Ilya
10-17-2017, 12:46 AM
Hey Gang,
I have for sale a 3-Gauge Holder plate that is inserted into the S13 Radio bezel.
It can support 3 x 52mm gauges with maximum gauge bezel size of 55.5mm.
(I used VDO Vision Black which are 51.5mm with a 55mm face bezel)
What you get:
- 1/4 inch plate with 3 x 52mm holes cut out for gauges
- piece of micro suede to cover the plate to give a great finish.
Installation:
- Modify the plate for your project (cut out hole for your deck, add more holes for some switches or warning lights,etc.)
- Use some spray adhesive, stretch on the finishing suede fabric and let dry.
- Cut out the holes in the fabric for your accessories (see last picture for example of how I slot-cut the fabric to allow for gauges to fit in).
- Trim the fabric at least 1/4 inches away from the perimeter of the insert-plate
- Install the plate into the S13 Radio Bezel hole until the plate is flush with the trim.
- Use some JB Weld, hot glue, tape, etc to hold the plate in place.
Price: $75 Shipped
http://imagizer.imageshack.us/v2/640x480q90/924/zbTrhf.jpg (https://imageshack.com/i/pozbTrhfj)
http://imagizer.imageshack.us/v2/640x480q90/924/fnCGUD.jpg (https://imageshack.com/i/pofnCGUDj)
Here is what it looks like when you install it using the micro-suede (3 Holes not shown in picture):
http://imagizer.imageshack.us/v2/640x480q90/923/D1cS6A.jpg (https://imageshack.com/i/pnD1cS6Aj)
http://imagizer.imageshack.us/v2/640x480q90/922/VlLrxJ.jpg (https://imageshack.com/i/pmVlLrxJj)
http://imagizer.imageshack.us/v2/640x480q90/923/EgAimI.jpg (https://imageshack.com/i/pnEgAimIj)
Here is one I modified for my project:
http://imagizer.imageshack.us/v2/640x480q90/924/xKlAo6.jpg (https://imageshack.com/i/poxKlAo6j)
http://imagizer.imageshack.us/v2/640x480q90/923/u3qdVz.jpg (https://imageshack.com/i/pnu3qdVzj)
http://imagizer.imageshack.us/v2/640x480q90/923/MkmWwM.jpg (https://imageshack.com/i/pnMkmWwMj)
http://imagizer.imageshack.us/v2/640x480q90/922/u53pDJ.jpg (https://imageshack.com/i/pmu53pDJj)
http://imagizer.imageshack.us/v2/640x480q90/924/IWq6yM.jpg (https://imageshack.com/i/poIWq6yMj)
http://imagizer.imageshack.us/v2640x480q90/922/4AaZjB.jpg (https://imageshack.com/i/pm4AaZjBj)
http://imagizer.imageshack.us/v2/1024x768q90/923/w8OUc6.jpg (https://imageshack.com/i/pnw8OUc6j)
I have for sale a 3-Gauge Holder plate that is inserted into the S13 Radio bezel.
It can support 3 x 52mm gauges with maximum gauge bezel size of 55.5mm.
(I used VDO Vision Black which are 51.5mm with a 55mm face bezel)
What you get:
- 1/4 inch plate with 3 x 52mm holes cut out for gauges
- piece of micro suede to cover the plate to give a great finish.
Installation:
- Modify the plate for your project (cut out hole for your deck, add more holes for some switches or warning lights,etc.)
- Use some spray adhesive, stretch on the finishing suede fabric and let dry.
- Cut out the holes in the fabric for your accessories (see last picture for example of how I slot-cut the fabric to allow for gauges to fit in).
- Trim the fabric at least 1/4 inches away from the perimeter of the insert-plate
- Install the plate into the S13 Radio Bezel hole until the plate is flush with the trim.
- Use some JB Weld, hot glue, tape, etc to hold the plate in place.
Price: $75 Shipped
http://imagizer.imageshack.us/v2/640x480q90/924/zbTrhf.jpg (https://imageshack.com/i/pozbTrhfj)
http://imagizer.imageshack.us/v2/640x480q90/924/fnCGUD.jpg (https://imageshack.com/i/pofnCGUDj)
Here is what it looks like when you install it using the micro-suede (3 Holes not shown in picture):
http://imagizer.imageshack.us/v2/640x480q90/923/D1cS6A.jpg (https://imageshack.com/i/pnD1cS6Aj)
http://imagizer.imageshack.us/v2/640x480q90/922/VlLrxJ.jpg (https://imageshack.com/i/pmVlLrxJj)
http://imagizer.imageshack.us/v2/640x480q90/923/EgAimI.jpg (https://imageshack.com/i/pnEgAimIj)
Here is one I modified for my project:
http://imagizer.imageshack.us/v2/640x480q90/924/xKlAo6.jpg (https://imageshack.com/i/poxKlAo6j)
http://imagizer.imageshack.us/v2/640x480q90/923/u3qdVz.jpg (https://imageshack.com/i/pnu3qdVzj)
http://imagizer.imageshack.us/v2/640x480q90/923/MkmWwM.jpg (https://imageshack.com/i/pnMkmWwMj)
http://imagizer.imageshack.us/v2/640x480q90/922/u53pDJ.jpg (https://imageshack.com/i/pmu53pDJj)
http://imagizer.imageshack.us/v2/640x480q90/924/IWq6yM.jpg (https://imageshack.com/i/poIWq6yMj)
http://imagizer.imageshack.us/v2640x480q90/922/4AaZjB.jpg (https://imageshack.com/i/pm4AaZjBj)
http://imagizer.imageshack.us/v2/1024x768q90/923/w8OUc6.jpg (https://imageshack.com/i/pnw8OUc6j)