HUGE storage clean out - sr20,GTR,jdm, tial, ikeya formula lca, z brakes, etc. LOOK

[wolf904]

-Located in Jacksonville, FL (North East Florida)
-I can drive to meet if you're buying multiple items, buying expensive items, or
paying gas money.
-Pickup is preferred.
-Shipping is available for most items
-Contact: PM or (904) 214 2424 text anytime.

I have a ton of random miscellaneous parts I've gathered through multiple cars throughout the years. Will try to sell on here first before I post up for the locals to stab at.

- PAIR of R34 GTR wheel center caps. $60 obo!!!!!! NEED GONE

https://farm5.staticflickr.com/4727/24369553537_caba49fb1f_b.jpg (https://flic.kr/p/D8skfa)20171128_112928 (https://flic.kr/p/D8skfa) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4734/38355775635_58dc8df07f_b.jpg (https://flic.kr/p/21rnnNt)20171128_112939 (https://flic.kr/p/21rnnNt) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- BLITZ tuned sr20det ecu. Believe its just a safer map for turned up boost sr's using a stock setup with bolt ons. Worked good on my SR. $200 or fair offer

https://farm5.staticflickr.com/4680/38355774205_3f7742e175_b.jpg (https://flic.kr/p/21rnnnP)20171128_113452 (https://flic.kr/p/21rnnnP) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4639/38355772725_fcfaefeb6a_b.jpg (https://flic.kr/p/21rnmWi)20171128_113508 (https://flic.kr/p/21rnmWi) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- AEROMOTIVE Tsunami fuel pump , and aeromotive fuel filter. Comes with AN Fittings with pushlock lines. Enough lines to do an entire s14 front to rear. External fuel pump ,was pulled from my car in good working condition. The fuel pump alone is like 350 new I think, I will sell lines, fuel filter, and pump with mounting clamps all together for $200.

https://farm5.staticflickr.com/4691/24369518757_33cda838be_b.jpg (https://flic.kr/p/D8s9Uv)20171130_132903 (https://flic.kr/p/D8s9Uv) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4590/24369519707_de793020d4_b.jpg (https://flic.kr/p/D8sabT)20171130_132806 (https://flic.kr/p/D8sabT) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr


- IKEYA formula ADJUSTABLE lower control arms. Heim joints instead of bushings, and beefy balljoints with some roll center correction built in I believe. $275 obo for these, fairly rare and honestly a super cool part.comes with hardware also

https://farm5.staticflickr.com/4680/27455533109_a968fb1cf6_b.jpg (https://flic.kr/p/HQ9Msv)20171128_131438 (https://flic.kr/p/HQ9Msv) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4597/25365665208_40474304a6_b.jpg (https://flic.kr/p/EDtExj)20171128_131459 (https://flic.kr/p/EDtExj) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- Japanese Real Carbon FET Rear strut bar. I specifically know this will work for s13 hatch since thats what i pulled it off of. $80 obo.

https://farm5.staticflickr.com/4690/24369513217_e977aedc15_b.jpg (https://flic.kr/p/D8s8fZ)20171130_133827 (https://flic.kr/p/D8s8fZ) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4682/24369511997_ec4b082515_b.jpg (https://flic.kr/p/D8s7TX)20171130_133830 (https://flic.kr/p/D8s7TX) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- ARC front sway bar with bushings brackets and spherical end links. $100

https://farm5.staticflickr.com/4682/38523784094_f8247ec593_b.jpg (https://flic.kr/p/21GdsS3)20171130_133153 (https://flic.kr/p/21GdsS3) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4647/39230914101_7b532ff6d8_b.jpg (https://flic.kr/p/22LGFYH)20171130_133145 (https://flic.kr/p/22LGFYH) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- RB25/20 Cast manifold. one broken stud but easy fix with a easy out. $30

https://farm5.staticflickr.com/4692/24369523247_6e95885627_b.jpg (https://flic.kr/p/D8sbeV)20171130_131942 (https://flic.kr/p/D8sbeV) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

