit perfect, I’m staying 100% oem body parts with factory metals.

No aftermarket aero here, just not my style in these cars.

afishysilvia

01-04-2020, 03:16 PM

Update 1/4/2020

Happy New Years Everyone!

The car is finally back home!!!!!! So awesome to see the RHD firewall completed and the S15 core support. My buddy JP at J&V Auto Body absolutely killed it! I couldn't be happier with it and it's not even painted yet.

https://i.imgur.com/TWQwtQIl.jpg?1

https://i.imgur.com/YBuCIv5l.jpg

https://i.imgur.com/gaZVGmXl.jpg

Now it's time to install the motor on the Sikky mounts, put the super charger on and the other random odds and bits to get it ready for the fab work. Still waiting on some parts to arrive from New Zealand and Russia for the remainder of sheet metal pieces.

afishysilvia

01-08-2020, 11:59 AM

Update 1/8/20

Nothing new on the chassis yet, however parts to make this as clean and oem as possible keep showing up.

https://i.imgur.com/UtX0olAl.jpg

The Altezza has been keeping me busy, the new S/C setup was engineered for a VW bug so the alignment of the belts is off. Have to modify the custom hub.

https://i.imgur.com/UECNR6El.jpg

Cut the outer housing off the snout for the S/C since now going to a fixed pulley setup. Waiting for my machinist to give me back the hub that will be moved inward.

https://i.imgur.com/EBiivyTl.jpg

Lavish

01-08-2020, 12:17 PM

This going to be a s14.5?

Sent from my iPhone using Tapatalk

afishysilvia

01-08-2020, 12:37 PM

This going to be a s14.5?

Sent from my iPhone using Tapatalk

Yep, but full metal conversion. The thought of fiberglass makes me itch...

afishysilvia

01-16-2020, 04:26 PM

Update 1/16/20

Received the last pieces of the RHD metal that I needed to make this as OEM as possible. My buddy from NZ mailed me the RHD dash bar and RHD E-brake lever mount for the trans tunnel.

https://i.imgur.com/DBDZ2RFl.jpg

Drilled the spot welds out of the bracket and removed the bracket from the cut section he mailed me. Also sanded down the dash bar as it was rusty probably from its time in a junkyard. Primed it with rust protector and then some black paint. Should have some progress on this thing over the weekend.

https://i.imgur.com/SLz57d5l.jpg
https://i.imgur.com/1Z6Yb5Hl.jpg
https://i.imgur.com/48m36Rfl.jpg

Altezza Update (if anyone is even following this part haha)

Got the new S/C on the car, took some modifications of the pulley for belt alignment but its working great. Dyno is this weekend, I also decided to replace all the ignition coils with OEM goodness. Installed an IS300 Koyo radiator in with no issues, just some new holes on the radiator mounting straps up top. Aiming for over 200BHP.

https://i.imgur.com/qdr9w0rl.jpg
https://i.imgur.com/BaPdevAl.jpg

afishysilvia

01-30-2020, 08:21 AM

Update 1/29/20

Got the RHD dash bar painted finally and was able to test fit.

https://i.imgur.com/jbZ5y5dl.jpg

https://i.imgur.com/pwNqCIjl.jpg

OEM RHD E-Brake bracket

https://i.imgur.com/AiwuGEml.jpg

New S15 bumper retainer going to use along with my SF bash bar to make the retainer still functional.

https://i.imgur.com/B6UqjD5l.jpg

Test fitted the Chasebay tucked rad, going to wait till motor is in on the Sikky mounts before I cut to ensure I know how far in is needed.

https://i.imgur.com/4SQvZIhl.jpg

Slapped on the new Quiktime Bellhousing to make those clutch changes far easier.

https://i.imgur.com/JfEMcf2l.jpg

Unfortunately this is how the car sits currently, plan to get back on it very soon.

https://i.imgur.com/CULP1S5l.jpg

New steps are:
-Motor/trans mated just for mockup and then installed into chassis.
-Install intercooler
-Install Supercharger

Then off to fab work for piping and other odd bits and ends.

afishysilvia

02-05-2020, 10:06 PM

Update 2/5/20

So back to the "cheapest swap to do" :picardfp:

Cut the core support to make it removable for future use, will be using rivnuts and welding some tabs on the cut portion to make sure I can secure it down correctly.

https://i.imgur.com/vwER7P1l.jpg

Money Shot :snoop:

https://i.imgur.com/hkFmn6Il.jpg

Gotta finish the bag install on the Altezza, then I am going to drop the Sikky oil pan on and mount it in the car for fab work. Should be in for paint very soon!

s13 @ fullboost

02-05-2020, 11:33 PM

Yo this dope! I like the removable core support idea. Clean work no doubt. Looking forward to more progress.

afishysilvia

02-06-2020, 07:41 AM

Yo this dope! I like the removable core support idea. Clean work no doubt. Looking forward to more progress.

Thanks man, finally over being sick so I should have some good updates soon. I need to get this to fab work ASAP so I can get it back to my buddy JP for paint.

S14rebuild

02-06-2020, 08:30 AM

Saw ur post n said woot, UPDATES......clicked n i cried lol excited to see progress on this build

afishysilvia

02-06-2020, 08:51 AM

Saw ur post n said woot, UPDATES......clicked n i cried lol excited to see progress on this build

Lol my fault man. Had to post the pic just to show all my shit parts and how cheap my build is bro. I’m gonna be tinkering again this weekend on the s14.

s1421

02-06-2020, 10:01 AM

Lol my fault man. Had to post the pic just to show all my shit parts and how cheap my build is bro. I’m gonna be tinkering again this weekend on the s14.

All I see is $ on this build! I remember when my car was like that. almost there though!

afishysilvia

02-23-2020, 12:07 PM

Update 2/23/20!

Major progress :naughtyd:

Old pan was removed, cleaned out all the bolt holes with a bottom tap and prepped the bottom of the motor for the Sikky goodness.

https://i.imgur.com/VQ9Xq3Yl.jpg

https://i.imgur.com/hR8GKIJl.jpg

https://i.imgur.com/MY8dGqml.jpg

https://i.imgur.com/dWcKaxUl.jpg

https://i.imgur.com/Sxhu6p1l.jpg

After some curse words and a bunch of up/down movements the motor is finally in. That Vortech V3 is sitting so pretty back in the bay though.

https://i.imgur.com/Nj3DWygl.jpg

https://i.imgur.com/TNoVkgbl.jpg

https://i.imgur.com/PmVeiIUl.jpg

Just have to do a few more touches and it's finally off to fabwork. Getting stoked to see this thing finally come to life. Soon once its painted I will start retrofitting the HUD to the S14 dash and trying to start figuring out the wiring.

S14rebuild

02-23-2020, 01:59 PM

Its about god dam time for an update.... goooddd shittzzzz

afishysilvia

02-24-2020, 07:48 AM

Its about god dam time for an update.... goooddd shittzzzz

Thanks man. It’s finally coming together just have so many things to do and never have enough time. Will be installing a few more random bits but otherwise it’s ready for the fab work.

afishysilvia

02-28-2020, 08:42 AM

Update 2/28/20

https://i.imgur.com/dptbTJNl.jpg

RHD ignition cylinder rekeyed to match my car.

https://i.imgur.com/sUrCKFJl.jpg

Core support on for mock up, front bash bar on, intercooler mounted for mock up.

https://i.imgur.com/bfclrEQl.jpg

https://i.imgur.com/p7SebMyl.jpg

https://i.imgur.com/ZmPDFFgl.jpg

Little S15 mockup.

Super happy with the status of the car, got the mount kit all sorted with Sikky. Honestly just trying to get the odds and ends on the car before next weeks fabrication visit.

Have to buy oval exhaust materials and then get the car over to my buddy for full exhaust. I should have some more solid update on this guy very soon!

97nismo

03-02-2020, 05:55 AM

This is gonna be nice

What are you doing with the fenders and the body lines?

afishysilvia

03-02-2020, 07:16 AM

This is gonna be nice

What are you doing with the fenders and the body lines?

Thanks man!

In regards to the S15 front, we’re gonna graft a S14 fender and S15 fender to keep the body line of the S14 while also removing some items. Honestly the goal is no fiberglass! Can’t stand how wavy and shit aftermarket kits looks. In regards to body styling oem will always reign over aero.

S14rebuild

03-02-2020, 07:58 AM

Thanks man!

In regards to the S15 front, we’re gonna graft a S14 fender and S15 fender to keep the body line of the S14 while also removing some items. Honestly the goal is no fiberglass! Can’t stay how wavy and shit aftermarket kits looks. In regards to body styling oem will always reign over aero.

Thats the right way todo it. Gonna be sweet.

What color u going with in the bay?

AndrewS13

03-09-2020, 07:44 PM

Following along. This build is so wrong it's right. Huge props for making a car for you and not caring what anyone else thinks.

afishysilvia

03-09-2020, 08:01 PM

Thats the right way todo it. Gonna be sweet.

What color u going with in the bay?

Thanks man, gonna go with a grey engine bay/interior.

Following along. This build is so wrong it's right. Huge props for making a car for you and not caring what anyone else thinks.

