240sx Start Up

[outfronts13]

Well I finally finished my first ever headgasket replacement job on my ole 240sx. I went to fire her up and realized that I wasnt able to build up pressure for the engine to start. I had to replace the starter and it cranks fine. Well while searching and reasoning for why I had no pressure I realized that I have a huge vacuum leak for the Ka24e intake manifold due to im missing a bolt. :picardfp: I realized that bolt has been missing the whole time when I took the head off and I dont remember removing it. https://www.flickr.com/photos/[email protected]/41917210622/in/dateposted-public/

[outfronts13]

Well I finally finished my first ever headgasket replacement job on my ole 240sx. I went to fire her up and realized that I wasnt able to build up pressure for the engine to start. I had to replace the starter and it cranks fine. Well while searching and reasoning for why I had no pressure I realized that I have a huge vacuum leak for the Ka24e intake manifold due to im missing a bolt. :picardfp: I realized that bolt has been missing the whole time when I took the head off and I dont remember removing it. https://www.flickr.com/photos/[email protected]/41917210622/in/dateposted-public/



https://uploads.tapatalk-cdn.com/20180507/da81f2004e5271e3d4a579ef29ad5cdb.jpghttps://uploads.tapatalk-cdn.com/20180507/28086323481cc3ac0b10866fa7df1bb7.jpg



Sent from my iPhone using Tapatalk

[staying_chuki]

Is this a question orr what? Lol


Sent from my iPhone using Tapatalk

[outfronts13]

Lol i just wanna know if something important goes their that I missed


Sent from my iPhone using Tapatalk

[jedi03]

if you have a vacuum leak there then definitely...I would look for your "extras" that are not on the car for what could have gone there...

[oLemurs]

i have plenty of missing bolts its ok unless you have a vacuum leak, just do a test