-Sr/Ka manual transmission, no bellhousings, however this was a good trans, wire wheel and bellhousings would probably have it fine, or just use it for pieces. $40

https://farm5.staticflickr.com/4732/38523793824_c11b6dec5c_b.jpg (https://flic.kr/p/21GdvKN)20171130_133346 (https://flic.kr/p/21GdvKN) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr


-RB25DET S2 AC COMPRESSOR, PULLEY AND BRACKET. ALSO HAS FITTINGS. $80
- S13 and S14 AC compressors. have high and low pressure lines, and some condensors as well. make offer on whatever you need.

https://farm5.staticflickr.com/4633/39230915591_db288586be_b.jpg (https://flic.kr/p/22LGGqp)20171130_132457 (https://flic.kr/p/22LGGqp) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4684/38523792244_25bed977db_b.jpg (https://flic.kr/p/21Gdvhy)20171130_133716 (https://flic.kr/p/21Gdvhy) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- S chassis' sway bars front and rear. $20 a piece.

https://farm5.staticflickr.com/4597/38523788904_e2d0e0324c_b.jpg (https://flic.kr/p/21GduhY)20171130_133932 (https://flic.kr/p/21GduhY) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- S14 White cluster in unknown condition. $25

https://farm5.staticflickr.com/4691/39230913721_277d1a174d_b.jpg (https://flic.kr/p/22LGFSa)20171130_133218 (https://flic.kr/p/22LGFSa) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- Cast log mani for Sr20 i believe t3 and t4 flange, have a top mount garret t3 turbo and wastegate i can include with it all. I have no idea what any of it is, turbo doesnt really feel like it has noticeable play, could be fine, $150 should be worth the risk for a setup that could make mid to high 300s and never crack a runner.

https://farm5.staticflickr.com/4646/39230918631_bb61be50a5_b.jpg (https://flic.kr/p/22LGHjP)20171130_131744 (https://flic.kr/p/22LGHjP) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4593/24369524237_1161e0b9eb_b.jpg (https://flic.kr/p/D8sbwZ)20171130_131818 (https://flic.kr/p/D8sbwZ) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4679/24369523737_65fc4025df_b.jpg (https://flic.kr/p/D8sbon)20171130_131829 (https://flic.kr/p/D8sbon) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- SR20 and I believe KA metal fan shroud for radiator and dual efans with some wiring. Perfect for you guys wanting to make room in your engine bays and run efans, the shroud is what makes it efficient. $100 for these or close offer.

https://farm5.staticflickr.com/4731/38523792704_361f72f799_b.jpg (https://flic.kr/p/21Gdvqu)20171130_133631 (https://flic.kr/p/21Gdvqu) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- Resealed, known good working sr20det transmission. no grinds no noises. the issue is there a s13 non abs japanese driveshaft stuck in it. these driveshafts dont have the rubber coupler by the yoke which is a common failure point. I will sell it all together for $100. without the bellhousing I will take $60. This could be a easy fix. I paid $80 for the driveshaft from a friend who brought it back with his silvia and never once ran it, and $100 for the transmission as a KA trans before I put my own sr bellhousing on it. just taking up space. Is probably a easy fix.

https://farm5.staticflickr.com/4735/38523787774_92ffd03bef_b.jpg (https://flic.kr/p/21GdtXu)20171130_134022 (https://flic.kr/p/21GdtXu) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4642/27455535079_c43963c06b_b.jpg (https://flic.kr/p/HQ9N3t)20171130_134027 (https://flic.kr/p/HQ9N3t) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- S13 powersteering rack with tie rods. Didn't leak in the short period it was on the car however I didnt drive it much, it just had fluid in the ps reservoir. I only removed it because I had a new one for my car. $50 for this.