Hey thanks man, appreciate the kind words. Yea life’s too short to care what everyone thinks on the internet, especially about a car. Just got the final pieces of the exhaust in, gonna go over this week and put headers on and get it ready for transport. The rain is hindering my plans, I have so much exposed metal I’m afraid to tow it during rain. Either way I’ll have more photos by Wednesday.

afishysilvia

03-10-2020, 11:25 PM

Update 3/10/20

All of the exhaust/intercooler components have arrived finally.

https://i.imgur.com/lWqlaGKl.jpg

~Exhaust
Sikky RHD Headers 3" Vband
3" to 3.5" Oval Vibrant SS Pipe for Y Pipe
Vibrant Ti 3.5" In/Out Muffler with Titanium Vband

~Intercooler
3" polished tubing
Aluminum Transitions for Supercharger In/Out.

Hope to have the car to fabricator soon, Socal is being hit with a shit ton of rain so I don't want to move the car with so much exposed metal. Plans for tomorrow are getting the headers on, mounting the ignition cylinder so I can lock the column for towing, and capping off all the motor fluid ports.

shaggyjake

03-11-2020, 02:19 AM

you're gonna love that vibrant exhaust note.
i love mine. i'm slightly jealous of that burnt titanium tip....may have to change mine soon.

afishysilvia

03-11-2020, 05:37 PM

you're gonna love that vibrant exhaust note.
i love mine. i'm slightly jealous of that burnt titanium tip....may have to change mine soon.

Thanks man! I listened to a few videos of them on LS swapped vehicles, loved the note from the Titanium. I figured since going all the way this time might as well get the extras haha.

afishysilvia

03-11-2020, 05:44 PM

Update 3/11/20

So much good stuff...

Finally installed the Sikky RHD V2 headers, absolutely love the fitment (although its tight) of header to chassis and also where steering shaft passes through is perfect.

https://i.imgur.com/qxyloiLl.jpg

https://i.imgur.com/pgWBkq9l.jpg

https://i.imgur.com/7RLtaPUl.jpg

https://i.imgur.com/0dh1XBIl.jpg

Got the RHD ignition installed so I can lock the wheels this time for the trailer rides.

https://i.imgur.com/NWHD7SWl.jpg

S15 Hood dropped off by my boy JP at JV Auto body. Threw it on, I am going to have to hike it up or maybe vent the hood due to supercharger outlet location.

https://i.imgur.com/LjglTZEl.jpg

https://i.imgur.com/9Y6EoEAl.jpg

I wont have much to do on this thing other than acquire more parts until its done with fab work. Hopefully that'll happen in the next few weeks.

afishysilvia

03-24-2020, 12:15 PM

Update 3/24/20

Decided to move to the Chase Bays remote PS reservoir setup, this required me to move to the Corvette pump. Pretty straight forward and the pulley is much more appealing visually so bonus.

https://i.imgur.com/wAAO5Tql.jpg

https://i.imgur.com/6Cstezhl.jpg

Loads of relief as the CAR IS FINALLY AT FAB SHOP!!!!

Dropped the car off yesterday at Speed Socal (formally known as Mckinney Motorsports) for I/C piping, exhaust, sheet metal and a few more things.

https://i.imgur.com/x31ptYYl.jpg

While the car is at the shop, I decided to pull out some parts and start trying to figure this S14 HUD shit out. So far I've gone through many threads years ago on here about some info but most photos links are dead.

I have acquired A S14 HUD projector (Kouki I belive) and one Kouki HUD cluster and one Zenki HUD cluster. The Zenki cluster is more complete in my eyes because it has the module mounted to the back with pigtails. I however don't have the subharness that goes between and sourcing one I'm sure will be almost impossible. I'm gonna start going through the JDM manuals to try and find anything.

https://i.imgur.com/Rd8cqTkl.jpg

https://i.imgur.com/r8eIi5Wl.jpg

https://i.imgur.com/yv8eaTPl.jpg

https://i.imgur.com/ENkMgyql.jpg

https://i.imgur.com/8zNHwEql.jpg?1

https://i.imgur.com/SgJti0yl.jpg?1

https://i.imgur.com/mh6dN0nl.jpg?1

Also need some help on this, I do not have the connection/pigtail that plugs into the projector. It's a flat 20 pin style, I am currently going through Nissan tech manual for connectors but no luck yet.

https://i.imgur.com/Et8kW7Ol.jpg

Once the car is back and all painted, can't wait to get the full JDM green lighting package in!

https://i.imgur.com/8HPn8Xwl.jpg

I should be getting the car back Thursday or Friday so I will have some real progress for anyone still following along.

FUCK THIS CORONA VIRUS SHIT.

afishysilvia

03-24-2020, 10:39 PM

3/24/20 Pt. 2

Just got these in tonight from the shop :wackit::wackit::wackit:

https://i.imgur.com/D8eQdETl.jpg

https://i.imgur.com/cBXFpuul.jpg

Agamemnon

03-25-2020, 02:42 PM

Great progress so far.
Can't help you much with the HUD stuff, but i did find the plug housing for the projector.
It's a Yazaki 91 Connector A Type Housing 20P Female #7283-8601-40

afishysilvia

03-25-2020, 04:57 PM

Great progress so far.
Can't help you much with the HUD stuff, but i did find the plug housing for the projector.
It's a Yazaki 91 Connector A Type Housing 20P Female #7283-8601-40

Thanks man!! That does help a lot. I?m now looking to see where else it?s used. Most places that have it in stock want orders of ten or more.

Should have more updates on the car tonight as they are now working on the oval exhaust.

Agamemnon

03-25-2020, 06:32 PM

Thanks man!! That does help a lot. I?m now looking to see where else it?s used. Most places that have it in stock want orders of ten or more.

Should have more updates on the car tonight as they are now working on the oval exhaust.
Another option is to find a Kouki Silvia dash harness. I'm pretty sure that all Koukis were prewired for HUD, but just taped up the unused plugs for unequipped cars. Just checked my Kouki harness and both the projector and cluster plugs were there.

afishysilvia

03-25-2020, 06:35 PM

Another option is to find a Kouki Silvia dash harness. I'm pretty sure that all Koukis were prewired for HUD, but just taped up the unused plugs for unequipped cars. Just checked my Kouki harness and both the projector and cluster plugs were there.

That?s pretty neat, but I assume this would be JDM harnesses only correct?

Agamemnon

03-25-2020, 06:48 PM

That?s pretty neat, but I assume this would be JDM harnesses only correct?
Correct.

Also, I was incorrect. Its Yazaki part #7283-8600.

afishysilvia

03-28-2020, 10:36 PM

Update 3/28/20

Okay so Agamemnon was correct on the factory plugs!!!! I am not sure if the HUD unit for the S14 Kouki is all integrated but it appears so. The two missing connections are on the harness for the cluster and HUD projector.

https://i.imgur.com/iFTikNDl.jpg

https://i.imgur.com/g7rBlUkl.jpg?1

https://i.imgur.com/POd7fN2l.jpg?1

Played around with just the light bulb to get it to display.

https://i.imgur.com/1v40MSml.jpg

Also the new Link ECU showed up with the plug and play adapter from Mark Panic. Absolutely love the Link platform I have it on the Altezza as well. This should pair nicely with my Chase Bays Milspec harness.

https://i.imgur.com/xnN39H6l.jpg

Car should be back from the fab shop this upcoming week, then I can really get moving on the progress towards painting. Looking to paint and do the full s15 fender conversion in June once the body shop is freed up.

Does anyone here have a JDM S14 Kouki combination meter wiring pinout? All the ones off Nicoforum advertise as S14A but show the Zenki cluster (can tell by connector type, number of connections, and the drawing of the clusters and gauge location).

afishysilvia

03-30-2020, 08:41 PM

Update 3/30/20

Updates from Speed Socal.

Intercooler mount and piping is all finished up, Vortech bypass valve is in place on the lower left bumper opening. Removable core support has been affixed, and holes in the chassis and RHD ebrake mount has been welded on.

https://i.imgur.com/lCjjpesl.jpg

https://i.imgur.com/rMt2wdtl.jpg

https://i.imgur.com/wsJeU6Tl.jpg

Exhaust is being finished up at the moment, hopefully I'll get it back it back Wednesday if all goes as planned (<---HAHA.)

Once its back, I will proceed with cutting the core support to fit the Chase Bay radiator setup.

afishysilvia

04-01-2020, 01:39 PM

Update 4/1/20

Car is back from Speed Socal!!!! :drama::drama::drama:
Cant thank Andy enough, they did a great job and went above and beyond for other stuff.

