PDA

View Full Version : [WTB] S13 Power Sunroof Subharness (Runs up A-Pillar)

gripROYAL
03-08-2018, 01:54 PM
I am looking to purchase an unmodified s13 power sunroof harness. This is the harness that connects from the dash harness on passenger side and runs up the a-pillar with a few plugs on the sunroof end. There aren't many 240's in my local yard nor do I have the time to go hunting on this one piece. Please let a friend know that may have this harness rotting away in a shell or box somewhere. Paypal ready! For the quickest way to get in touch with me for payment is email, [email protected] Thanks!~
-Scott
gripROYAL
03-13-2018, 06:40 AM
BUMP - still really need this to complete my build, thanks! -Scott
Krusty_s13
03-13-2018, 06:57 AM
I may still have one in a pile somewhere. I'll double check and shoot you an email.
gripROYAL
03-13-2018, 07:34 AM
I may still have one in a pile somewhere. I'll double check and shoot you an email.

THANK YOU SO MUCH <3

I started with a bare shell and no parts and have decided to restore as many factory functions as possible. It's been a super big pain finding all of these little pieces folks normally trash!
Krusty_s13
03-13-2018, 07:45 AM
THANK YOU SO MUCH <3

I started with a bare shell and no parts and have decided to restore as many factory functions as possible. It's been a super big pain finding all of these little pieces folks normally trash!

With the scarcity of factory s chassis parts, I don't even want to think of the headache you are going through lol. I'll check after work. That's the harness that powers the sunroof and the map light correct?
gripROYAL
03-13-2018, 08:24 AM
With the scarcity of factory s chassis parts, I don't even want to think of the headache you are going through lol. I'll check after work. That's the harness that powers the sunroof and the map light correct?

Correct! It plugs in with two plugs at the bottom of the A-pillar on the passenger side. Goes up and plugs into all of the stuff on the front-roof area inside. I'll try to reply with images to help as well that I have saved for reference from my phone.

Really appreciate the help and am looking forward to your reply! The schematic is in the FSM but I really really don't want to remake the harness from scratch and not have factory plugs etc. THANKS!

-Scott
gripROYAL
03-13-2018, 08:25 AM
Dash side plughttps://uploads.tapatalk-cdn.com/20180313/31929c42f8bc370be91ceaa06fb7c996.jpg

Sent from my SM-N950U using Tapatalk
gripROYAL
03-13-2018, 08:25 AM
Sub harness diagramhttps://uploads.tapatalk-cdn.com/20180313/575d0f8adc35299c82ab19163ec95f0e.jpg

Sent from my SM-N950U using Tapatalk