teelcat
10-27-2017, 05:13 PM
just finished up a ka24de swap on my s13 , the car was already a ka24de , but it was an s14 ka so it was internal ignition coil dizzy and slightly different manifold . Due to ringland failure we swapped the whole motor , harness and ecu alone with adding the s13 style dizzy and external ignition coil . Now the car is not getting any spark at all , no power to the coil , no power from the ecu , i checked the pin at the ecu that corresponds with the ignition coil power and got no power when cranking , no power at all to dizzy , no power to ignition control on top the coil either , we tried a known good ecu from a running car and this did not solve the issue , all fuses and relays look fine also . Any input is appreciated