Heres some close ups of the exhaust and the Vibrant muffler and oval piping.

https://i.imgur.com/tZMgCg7l.jpg
https://i.imgur.com/VOEPoIMl.jpg

Heres the engine bay and the piping done.

https://i.imgur.com/LSuQ42Ql.jpg
https://i.imgur.com/0M36c2ol.jpg
https://i.imgur.com/vV9TTeZl.jpg

S15 Lights on for mockup, so happy to be at this point with the car.

https://i.imgur.com/Bn1qZwhl.jpg
https://i.imgur.com/Vq5yQ3xl.jpg

Need to mount Chase Bay radiator setup and grind down S/C bracket for hood clearance. Once that is completed, I'll tear it apart and its off to paint.

afishysilvia

04-07-2020, 07:09 PM

Update 4/7/20

Removed the upper bracket for the super charger mount and removed unneeded material for hood clearance.

https://i.imgur.com/L63tJBNl.jpg?1
https://i.imgur.com/qyEQk9Yl.jpg

Had the day off today so decided to cut the core support and mount the Chase Bays tucked radiator setup.

https://i.imgur.com/G7WfBENl.jpg
https://i.imgur.com/b1Dhlgdl.jpg
https://i.imgur.com/7TdCKw4l.jpg

Nutserts inserted into the upper core support for easy removal, everything installed and radiator mounted and spaced accordingly for headlight clearance.

https://i.imgur.com/wA8J0IIl.jpg
https://i.imgur.com/Ru8KgL8l.jpg
https://i.imgur.com/Ukyksetl.jpg
https://i.imgur.com/yMSGXCUl.jpg
https://i.imgur.com/PThvgJNl.jpg
https://i.imgur.com/hiSBCmjl.jpg

Just waiting on a few parts in the mail for the hood bumpers to get the appropriate hood gap. I am going to have to space the hood up slightly to gain a little more clearance for the hood to super charger area.

I will be doing a few things here and there but now I will start removing engine and trans to start stripping back down for paint.

afishysilvia

04-12-2020, 06:13 PM

Update 4/12/20

FUCK COVID!!!!! Had my mom help me yesterday on the car...love the family bonding time.

Motor is back out, going in for engine bay and interior cabin paint tomorrow morning.

https://i.imgur.com/Lsapc4yl.jpg
https://i.imgur.com/uiQqNJIl.jpg

anthony_240

04-12-2020, 07:45 PM

Looking good man! Can?t wait to see this back on the road! And supercharged this time [emoji1303]
Btw how do you like that snap on ratchet? My snap on guy had been MIA for a few weeks, had I ended up buying a mac one

Sent from my iPhone using Tapatalk

afishysilvia

04-14-2020, 01:05 PM

how do you like that snap on ratchet?

This is one of the best tools I've ever purchased. The one in the photo is the newest 3/8" with about 70ft of torque more than the previous. I own two, should definitely get one.

afishysilvia

04-14-2020, 01:10 PM

Update 4/14/20

Picked up the car and finally dropped off at JV Auto with JP for interior and bay paint.

https://i.imgur.com/D5M6M0Ql.jpg

https://i.imgur.com/yKzxWVil.jpg
https://i.imgur.com/Ww4IhZol.jpg

While JP had the car I decided to weld up the 20AN bung to the PRW high flow water pump.

https://i.imgur.com/HD9Is3jl.jpg
https://i.imgur.com/UdZWV6Al.jpg
https://i.imgur.com/FWavXuml.jpg

FINALLY!!!!!!!! SOME PAINT!!!!!!!!

Nardo Grey for the interior and bay paint, JP did an amazing job as usual.

https://i.imgur.com/ARxkOX8l.jpg
https://i.imgur.com/DCF2zagl.jpg
https://i.imgur.com/tllfXg4l.jpg

https://i.imgur.com/v3jIqtZl.jpg?1

https://i.imgur.com/e4RZZ2wl.jpg
https://i.imgur.com/bzGHwOjl.jpg

Extremely happy to be here at this step. The car will be going back in June for the final body work and S15 grafting on the fenders. Going to install some interior parts and motor back in and get as far as I can on this while I'm waiting for the paint.

IIIXziuR

04-15-2020, 11:53 AM

Shout out to your mom for helping you work on the car. My mom would tell me to go fly a kite if I asked for help.

Very nice color choice on the engine compartment.

afishysilvia

04-17-2020, 11:36 PM

Shout out to your mom for helping you work on the car. My mom would tell me to go fly a kite if I asked for help.

Very nice color choice on the engine compartment.

LOL!!! Yea she likes to come see whats going on sometimes, which ends up being "hey, can you grab that"? haha.

afishysilvia

04-17-2020, 11:44 PM

Update 4/17/20

JP has been busy getting the hood painted and the rest of the body panels prepped for paint.

https://i.imgur.com/M1h41KJl.jpg

https://i.imgur.com/W2C0RnIl.jpg
https://i.imgur.com/tspyBqhl.jpg

Picked up some Illumaesthetic LED kouki tails from a buddy of mine.

https://i.imgur.com/2cgjj57l.jpg
https://i.imgur.com/N4EbOd5l.jpg

Took the S15 black carpet I bought and vacuum and steam cleaned/shampoo'd the JDM right out of it.

Before

https://i.imgur.com/KbVoayyl.jpg?1

After

https://i.imgur.com/mMk3d6Ol.jpg

Laid out some Fatmat on the front half of the car, put all the HVAC components in and the firewall insulation mat.

https://i.imgur.com/qwFGgZSl.jpg

Brake master and pedal installed, clutch slave and pedal installed along with the throttle cable.

https://i.imgur.com/IHLOcxul.jpg

In the process of setting up the Mcleod clutch and Tilton throwout bearing, should be getting motor and trans back into the car by end of weekend. Then its off to paint on tuesday.

https://i.imgur.com/iq2SP59l.jpg

Progress is moving fast on this thing, excited to get more done and have it back on the road.

afishysilvia

04-19-2020, 12:56 AM

Update 4/18/20

Got some more work done on the car tonight, routed the dash harness and started plugging in the HVAC components.

https://i.imgur.com/BHUrJmPl.jpg

I also did alot of research on the differences between the DEI Gold Vs. Silver. Found out that silver actually has better reflective heat properties that the gold does. The silver also flows much better with my engine bay. I also ran out, so I will need to get more and finish up the areas I want extra in.

https://i.imgur.com/wgu3aOzl.jpg

Had a slight delay with the clutch setup, didnt know I had the single disc set hardware, ordered the twin disc hardware from Mcleod but due to COVID I'm sure I wont see it till end of the week. This means to have the car to paint hopefully by weekend.

afishysilvia

04-24-2020, 10:59 AM

Update 4/23/20

Made a bunch of progress on the car with some time off I took at work.

https://i.imgur.com/vG8IEDQl.jpg

Got the PRW Hi-Flow water pump on, i welded a 20AN fitting to the inlet and put 12AN on the heater hose openings.

https://i.imgur.com/EqF7iGOl.jpg

https://i.imgur.com/1Rfw9eYl.jpg

McLeod twin disc clutch mounted up, Quicktime bellhousing for easier removal and access. Also got the ZL1 3.5 Bar map sensor installed.

https://i.imgur.com/KndPi5Vl.jpg

Once again mom came in for the win and helped me get it back in the car.

https://i.imgur.com/OF68T2Bl.jpg

Got all the bells and whistles on the car in order to get it in for paint. Started playing with the Chase Bays Milspec harness.

https://i.imgur.com/IWp1BTCl.jpg

https://i.imgur.com/DBWyv7Rl.jpg

https://i.imgur.com/TNwjxTzl.jpg

Car is now at JV Auto with JP for exterior paint and final body work!!!!!!!

https://i.imgur.com/AdjAlPpl.jpg

Have a few issues to sort with the LS engine and RHD. One being the clutch master cylinder is extremely close to the RH head. I cant use the wilwood I had while LHD. I'm working with just over 2" of room. Right now the Chase Bays solution is still too far forward, Sikky has a solution in the works but no ETA and I have another route that I might look into for now. Ill keep this updated on that part incase anyone else runs into it.

I will have photos soon of the S14.5 metal fender conversion, that is next along with body panel alignment.

IIIXziuR

04-24-2020, 02:01 PM

I think mother's day is coming up pretty soon, you better get your mom something nice! Haha

The car is coming along nicely. I'm looking forward to the S14.5 updates!

97nismo

04-26-2020, 04:05 PM

Good progress

Have you driven a RHD car before this conversion?

It will be quite a ride especially with the LS

afishysilvia

04-26-2020, 04:58 PM

I think mother's day is coming up pretty soon, you better get your mom something nice! Haha

The car is coming along nicely. I'm looking forward to the S14.5 updates!

Yea man she's already rubbing it in hard too haha!! Thank you, we're on the fender grafting portion now. The goal is to retain the factory s14 body line and delete the s15 marker light. I'm gonna have an update tonight on this thing.

Good progress

Have you driven a RHD car before this conversion?

It will be quite a ride especially with the LS

Yes I have an Altezza that I drive about 2 days a week (or whenever I can really) so I won't say I'm an expert but very comfortable doing so. The power and handling of the 240 is way different than my sedan of course so it will take some adjusting.

afishysilvia

04-27-2020, 11:01 AM

Update 4/27/20

The car is at the body shop getting the metal fender conversion done at the moment. Sort of resembles a frankenstein...

https://i.imgur.com/79VygcBl.jpg

https://i.imgur.com/hbK974yl.jpg

https://i.imgur.com/HDzxSLfl.jpg

Absolutely loving the front end look.

