burn1496
06-12-2018, 04:45 PM
Hello guys, Hope y'all have a nice summer . Any way , Today I just finished swapping out the head of the 92 ka24de and put on a 95 ka24de head. I had mostly everything connected but I was confuse and can't find any thread about the EGR connector (EGR and canister control solenoid valve). Because on a s14 head there is only 1 connector for EGR, however on the s13 harness they have 2 connector for the EGR . One is for ( EGR and canister control solenoid valve) and the other one is for ( scv control solenoid valve) . So my question was, How can I make it work on the s13 harness ? I was planning to cut the Canister and egr control solenoid connector, and solder the s14 male connector to it. Please let me know thank you so much and have a good one!