xtahoex
06-09-2018, 02:26 PM
Hi all,
I have a Datsun project with an SR20DET that I am having a problem with. The oil spraybars above the cams are just barely dribbling oil out of the 1 hole on the bar (the closest hole to the oil supply). I removed the bars and used compressed air and carb cleaner to flush them. I reinstalled and no change. The car has an oil filter sandwich adapter, with remote oil filter and an oil cooler. I am showing oil pressure at cold idle of 65 to 70 PSI so it seems as though pressure is not a problem? The Oil Pressure sensor is mounted on the sandwich plate. What should I check next?
Thanks,
Ryan
I have a Datsun project with an SR20DET that I am having a problem with. The oil spraybars above the cams are just barely dribbling oil out of the 1 hole on the bar (the closest hole to the oil supply). I removed the bars and used compressed air and carb cleaner to flush them. I reinstalled and no change. The car has an oil filter sandwich adapter, with remote oil filter and an oil cooler. I am showing oil pressure at cold idle of 65 to 70 PSI so it seems as though pressure is not a problem? The Oil Pressure sensor is mounted on the sandwich plate. What should I check next?
Thanks,
Ryan