I cleaned up the RHD wiper motor and sprayed it.

https://i.imgur.com/Co3S723l.jpg

https://i.imgur.com/7du40s3l.jpg

Also moving forward with the tuning the car will be utilizing speed density over MAF so I purchased a thread in IAT sensor. I had the machinist at work whip me up a bung and got it welded into the hot pipe.

https://i.imgur.com/nj3meQCl.jpg

https://i.imgur.com/92dLcgBl.jpg

Spoke to a buddy overseas with a S15 LS2 and got my clutch master issue resolved. He utilized a Volkswagon European model vehicle's master and drilled new holes in the firewall to fit it. One other key feature of how compact the master is the factory remote reservoir which I may just plumb into my brake master. I took apart the Sikky Wilwood adapter plate and popped out the studs. I plan to make new holes when the new clutch master arrives from the UK and then weld the studs in place.

https://i.imgur.com/V8J1QCkl.jpg

https://i.imgur.com/LIA7gozl.jpg

https://i.imgur.com/CYgIh5al.jpg

I hope to have more updates on the fender conversion soon!

97nismo

04-30-2020, 06:52 PM

I was at a car show years ago and saw some fiberglass s14.5 fenders that’s looked fantastic with some work

Any chance to go glass instead of metal?

afishysilvia

04-30-2020, 10:51 PM

Any chance to go glass instead of metal?

Not a chance in hell...:coold:

afishysilvia

05-03-2020, 04:27 PM

Update 5/3/20

Only a few builds I've seen being done during quarantine....:fawk:

https://i.imgur.com/4VSEvM2l.jpg

https://i.imgur.com/Sg9zNdMl.jpg

https://i.imgur.com/9GFvvRKl.jpg

https://i.imgur.com/A7KZi3tl.jpg

JP has been grafting the metal S14.5 fenders, now just time to shape and final prep.

https://i.imgur.com/sSoMkw3l.jpg

Car is at JV Auto as previously mentioned, primer has been laid. Hopefully have some color soon!

https://i.imgur.com/MrogsUNl.jpg

https://i.imgur.com/tv2EbCWl.jpg

https://i.imgur.com/zDKzZS5l.jpg

Cleaned up the RHD engine bay fuse harness and trimmed unneeded circuits, and will lengthen for the tuck.

https://i.imgur.com/PHj7YTWl.jpg

https://i.imgur.com/kNactS5l.jpg

https://i.imgur.com/TQgtrE6l.jpg

New Greddy Airinx 100mm filter.

https://i.imgur.com/WEMbtyPl.jpg

Had to dig some parts out and stumbled upon this NOS Tomei brake master I will install once car is back.

https://i.imgur.com/6So2HSHl.jpg

https://i.imgur.com/CH4HqOVl.jpg

Stumbled accross the media blaster we have at work, decided to use is on my RHD wiper arms that were super rusty and my valve covers that need some modifications.

Left is 1 pass, right is original.

https://i.imgur.com/aNiqHGVl.jpg
2 passes.

https://i.imgur.com/KDY0xvwl.jpg

Had the wiper arms powder coated in a satin black to match OE.

https://i.imgur.com/UD9v3sZl.jpg

Valve cover will need 10AN bung welded on for the catch can setup, but also found this awesome oil filler adapter 10AN fitting for the other side.

https://i.imgur.com/MGmUqdMl.jpg
I will have more photos of the car completed soon, but will not post a color photo of the switch until I have some decent pics of it. Follow along!

IIIXziuR

05-03-2020, 06:56 PM

Nice! Already in primer! Excitebike

97nismo

05-05-2020, 12:57 PM

What is the plan for the hood?

Stock s15 ? Or scooped type?

afishysilvia

05-05-2020, 01:10 PM

Nice! Already in primer! Excitebike

Extremely! I?m trying not to bug my paint guy....lol

What is the plan for the hood?

Stock s15 ? Or scooped type?

Yea man stock s15 hood. I?m not sure you noticed yet but I?m thriving to keep all oem stuff here. As long as engine temps permit me to keep running that hood I will. Even then if not I?d try small ducting or cuts in the hood before a scoop again.

da_crew10

05-05-2020, 09:44 PM

This is going to be awesome once complete.

afishysilvia

05-08-2020, 11:38 AM

5/8/20

JV Auto doing some of his best work...:love::love::love:

Very hard to tell but trust when I say body lines are still there. Here are the S14.5 metal conversion fenders. Beyond excited to be staying all original Nissan metal and plastics.

https://i.imgur.com/bbDzoHCl.jpg

https://i.imgur.com/lpSw2sLl.jpg

I have so many updates parts wise on this but I cant post yet cause of the color reveal. I will have some updated photos soon!

afishysilvia

05-08-2020, 11:39 AM

This is going to be awesome once complete.

Thank you, I am not sure when "complete" will actually be complete. My main goals for this year are to have it put back together from paint wise and running. I have many other interior things and wiring to sort through so that will be the biggest hurdle.

97nismo

05-09-2020, 05:41 AM

I like this

Thoughts about upgrading to the advan version 2 ?

I had yours at one point but found it was a pain to polish the lips

afishysilvia

05-09-2020, 05:14 PM

I like this

Thoughts about upgrading to the advan version 2 ?

I had yours at one point but found it was a pain to polish the lips

Oh yea man, I will forever love these rims and they?re not going anywhere.

With that being said...the car already has a new set of wheels I acquired almost a year ago in spark of this build. Once I get some photos of everything on I?ll post them. The car had been painted!!! Excited to have some new stuff to put on here!

97nismo

05-10-2020, 12:58 PM

Post it !!!

afishysilvia

05-10-2020, 03:53 PM

Post it !!!

I?ll have photos of the rims up tonight :D

afishysilvia

05-10-2020, 06:30 PM

Update 5/10/20

As I stated previously...here they are finally.

LMGT4's :love:

Fronts:
17x9 +22

Rears:
18x10.5 +15

https://i.imgur.com/QZ9oAs8l.jpg
https://i.imgur.com/GSEZgHrl.jpg
https://i.imgur.com/hoWwcQ7l.jpg
https://i.imgur.com/GaUGFLTl.jpg

Car will be getting picked up this upcoming Saturday unless we run into any issues.

97nismo

05-11-2020, 01:41 PM

I love those wheels!!!!!!

IIIXziuR

05-12-2020, 09:08 AM

My man. Delivering the goods. Those are some very handsome wheels

afishysilvia

05-13-2020, 06:51 PM

Major Update!!!! 5/12/2020

Finally, My Vision Is Surfacing. So many things I have to say on this project. It has been such a journey to start. There were so many changes in direction, setbacks, and unseen circumstances that caused this build to take time (Testing my impatience). Thank you to all of those who have helped push me and had their hands on this car.

https://i.imgur.com/ONwAvMbl.jpg

https://i.imgur.com/o56mM9Vl.jpg

https://i.imgur.com/bFq4L6Cl.jpg

https://i.imgur.com/jr2UoqHl.jpg

https://i.imgur.com/MFgY3crl.jpg

Full OEM metal and plastic conversion. JP absolutely killed it. The S14.5 conversion fenders came out exactly as we wanted. The color is spot on from what I chose, so many options and going over it and over it again. The plan now is to start getting the smaller stuff on and interior back in before we have glass. Still have more updates soon!

97nismo

05-13-2020, 07:40 PM

Well done well done

[240sx]

05-13-2020, 08:45 PM

That's a....interesting color choice.[emoji848]

Sent from my SM-G970U using Tapatalk

da_crew10

05-14-2020, 09:44 AM

Love it. Different than most builds currently!

Agamemnon

05-14-2020, 11:19 AM

Body lines look great!

IIIXziuR

05-14-2020, 08:10 PM

Purple Drank!
That is a really cool color choice. Looks quite great.
Love it, man.

cured13

05-14-2020, 08:25 PM

Dark orange calipers will make these wheels pop up even more,
I like this build man!
More pics please!

afishysilvia

05-15-2020, 09:38 AM

Well done well done

Thanks man! It?s finally starting to resemble what?s in my head. I?m gonna have more updates soon on interior work and wiring.

afishysilvia

05-15-2020, 09:44 AM

;6381058']That's a....interesting color choice.

Thought so too when I chose it...

Love it. Different than most builds currently!

Thank you. Once this car is done it will probably make many people angry, but that's the best part.

Body lines look great!

Thanks man, one thing I wanted to keep since almost everyone who does it is lazy and doesn't add them.

Purple Drank!
That is a really cool color choice. Looks quite great.
Love it, man.

Thank you, purple has always been my favorite. Glad it came out as good as the splotch was.

Dark orange calipers will make these wheels pop up even more,
I like this build man!
More pics please!

I had considered orange! I have one more color I'm slapping in there. The badge for the hood still has the red in the "S" so I'm torn on if I should paint that as well.

Got more done last night, will most some photos of progress. Next is wiring and getting the jdm harnesses all happy and communicating.

afishysilvia

05-18-2020, 12:52 PM

Update 5/18/20

I am waiting on some parts to arrive in the mail and my headers to finish ceramic coating with Jet Hot. I did get around to installing the Illumaestetic chasing tails on.

https://i.imgur.com/uUJdJzGl.jpg

https://i.imgur.com/0tgCELGl.jpg

https://i.imgur.com/FiIXMSkl.jpg

Also finished rolling all the FatMat in the car, got inside the wells and roof. I still need to do trunk area but waiting for glass and speakers to be installed.

https://i.imgur.com/k6HYvsVl.jpg

https://i.imgur.com/ewyBUghl.jpg

https://i.imgur.com/IHC5ba8l.jpg

Will have more soon, working on the car tomorrow so maybe i'll be able to get a few more items in. Hardest part of putting the car back together is planning so I don't have to take stuff back off.

