Oil return from stock catch can to block loose.

[nighthawklude99]

The part that you hook the hose onto from the factory catch can that attaches to the block right behind the turbo is loose and I suspect it may be leaking oil. I can rotate it side to side without to much effort. Is there a way to tighten this, I can't really look at it without removing the turbo.

Thanks Jason

[gaz_moose]

if its like on an SR they are not threaded, they are push/interference fit. so you should be able to wiggle it out/clean it up and put something on it to 'glue' it back in. I would use RTV or Loctite. just check the melting temp of whatever you use.