https://farm5.staticflickr.com/4730/38523786264_d3c35de679_b.jpg (https://flic.kr/p/21Gdtvs)20171130_134335 (https://flic.kr/p/21Gdtvs) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- RB25DET (s2 if it matters) flywheel oem. $30

https://farm5.staticflickr.com/4642/39230916011_5e08bf6e06_b.jpg (https://flic.kr/p/22LGGxD)20171130_132411 (https://flic.kr/p/22LGGxD) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- 2 OEM sr20det Flywheels. $20

https://farm5.staticflickr.com/4692/39230916611_70b310fc1a_b.jpg (https://flic.kr/p/22LGGHZ)20171130_132328 (https://flic.kr/p/22LGGHZ) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- S13 sr20det random stuff. throttle body, water pump pulley, shifter boot metal ring , intake, water neck. pm offers on what you want

https://farm5.staticflickr.com/4636/24369520457_4517655cce_b.jpg (https://flic.kr/p/D8sapP)20171130_132637 (https://flic.kr/p/D8sapP) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- S13 Sr20det blacktop valve cover. fine condition, perfect for a spare to powdercoat. $50. Don't mind keeping this, just figure id post up incase someone wants

https://farm5.staticflickr.com/4647/38523818304_46acfb581c_b.jpg (https://flic.kr/p/21GdD2S)20171128_125955 (https://flic.kr/p/21GdD2S) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4593/25365668908_cf0a01704a_b.jpg (https://flic.kr/p/EDtFD7)20171128_130011 (https://flic.kr/p/EDtFD7) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- OEM s13 KA24DE Distributor cover. Pretty cool piece you don't see often $30

https://farm5.staticflickr.com/4636/38523821634_7dcb0b60d7_b.jpg (https://flic.kr/p/21GdE2h)20171128_114057 (https://flic.kr/p/21GdE2h) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4591/24369660747_3f805f7b82_b.jpg (https://flic.kr/p/D8sT7B)20171128_114108 (https://flic.kr/p/D8sT7B) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- Random s chassis steering wheel hub. I have the rubber surround for it just wasn't pictured. $ 20

https://farm5.staticflickr.com/4736/38355770725_91fc0623ef_b.jpg (https://flic.kr/p/21rnmkP)20171128_114023 (https://flic.kr/p/21rnmkP) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- Older HKS SSQV $20

https://farm5.staticflickr.com/4645/25365673948_5c084d1019_b.jpg (https://flic.kr/p/EDtH91)20171128_114038 (https://flic.kr/p/EDtH91) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4682/38523822384_9a33724b2a_b.jpg (https://flic.kr/p/21GdEfd)20171128_114046 (https://flic.kr/p/21GdEfd) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- OEM s14 calipers in good working condition. No brackets or boots, but thread fine and come with lines. $40

https://farm5.staticflickr.com/4641/38355771845_80b9313edb_b.jpg (https://flic.kr/p/21rnmF8)20171128_113752 (https://flic.kr/p/21rnmF8) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4596/38355771235_7c1cee027e_b.jpg (https://flic.kr/p/21rnmuB)20171128_114004 (https://flic.kr/p/21rnmuB) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

- S14 Ebrake cables, one left one right and one extra forgot which of. $40 for a pair, $20 for the extra one obo.

https://farm5.staticflickr.com/4646/38355926385_ee4b5f1bde_b.jpg (https://flic.kr/p/21ro9BB)20171128_113657 (https://flic.kr/p/21ro9BB) by Gabe Esquivias (https://www.flickr.com/photos/[email protected]/), on Flickr

[je_decoy]

bump up txt sent

[carcrazee]

wow my old pignose lip, I know where u got that from haha, bump for you

[wolf904]

bump up txt sent

All texts responded too.

Lets keep it moving! Trying to ship out more parts today. Keep texting me

[wolf904]

BOV sold, speed sensor pending now! Who wants this pignose lip? ARC swaybar and rear strut bar also currently pending.

Also I forgot I have TEIN 350z inner tie rods, and clean s14 door panels confetti pattern if anyone wants!!!!!!

[Po_31]

If the speed sensor doesn't sell I'll take

[wolf904]

If the speed sensor doesn't sell I'll take

If I dont hear back from him or if he doesnt paypal me soon Ill pm you.

[slow.s13]

BOV sold, speed sensor pending now! Who wants this pignose lip? ARC swaybar and rear strut bar also currently pending.

Also I forgot I have TEIN 350z inner tie rods, and clean s14 door panels confetti pattern if anyone wants!!!!!!

that was me that texted u yesterday about the pig nose lip lol lemme know how much shipping will be brotha. merry christmas!