RalliartRsX

05-18-2020, 01:23 PM

Dat color is lovely! Great choice!

S14rebuild

05-28-2020, 09:55 AM

Lookn gloriously!!

afishysilvia

06-01-2020, 08:24 PM

Dat color is lovely! Great choice!

Thanks Man!!!:wavey:

Lookn gloriously!!

Appreciate it bro :wavey:

afishysilvia

06-01-2020, 08:30 PM

Update 6/1/2020

Had some left over Fatmat so I figured why not do the doors, I never see anyone who does the doors.

https://i.imgur.com/Zn6dsArl.jpg

Adding in the interior harnesses and created the mounting area for the trunk/gas lever on the RHD side since its not stamped into both sections.

https://i.imgur.com/2AE6WBWl.jpg

Test fitting the plates, I'm going to have to modify the Tomei 3PT strut bar mount slightly but it wont affect the strength or integrity.

https://i.imgur.com/wzEf8F5l.jpg

https://i.imgur.com/sz3nHakl.jpg

All the LS swaps I've mount the fuel filter extremely close or in a hot area so I'm going to modify the Sikky full lines kit and moved the filter under the car near the frame rail (Its loose, just for test fit).

https://i.imgur.com/7fLuNc6l.jpg

Finally got around to trying out the 3M undercoat on my left side fender wells. Started by cleaning it, using a wire wheel and taping off areas. I will finish the right side tomorrow.

https://i.imgur.com/r0GACSml.jpg

https://i.imgur.com/wmliDZ0l.jpg

https://i.imgur.com/I7dvgE8l.jpg

https://i.imgur.com/gIeb9Rnl.jpg

JetHot will have my headers back to me next week, I am going to drop the fuel tank tomorrow and replace all the vent hoses and run the new steel braided lines to the fuel system.

afishysilvia

06-02-2020, 10:46 PM

Update 6/2/20

Got the Sikky long fuel lines ran to the tank. I decided to switch the location of where the filter mounts because of heat soak issues I had when it was mounted in the factory location.

https://i.imgur.com/iTAPT5ol.jpg
https://i.imgur.com/Dr9KtOGl.jpg

Just some glamour shots...

https://i.imgur.com/eEvsvw4l.jpg
https://i.imgur.com/NdB2C0Nl.jpg

Test fitting the carpet after making the mounting hole for the RHD trunk lever, using rivnuts and a dremel.

https://i.imgur.com/z9kFuHYl.jpg
https://i.imgur.com/xLzIjxIl.jpg

Tomorrows plan is getting the driveshaft in, undercoating the right side wheel wells. Connect the brake lines and just some misc stuff. Decided to switch the Street faction bar since its a pain in the ass and their customer service is terrible.

RVAE34

06-03-2020, 08:07 AM

Love it! I am a sucker for purple cars.

IIIXziuR

06-03-2020, 08:10 AM

It is coming together so fast! Good job as always.
The hue of purple is really cool, boss. Nice choice

da_crew10

06-03-2020, 01:20 PM

Keeps getting better and better. Apurale!

afishysilvia

06-06-2020, 05:59 PM

Love it! I am a sucker for purple cars.

Thanks man, appreciate all your kind words.

It is coming together so fast! Good job as always.
The hue of purple is really cool, boss. Nice choice

Appreciate it man!! Gonna have more very soon!

Keeps getting better and better. Apurale!

Thanks man, more very soon!

afishysilvia

06-06-2020, 06:03 PM

Update 6/6/20

Got my pipes polished up by Speed Socal (McKinney Motorsports), they did a great job.

https://i.imgur.com/A5iC9NVl.jpg

Quick test fit on the intake pipe.

https://i.imgur.com/Zx0F3WNl.jpg

https://i.imgur.com/PGFyWknl.jpg

Have to change my entire fuel setup. I went with the Sikky kit -6 but after research and a lot of back and forth I decided to go -8 and use better fuel filters. I am waiting on AN fittings and my new fuel top hat. Going -8 Feed and -6 Return with a Walbaro 525 fuel pump, Radium fuel rails, FPR, and pressure gauge.

https://i.imgur.com/V7dC0AEl.jpg

https://i.imgur.com/Jx4Mj8yl.jpg

Finally time for some more cutting :wtc::wtc::wtc:, test fitting the S14 HUD.

https://i.imgur.com/PUoPw1Wl.jpg

Can only find images off of Google so I hope I can get this right the first time.

https://i.imgur.com/TzaGMnRl.jpg

Going to work on the car again next weekend once more items arrive. Headers are late to arrive from JetHot so that really throws a cramp in my progress.

Agamemnon

06-06-2020, 06:35 PM

Good luck with cutting of the dash.
There's a whole RHD dash with HUD and climate control on YAJ that would eliminate the need for cutting. It's kinda pricey but its factory fit.

afishysilvia

06-06-2020, 07:09 PM

Good luck with cutting of the dash.
There's a whole RHD dash with HUD and climate control on YAJ that would eliminate the need for cutting. It's kinda pricey but its factory fit.

Thanks for that buddy, I finally have photos of what it looks like installed underneath. That's gonna cost more than 10,000 yen to ship he's crazy lol. Also his dash has scratches and marks all over it. I'll take my chances, if I fuck it up then S15 dash is next :drama:

G33kin

06-06-2020, 10:30 PM

Love me some purp!

S14rebuild

06-07-2020, 07:24 AM

Do u need a special windshield for the hud to work? Or u use a film on the glass?

afishysilvia

06-07-2020, 12:14 PM

Love me some purp!

Thank you man appreciate it. :rawk:

Do u need a special windshield for the hud to work? Or u use a film on the glass?

I?m told it will still work, if it?s like my S13 was it will work. I had a broken windshield and got it replaced with a regular one and could still see it.

S14rebuild

06-07-2020, 01:09 PM

Hmmm... thats pretty sweet. Def wanna see the end result. Cars coming along great

Antihero983

06-08-2020, 08:27 AM

Absolutely love this build. Well done.

RalliartRsX

06-08-2020, 09:16 AM

Nice work!

What are you using for shielding of the underside??

afishysilvia

06-08-2020, 09:27 AM

Hmmm... thats pretty sweet. Def wanna see the end result. Cars coming along great

We?ll see man! If it?s not visible enough I?ll have to figure that out. Thank you :)

Absolutely love this build. Well done.

Thank you!! I promise to keep it active and not fall off like most on here :hsdance:

Nice work!

What are you using for shielding of the underside??

Thanks man, we?ll inside is full 5M Fatmat, underneath in the tunnel area and where header/Y pipe is I have DEI 10M Aluminum heat shielding. It was on the chassis before I didn?t have to mess with that part. I?m really excited to see and feel the differences of all the insulation, new clips and moldings and of course the thousands in oem weatherstripping lol.

TheRealSy90

06-08-2020, 02:30 PM

IMO I'd trim the Shakkito plate to clear the Tomei bracket instead of cutting the Tomei bracket.

afishysilvia

06-09-2020, 09:59 AM

IMO I'd trim the Shakkito plate to clear the Tomei bracket instead of cutting the Tomei bracket.

Far easier to recreate that simple bracket than trying to notch the plates and fixing that for future sale (If any...haha).

Parts are all due in by weekend! Hopefully I?ll get fuel system full sorted. Ordered my PHR S14 drop in fuel hat.

afishysilvia

06-11-2020, 03:28 AM

Update 6/11/20
HUD IS IN :wavey::wavey::wavey:

Just using photos, I'm pretty happy with the outcome. So fucking stoked to have this thing in and I'm ready to test it out! Parts are flying in faster than I can put them on.

https://i.imgur.com/VhkV4DBl.jpg

https://i.imgur.com/sWeqcwFl.jpg

https://i.imgur.com/mEJnAkEl.jpg

This weekend I will be installing the fuel system and hopefully get more of the wiring sorted as Jet Hot updated me and said this Monday the headers arrive.

Also got the VW clutch master in from the UK, gonna make the mounting holes and weld the studs in place for it and then I will paint it and get it fitted to the vehicle.

IIIXziuR

06-11-2020, 07:55 PM

That's another victory right there, brotha. Looks good =)

Agamemnon

06-11-2020, 08:48 PM

Dude that's awesome! Can't wait to see it powered up.

afishysilvia

06-12-2020, 03:37 AM

That's another victory right there, brotha. Looks good =)

Appreciate it man, trying to make it as best as possible. Ordered a RHD dash mat as well to help preserve the dash. It had some slight scratches and damage from the importer, the glass was laying over on the dash.

Dude that's awesome! Can't wait to see it powered up.

Yea man me too, I'm curious to figure out what it reads off. I would imagine the VSS but I am not using a Nissan sensor and will need to figure that out when it comes time.

afishysilvia

06-12-2020, 03:45 AM

Update 6/12/20

I received the VW Euro model car (not sure what model honestly) from a buddy in the UK with a LS2 S15. Cant leave shit alone so here we go..

https://i.imgur.com/ajpn44al.jpg

Modified the Sikky Wilwood bracket, popped out the studs and drilled the new holes for the VW master.

https://i.imgur.com/fhQISTNl.jpg

https://i.imgur.com/ESoILl7l.jpg

https://i.imgur.com/2XFCm82l.jpg

Welded the unused holes and studs in the correct location on the bracket and then hit it with the sand blaster.

https://i.imgur.com/WsphlEAl.jpg

Blew the master apart, cleaned it all up and then cut off the ball connection. Threaded the rod for the clevis fork connection on the Nissan pedal.

https://i.imgur.com/oaCiqukl.jpg

Once all completed, I wire wheeled it and painted it. Should be ready for install once my buddy paints the adapter plate the exterior purple.

https://i.imgur.com/ECKR1aql.jpg

https://i.imgur.com/LribO9Cl.jpg

The Radium fuel filters came in, found some rubber coated brackets at work I will be utilizing to mount them with.

https://i.imgur.com/o3j0CeWl.jpg

Trying to keep this build progressing, I got a ton of parts in tonight that I will update this with tomorrow.

Future240

06-12-2020, 02:44 PM

I should ban you for making me go through all these pages of awesome car instead of working:rl::rl::rl:

Seriously though, bang up job. This makes me want actual do some work to my car.

afishysilvia

06-13-2020, 11:48 PM

I should ban you for making me go through all these pages of awesome car instead of working:rl::rl::rl:

Seriously though, bang up job. This makes me want actual do some work to my car.

Thanks a lot Future I appreciate that man. Just trying to make my best vision of my ideal 240. I'm to the point with builds/shows/seeing projects in general that I would rather not know the motor until the end. I feel that people are so quick to drop their interest and not see the level and aspects of a build if it doesn't have a period correct or oem manufacture engine. Anyways enough with my rant..

afishysilvia

06-14-2020, 12:58 AM

Update 6/13/20

Not as a productive day as I wanted but I was able to knock some stuff out. So many things arriving, I'm having to write down what needs to be done in sections so I don't forget.

https://i.imgur.com/vdwIXAXl.jpg

Quick test fit of the VW master, looking flawless and with heaps of clearance from the valve cover. I ordered up the fittings for the banjo connection and will get a -3AN hose to the slave once I have a length needed.

https://i.imgur.com/qeEvWqWl.jpg

Also got the Radium FPR in-rail style mounted.

https://i.imgur.com/kElgoScl.jpg

Speaking of Radium, I did get the fittings for the fuel filters and the brackets needed to mount them. I also went ahead and ordered the Powerhouse Racing S14 fuel tophat with -8AN feed and -6AN return. Once my Walbaro 525 shows up from Summit I'll start that install.

https://i.imgur.com/9MyMdWFl.jpg

Needed some stickers from the recent Nissanparts pack so I decided to go ahead and order all the OEM rubber trunk bumpers. I absolutely love closing all my doors, hood and trunk because of the feel when it latches. Not a single 240 I have previously owned had any of these items replaced, its such a breathe of fresh air ha.

https://i.imgur.com/IzSwKjfl.jpg

https://i.imgur.com/p9QO7s1l.jpg

Greddy Airnix filter mounted and ready to go, need to mount the wheel next to see if it clears.

https://i.imgur.com/Goq9Phel.jpg

Made the rail jumper hose, put slim line caps on the openings on the bottom of the rails and got the Radium pressure gauge on the passenger side rear rail. Starting to connect the Chase Bays milspec LS harness and extend connections using OEM metripak stuff from work :coold:

https://i.imgur.com/IEiJMEnl.jpg

https://i.imgur.com/qatEGnPl.jpg

https://i.imgur.com/POC1VLUl.jpg

ICT Billet coil pack brackets JP blessed with the Nurple Purple, waiting on my valve covers to get back from powder coat.

https://i.imgur.com/E7azskSl.jpg

Searched all over the internet and found some S15 hood props off Amazon from a company called Autobahn. Not a bad price, similar in design to the P2M S14. Either way, they're holding the hood for now.

https://i.imgur.com/eUCBe23l.jpg

Headers are due to arrive Monday from JetHot, I was surprised to see the update in shipping ETA. Once the headers are on then the exhaust obviously, I am going to be itching to start this thing.

The next photo gives me headaches just looking at it, but once I have some time I can start laying out the harnesses and routing them correctly. My Altezza is running a Link PnP kit with a harness jumper made by Panic Wire so I opted to move the LS over to it as well due to how impressive it has been. I have a full uncut cabin harness coming from Russia right now so I can have 100% RHD harnesses in hopes of everything connecting and working with no issues.

https://i.imgur.com/RcpIrBLl.jpg

As I mentioned before I will have more updates as soon as I can. I have to ship back my bash bar and catch can for a modified version for some clearance problems. If my headers come in on Monday I cant lie and say I am not going to sneak over before work one day to get them on and see what it looks like! :naughtyd:

afishysilvia

06-22-2020, 01:42 PM

Update 6/22/20

Alright guys finally made some more progress on Silvette. Got the headers in from Jet Hot and let me just say they came out flawless. I cannot wait to see how well they keep that heat out of my bay.

https://i.imgur.com/f4Z3eDrl.jpg

https://i.imgur.com/T9w5Acdl.jpg

Installed with the purple plug boots and new wires, the combo is looking quite JoKar.....lol

https://i.imgur.com/XTYXq4Ml.jpg

https://i.imgur.com/njRFNsjl.jpg

https://i.imgur.com/RfB3B8Dl.jpg

Received the full RHD saloon harness from my buddy in Russia. Everything plugged right in and layed right where it should so nice.

https://i.imgur.com/O5aoweWl.jpg

Caps finally got powder coated to match the rims, and boy are these a bitch to install.

https://i.imgur.com/pQhIfJhl.png

https://i.imgur.com/W8YVtvtl.jpg

https://i.imgur.com/khsJ2Wjl.jpg

Also got my valve covers and Tomei strut bar parts back from powder coating. Went super chrome on these to help the colors pop.

https://i.imgur.com/v219orfl.jpg?1

https://i.imgur.com/Xri28iel.jpg

Got the ICT painted coil pack cover on one just to see the look, love it came out exactly as planned.

https://i.imgur.com/DtjsX46l.jpg

https://i.imgur.com/SesRncBl.jpg

Decided to be a little extra and get some of that hot boy vulcan heat wrap for my hoes....

https://i.imgur.com/ietODxrl.jpg

Currently how she still sits, I am getting the catch can and new bash bar in next week and dropping off more body parts for paint. Sorting the fuel still and all the hoses and belt routing.

https://i.imgur.com/Cxu2l9ql.jpg

I will continue to keep this thing going, more to come next weekend.

IIIXziuR

06-22-2020, 03:02 PM

Ahhh some nice updates on a Monday. Very good, my dude.
I didn't even know you could get some colors on JetHot stuff!
Loving the colors going on in the bay.

S14rebuild

06-22-2020, 03:48 PM

Fuk this car.......jk luv the attention to detail. Going the same route. Sometimes feel like it takes forever to finish, and waithing 5-7 days for 1 fitting is crazy, but so worth it when its assembled and looks flawless. Huge props for ballerness....the end result will be sooo worth it

dhsil80

06-26-2020, 12:46 PM

Great attention to detail, can't wait to see that HUD what an amazing build!

afishysilvia

06-28-2020, 06:23 PM

Ahhh some nice updates on a Monday. Very good, my dude.
I didn't even know you could get some colors on JetHot stuff!
Loving the colors going on in the bay.

Yea man the chrome and satin are only good for 1300, anything higher they turn color. I expect to be close to that heat range, but why not go for more right? The color came out awesome, I was very worried only looking at a splotch online but they delivered. Hopefully they reduce the heat as good as they look as they definitely made the value of my headers go up haha :duh:.

Fuk this car.......jk luv the attention to detail. Going the same route. Sometimes feel like it takes forever to finish, and waithing 5-7 days for 1 fitting is crazy, but so worth it when its assembled and looks flawless. Huge props for ballerness....the end result will be sooo worth it

Haha thanks man, and yes trust me I know the waiting game. Thankfully I have some good places locally I can always go if absolutely need be. I'm trying my best at this game called patience, as I've always been terrible at it.

Great attention to detail, can't wait to see that HUD what an amazing build!

Thank you sir, appreciate it a lot. I hope you can believe the excitement for me is real on this HUD. I am determined to figure out what to do to get it working.

afishysilvia

06-28-2020, 06:34 PM

Update 6/28/20

Welp guys!!! Finally the catch can and new bash bar are in!!!! Absolutely love the quality of TFF and Andrew is a stand up guy. I will say his products are far better quality than Street Faction and his customer service is exceptional. For that, I will continue to support and push his product, good service and quality is possible people and fuck anyone who tells you otherwise :rl:.