[sidewaysil80]

I want the trans/driveshaft and the valve cover. Any idea how to ship said items?

[wolf904]

I want the trans/driveshaft and the valve cover. Any idea how to ship said items?

I can get a UPS quote but it probably wont be cheap?

[wolf904]

BOV, LCA'S, and Speed sensor are all accounted for and getting priority shipped out tomorrow/tuesday. Anyone else want to place some orders so I can get their items shipped out same day? PM me!

[red_240]

Any idea if any of the high pressure AC lines is from a 97-98 240sx?

[wolf904]

Any idea if any of the high pressure AC lines is from a 97-98 240sx?

I can check this week.

S14 LCA, Speed sensor, and BOV are SOLD.

[wolf904]

Ikeya toe arms sold.

Adjustable FLCA still available. All other parts still available

[Mr.slipngrip]

Ill take the momo hub shipped to 32807.

[RB25GUY]

that carbon strut bar is a FET BAR really cool!

[wolf904]

Ill take the momo hub shipped to 32807.

Check PM!!!!!!!!!!

that carbon strut bar is a FET BAR really cool!


Any more info? Might keep the shit

[wolf904]

bump to the top, pignose lip is pending locally, momo hub is pending as well.

Z brakes and other parts still available

[signal240sx]

Darn...I pmed u while back on lip.let me know if sale falls thru please

Sent from my GT-P5113 using Tapatalk

[wolf904]

Lip is sold, z brakes are sold, lets keep it moving

[izzyou22]

pig nose lip shipped to 94565?

[junkfoodie]

Want the rear strut bar if still available. need it shipped to CA, 94566

[RalliartRsX]

PMd in regards to the HVAC lines.

[afishysilvia]

Is the S14 gauge cluster for zenki or kouki?

[wolf904]

Want the rear strut bar if still available. need it shipped to CA, 94566

Still have the FET carbon bar, shoot me a text!!!!!!!

PMd in regards to the HVAC lines.

shoot me a text and ill find the lines

Is the S14 gauge cluster for zenki or kouki?

unsure, just know its white face, shoot me a text

[nism014]

got the IACV?

[Fitelite240]

Is the fuel pump set up e85 compatible?

[red_240]

If one of those high pressure AC lines is from a 97-98 I’ll take it!

[volgapower]

OEM silvia front knuckles only needed for 5 lug bearings. i could not find in list, are those available?

[wolf904]

Hey I just updated the FS ad to reflect what is still available ! Please pm me I want to get everything sold and out of my storage unit.

If someone buys both transmissions Ill cut a sweet deal with them and the driveshaft!

Also want sr turbo setup gone!

if you know anyone who needs 34 gtr caps plz send my way, and still got these ikeya FLCA too!!

[wolf904]

got the IACV?

I do!! text me man

Is the fuel pump set up e85 compatible?


I see no reason why it wouldnt be, its a badass pump the setup new would cost like over 400 with all lines and fittings. Text me I can ship the pump and filter or pickup is available with lines

[roodog]

if the s14 gauge cluster is still for sale i'll take it

[afishysilvia]

Been waiting for a reply on the cluster dude

[wolf904]

More parts shipped out / sold. Texts responded to. Lets get everything sold!!! I am negotiable! Text me about what you need

[RalliartRsX]

texted about ac lines

[wolf904]

Bump. Making a seperate post today with all ac stuff pictured since i get so many requests. Still want the last of this sold tho

[RalliartRsX]

Did you get my text?

[Ichi-Go]

I got my items, everything is as advertised.

For the people having texting issues. I think his phone is having issues receiving from certain carriers. I also had trouble but we were able to get in touch and everything was smooth.

[wolf904]

Bump im taking offers, the more you buy the better the deal. Just got my wisdom teeth pulled help me reup on percocets

[RalliartRsX]

AC lines??

[wolf904]

AC lines??

Did you not get a text back? Probably my phone. Yes i still have lines im gonna pm you photos instead

[RalliartRsX]

Nope no pics. I will pm you my number.

[wolf904]

Still available. Need gone. Text or pm offers

[RalliartRsX]

Pics of AC lines (through PM)??