Just playing on that Jo-Kar.....
-10 AN, sight gauge, drain and baffled/vented. The fitment is 100% perfect.

https://i.imgur.com/N6s6SSol.jpg

https://i.imgur.com/WqLBV0Rl.jpg

https://i.imgur.com/fV23mmUl.jpg

Bash bar is straight jack point version for S14/S15.

https://i.imgur.com/dAiAVYEl.jpg

https://i.imgur.com/duNJVyxl.jpg

https://i.imgur.com/Cf9OUOvl.jpg

Decided to finally get my bungholes sorted...

https://i.imgur.com/3HaVhqWl.jpg

https://i.imgur.com/PMGPd7ol.jpg

https://i.imgur.com/ww9fOeTl.jpg

https://i.imgur.com/Z4toYwKl.jpg

After long debate, I decided to change my S14 rear end. Went full JDM with rear valances. Still need to send to paint but picked up a brand new S14 JDM rear bumper locally and my buddy Fitelite got me some minty OEM S14 valances from his side of the pond.

https://i.imgur.com/gKx6Ot9l.jpg

Picked this old logo Nismo RHD door card gauge set from a member on here that was damaged. I fixed it and am working on something with a good guy on here as well to make an adapter to run a 52mm Defi gauge over the massive 100mm.

https://i.imgur.com/ybkAdv1l.jpg?1

https://i.imgur.com/WQBMQCxl.jpg

https://i.imgur.com/Kgpok1Xl.jpg

https://i.imgur.com/r6RJDz6l.jpg

I have to get one these ordered up, but just look at all these nice optional parts here including the HUD!!!!!! Can't wait to get the interior more sorted so I can install all these rare goodies I have been wanting to show you guys :wavey:

https://i.imgur.com/pEP9Rkal.png?1

I am going over to work on the car this Tuesday and hopefully get the rest of the line situation sorted out and maybe get the belt routing figured out. We are very close to potentially starting guys!!! I am hoping to see some smoke within the next month or so.

afishysilvia

07-02-2020, 01:04 PM

Update 7/2/20

Was able to get some work done on Tuesday with the help of parts arriving. Installed pass side valve cover and coil pack assembly.

https://i.imgur.com/O2EYR2Pl.jpg

Installed the pass side Shakitto plate and started to install the Tomei 3PT bar.

https://i.imgur.com/CS2Et45l.jpg
https://i.imgur.com/3OSpxVxl.jpg

I put the driver side valve cover on but no coil packs since it will need to come back off for me to slide the clutch master in.

https://i.imgur.com/0VtfaVvl.jpg

Next up on the todo list is the belt routing, grabbed a belt from a truck at work to check and reference. 956MM is slightly too big and I also ordered a smaller idler pulley since the tensioner and idler pulley are too close for comfort.

https://i.imgur.com/RIeXJ76l.jpg

BREAK BEAT IS FANTASTIC!!!!!

Chris absolutely knocked this project out of the park for me, he made me a custom gauge adapter for my Nismo RHD door card gauge bezel so I could run a 52MM gauge. The finish is spot on with what I had in mind. I also picked up an ashtray gauge adapter for the OEM radio trim.

https://i.imgur.com/iRIucrvl.jpg?1
https://i.imgur.com/SpmorP0l.jpg

After long search I found all (but shifter trim :( , anyone got one for sale?) in the rare kouki charcoal grey finish. Had to toss that Nismo lighter in there too :wavey:.

https://i.imgur.com/Nah8E71l.jpg
https://i.imgur.com/YEiC0Szl.jpg
https://i.imgur.com/KbgDrRbl.jpg

I wil be back at the car tomorrow since I have the day off, more destruction is coming just wait.

Break Beat

07-02-2020, 01:22 PM

Looking good! I'm loving these crazy colors haha!!

afishysilvia

07-08-2020, 01:20 PM

Looking good! I'm loving these crazy colors haha!!

Appreciate your work and products man :wavey:

afishysilvia

07-08-2020, 01:28 PM

Update 7/8/20

JP already blessing me once again with his talents, got my stuff painted up in a jiffy!!!!

https://i.imgur.com/Qg18P4ul.jpg
https://i.imgur.com/mbOqxCSl.jpg
https://i.imgur.com/CLct11hl.jpg

Got the clutch bracket painted up, Vibrant feed fitting. I will get it mounted this weekend and then I can measure and order up either a crimped line for the clutch or make my own havent decided yet.

https://i.imgur.com/ZRJHpL5l.jpg
https://i.imgur.com/Vc9nl6Rl.jpg

Started routing the fuel lines, and that big -8 is really cramping my style for routing but this works best and keeps lines away from all that heat.

https://i.imgur.com/PqzLcCOl.jpg
https://i.imgur.com/lIYmFtwl.jpg

Finished up the undercoating on the driver side front well.

https://i.imgur.com/Cbq0yO7l.jpg

My buddy is almost done with the final touches on my custom headliner, cant wait to show you the end result.

https://i.imgur.com/CAaYplrl.jpg

So the next bits are not to bash Chasebays as I love their products and company and I will continue to support them. The LS powersteering RHD option they offer works, however in order to screw the hose onto the outlet on the PS pump they recommend pulling the pulley, installing hose and then pressing pulley back on. Well....that doesn't sit right with me...

https://i.imgur.com/vEeCceHl.jpg

So well fix by removing some off the inside edge of the PS pulley, roughly .060"

https://i.imgur.com/yYYhgIAl.jpg
https://i.imgur.com/qRaxN4bl.jpg
https://i.imgur.com/oDCcYXOl.jpg

And fucking viola...

https://i.imgur.com/wsf4U8Gl.jpg

Current setup of how the bay looks, I fall back in love with the Tomei 3 PT every-time I see it. I wil be back over on Saturday to get some more done!

https://i.imgur.com/RbJsgfIl.jpg
https://i.imgur.com/sVFXIGfl.jpg

S14rebuild

07-08-2020, 03:31 PM

I swear if u could run a velocity stack for ur setup... im bout to post up an anodized hks one for sale.... in purple!!!

My fav build on zilvia...the attention to detail and awsomeness!

afishysilvia

07-08-2020, 05:39 PM

I swear if u could run a velocity stack for ur setup... im bout to post up an anodized hks one for sale.... in purple!!!

My fav build on zilvia...the attention to detail and awsomeness!

Hahaha thanks man, as sick as it would be I?d still prefer to get the fresh air from the bumper area. Hoping to have a bigger update by Sunday.

dhsil80

07-09-2020, 06:46 AM

Is that the card holder? So many unique OEM parts for the interior, can't wait to see how it turns out.

afishysilvia

07-09-2020, 08:00 AM

Is that the card holder? So many unique OEM parts for the interior, can't wait to see how it turns out.

Yes it is man! Just wasn?t in the bezel for the photo. :coold:

Thank you for the kind words!

da_crew10

07-09-2020, 11:20 AM

Blowing money fast. Great progress.

jr_ss

07-09-2020, 07:41 PM

I didn’t flip through the entire build, but what I did see looks top notch sir. What power figures are you looking for?

afishysilvia

07-09-2020, 07:51 PM

Blowing money fast. Great progress.

Thank you! Now that majority of parts are here I should be able to knock stuff out soon. First order for start up will be ensuring electrical is read to go.

I didn?t flip through the entire build, but what I did see looks top notch sir. What power figures are you looking for?

Thank you, appreciate the kind words. Well the S/C is rated for 750HP, and while that?s all great. I?m running 91, I?d prefer to see what I can do before timing pulls and the ultimate decision to go E85 or a blend of 91/100 octane. I would honestly be happy with around 500-600HP range. I wanna be able to have fun with it and not worry about it losing a piston.

However...that being said. If this motor decides to say goodbye it would only spark me to get a 7 liter block or LSR and get greedy and go for big boost numbers.

I still have my Altezza to start after this so I wanna get this one to a nice comfortable point before I down that one too.

greenwood

07-10-2020, 11:38 AM

This is great and looks like a showcar to me!

jr_ss

07-11-2020, 08:16 PM

Thank you, appreciate the kind words. Well the S/C is rated for 750HP, and while that?s all great. I?m running 91, I?d prefer to see what I can do before timing pulls and the ultimate decision to go E85 or a blend of 91/100 octane. I would honestly be happy with around 500-600HP range. I wanna be able to have fun with it and not worry about it losing a piston.

My problem with building for E85 is it builds (pun intended) fuel dependency. Plan on 91, add flex so you can run E85. Even though I have corn in my garden, I don?t have corn fuel near by and I refuse to travel excessive distances just to fill up on E.

I?d rather throw 5-10gals of 110 or another highly oxygenated fuel in the tank and let it eat those nights I want to have fun.

afishysilvia

07-28-2020, 11:33 PM

This is great and looks like a showcar to me!

Thank you man, appreciate that. I just try to keep this thing at an obtainable level.

I'd rather throw 5-10gals of 110 or another highly oxygenated fuel in the tank and let it eat those nights I want to have fun.

My thoughts exactly, 100 octane is readily available at pumps at various locations around me for roughly $10 a gallon. I would more than likely just buy a 55 gal drum of 100/110 or something in that range.

afishysilvia

07-29-2020, 12:09 AM

Update 7/28/20

Sorry its been a few weeks, I have been working on the car just have not had time to update this thread. So massive dump incoming...

Got the door panels back from my buddy, he did a stellar job with the black suede and I couldn't wait to install the Nismo gauge holder with my BreakBeat Garage custom adapter.

https://i.imgur.com/kK95M2El.jpg
https://i.imgur.com/Xol2Qykl.jpg

Getting the 3/0 starter cable and 2G interior feed wires and circuit breaker installed. New Platinum AGM battery in the Moroso sealed battery box with vent going to atmosphere.

https://i.imgur.com/PLRqP2wl.jpg
https://i.imgur.com/qS8wRsjl.jpg
https://i.imgur.com/wDY5XSTl.jpg
https://i.imgur.com/vvQlsFCl.jpg
https://i.imgur.com/MAR2YFTl.jpg

ChaseBays clutch feed line installed, really simple and looks fantastic.

https://i.imgur.com/FpbVUktl.jpg
https://i.imgur.com/CsDi0edl.jpg
https://i.imgur.com/rZSDfFEl.jpg

Radium fuel filters mounted under car, and starting to work the feed and return line routing. I will need to fab up a heatshield for the secondary filter but that shouldn't be much work.

https://i.imgur.com/B6B6TGNl.jpg
https://i.imgur.com/U1E4hkRl.jpg
https://i.imgur.com/1X8iOHyl.jpg

ChaseBays LS power steering kit routed down to the rack and wrapped in fire sleeve.

https://i.imgur.com/XpY2jzCl.jpg

My good buddy was selling his recently acquired CTSV 4 pot brake kit, which
is ideal for the 17" LMGT.

https://i.imgur.com/NMAiWZ2l.jpg

TFF is finalizing the final touches on my custom oil cooler before sending out for anodizing. Improved Racing thermostat mounted, still playing with hose ends and what fittings will be needed.

https://i.imgur.com/tD3L3e7l.png?1
https://i.imgur.com/WCD9aqQl.jpg

Finally got the Nismo power brace installed after paint, looks great.

https://i.imgur.com/YvWoq2il.jpg
https://i.imgur.com/RfU85vKl.jpg

The cooling system is finally completed, along with the Gates RPM belt came in and fitment is stellar.

https://i.imgur.com/OrnBxV8l.jpg
https://i.imgur.com/gLXTvl1l.jpg
https://i.imgur.com/AcGpSmGl.jpg

After all the valve cover accessories were mounted and coil packs it caused the feed on my regulator to run the return into my intake manifold. I switched the return to a 90 STOR fitting directly off the regulator and used a 90 hose fitting instead of the 180. Fitment is great and its not immensely better than what it even was originally.

https://i.imgur.com/a9gO9lAl.jpg
https://i.imgur.com/cI0LynMl.jpg

My next step is connecting the starter and finishing up the wiring on the engine. Fuel system is waiting to be completed as well, I plan on startup end of next month.

S14rebuild

07-29-2020, 06:37 AM

Well, it was about fukn time on the update! Shit lookn fresh asfuk good sir.

Thoses powersteering lines look close to that manifold in the pic...not worried?

afishysilvia

07-29-2020, 08:41 AM

Well, it was about fukn time on the update! Shit lookn fresh asfuk good sir.

Thoses powersteering lines look close to that manifold in the pic...not worried?

Yea man I mean I am. I wrapped them in hose fire sleeve and the headers are coated by the best in the game so I?m hoping between all of those things and Chasebays research it?ll be ok. There is not a better way to run the lines due to headers and rack clearance.

afishysilvia

09-13-2020, 07:18 PM

Update 9/13/20

Sorry for not staying up on this and being current. The car has been really taxing lately and with everything going on here in California it has caused some resistance However, updates I do have :blah:.

I've been working with Andrew at TFF for a little bit now and all I can say is how exceptional his work is and how customer service oriented he has been. My oil cooler came in, anodizing came out stellar. Lubrication system is finished up with the improved racing thermostat for the cooler.

https://i.imgur.com/DkpQCDhl.jpg

https://i.imgur.com/qdTV49bl.jpg

https://i.imgur.com/NzoyONMl.jpg

https://i.imgur.com/fNjuImxl.jpg

https://i.imgur.com/BaiEyOOl.jpg

Hoses made and sleeve'd for protection.

https://i.imgur.com/Rnvi2r6l.jpg

https://i.imgur.com/mp6oFldl.jpg

I had to remove the RH header to get the starter in....While it was out I sleeved more of the brake lines and wiring, along with placed a DEI heat shield starter blanket over the Sikky starter. Also added some 3/0 grounds to the block and starter.

https://i.imgur.com/blojNNOl.jpg

https://i.imgur.com/nsKltMrl.jpg

https://i.imgur.com/6IKJg8Rl.jpg

Finished up the Powerhouse Racing S chassis fuel hanger install with the 525LPH Ti pump. Also added a heat shield to the secondary fuel filter.

https://i.imgur.com/Kfnca8dl.jpg

https://i.imgur.com/MfqkeWBl.jpg

https://i.imgur.com/p1pSmacl.jpg

Ditched my Street faction bar for a TFF bar, fits much better and the bumper mates with it well. Had JP paint it and started slapping more stuff on the motor.

https://i.imgur.com/PFIFm12l.jpg

https://i.imgur.com/ALMJEupl.jpg

https://i.imgur.com/32V1cF6l.jpg

https://i.imgur.com/I5y1p7tl.jpg

https://i.imgur.com/0nPjxAml.jpg

One thing I saw broadfield do was integrate AN fittings to the heater system so I did it my own way. In order to keep the 3/4' nipple fittings for the heater, I had some -8AN to 3/4" barb fittings machined. Using HPS 3/4" silicon "U," I was able to plum the system to -8AN.

https://i.imgur.com/22SUOixl.jpg

https://i.imgur.com/PB6dZBql.jpg

https://i.imgur.com/ca4KPSBl.jpg

https://i.imgur.com/NQHfZtCl.jpg

A friend of mine that redid my interior in the black suede, also did up my headliner with the starlight effect. Mounted the module in the rear RH panel and will wire it to the fuse box.

https://i.imgur.com/6RKP8jel.jpg

https://i.imgur.com/sUFXPW2l.jpg

https://i.imgur.com/o8TeIA2l.jpg

After I was on my high horse I got knocked down. The new updated design Sikky uses for the oil fittings on the oil pan have allen head bolts that go from pan flange down into fitting block with copper crush washers. My pan started leaking right as I put oil in it from the bolt threads. So instead of pulling motor, I supported the motor with the hoist then removed the lower crossmember then pan.

https://i.imgur.com/fIxOgpwl.jpg

I went to my local part store and got some much better fitting copper crush washers, and decided to also seal them off with black silicon to ensure no more leak.

https://i.imgur.com/1UW2aBtl.jpg

https://i.imgur.com/JU28vGkl.jpg

https://i.imgur.com/bwgvYZnl.jpg

Oil pan went back in smoothly, no leaks and motor is back as it should be.

https://i.imgur.com/S6CQxhzl.jpg

These next two photos are what the car currently looks like at the moment. I want to have it running and tip top shape before I install the windshield and dash. I am getting the Link Storm set up with Mark Panic. I need to make timing marks once I find TDC and then hit the engine with a timing light. It wants to crank but sounds like its hitting on the wrong cylinder. I am using the same motor setup (minus S/C) so the LS2 front timing sensor shouldn't have any problems, its just getting the trigger angle in the tuning correct. I ran out of time again so it'll have to wait till this weekend. Sorry for the lag, I assure you the car is still being worked out despite all my setbacks :facepalm:

https://i.imgur.com/q8vAaT6l.jpg

https://i.imgur.com/zSvt1FNl.jpg

afishysilvia

09-15-2020, 01:04 PM

Alright sorry for the delay :)

S14rebuild

09-15-2020, 01:24 PM

DONT you ever make us wait this long for an update!

Shit is looking fire as fuk...got 5k in heat/protective sleeving lol.

afishysilvia

09-15-2020, 07:15 PM

DONT you ever make us wait this long for an update!

Shit is looking fire as fuk...got 5k in heat/protective sleeving lol.

Hahaha sorry man I forget to update here as well. I?m hoping to have this thing started this weekend. Gonna get the timing done and hopefully we?ll see some smoke.

Seriously haha, every time I go I say I only need a little and end up with rolls of different sizes and a ton extra. Hopefully it all works and does as intended.

shaggyjake

09-21-2020, 02:54 AM

Alright sorry for the delay :)

that's ok, just don't let it happen again.

afishysilvia

09-21-2020, 09:50 AM

that's ok, just don't let it happen again.

Hahaha hey buddy.

Well I routed my fuel lines incorrectly. A normal person would have read instructions on the new Radium DMR pressure regulator but I didn?t. So basically my feed and return were just making a big U. I need to move my pressure gauge, move my feed line over and should be good. Saturday I got the Link dialed in after I found TDC #1 and used a timing light to verify where I was. It?s definitely been frustrating but learning a lot and super happy with the progress.

The car started on brakleen, and I lit my arm on fire but it was so nice to hear it again. I?m going today to the local store for some bulk AN hose and a few fittings. Tomorrow I?m off and will be back on the car, should have a running update tomorrow :D