Simple street style S15 drift car

[Just Jimmy]

Hi All,

Had a few mates tell me about Zilvia so thought i'd check it out.

Bought a stock s15 Spec R about 18 months ago and have been slowly bulding it up.
This was the starting point, clean Spec R no aero.
http://i.imgur.com/bSNAj4b.jpg.

It Started snow balling from here.

I'll give a full mod list if people care to see it.

One of many parts orders. Note GP Sports (dg5) coilovers, top buy.

http://i.imgur.com/MDGxF5D.jpg

Missing quite alot but would also rather spam photo than parts lists.

To just get it out last year i bought some RPF1s.

http://i.imgur.com/wnjksIq.jpg

They were never going to last.

http://i.imgur.com/Xak2CXs.jpg

Got my interior sorted with a pair of Recaro SPA's etc..

http://i.imgur.com/XHYqLoj.jpg

Pic with the daily and support vehicle

http://i.imgur.com/ABZOTnI.jpg

Did skids and broke 3rd gear on my first lap, due to new ORC twin plate and stock 6 speed.

http://i.imgur.com/E7Qh4Q3.jpg.

Car has been sitting for 2 weeks with a broken trans while i wait for a new one to turn up.

Just like everyone i have plans to make it quicker and look better.

Thanks for reading

[Reece]

Very good so far

[TheRealSy90]

Just do a Z33 transmission already :D

[Just Jimmy]

Just do a Z33 transmission already :D

Now that would be the smart move.

I have a 6 speed sorted for this weekend, I'll be ordering a new RB25 trans soon as I don't like the feel on the remote shifter on the Z32 box.

Also have a brand new ORC twin plate that I've done maybe 500kms on that I can't use with the swap. So trying to not throw $2800 down the drain.

[RB25GUY]

Dope Silvia man!!!! That/Those SP-GT2(s) in kevlar tho :coolugh:

[Just Jimmy]

Dope Silvia man!!!! That/Those SP-GT2(s) in kevlar tho :coolugh:

Thanks mate.

They were a silly purchase, went to buy Brides they had these in stock.

[DrftKingIII]

Lovely thus far. Keep up the good work.

[hanzbrady]

Now that would be the smart move.

I have a 6 speed sorted for this weekend, I'll be ordering a new RB25 trans soon as I don't like the feel on the remote shifter on the Z32 box.

Also have a brand new ORC twin plate that I've done maybe 500kms on that I can't use with the swap. So trying to not throw $2800 down the drain.

That clutch would work with the Mazworx SRVQ bell housing.

***Edit I didn't read your post correctly I thought you meant that you had that twin plate for the Z32/RB box. Anyways I'm loving the style of the build and it just makes me more and more sad that the S15 never made it state side!

[Will.]

anymore pics of the interior and seats?

what rails are you using? currently have a SPG on recaro rails in my s15

[tricky_ab]

This is going to be a quality build... I'm all for this!

[Just Jimmy]

Thank you for the kind words guys. My plan to to stick with the quality clean theme.

Hanzbrady- I know a guy back in Australia that can do a cut and shut bellhousing for a RB/Z32 trans. Will get it ordered along with a new RB25 trans in winter.

Will- currently using Buddy Club rails and I'm not a fan, going to order street faction fixed rails so I can go lower as it's only me that drives the car and they look quality.

[Just Jimmy]

Update from my phone, so please don't judge the horrible English skills.

[WPN-X7]

well wasnt expecting to see this bad boy on here.

quality rig. should have just gone 25 box and not even bothered with another 6 speed though haha

[Will.]

thanks mate,

i'm looking to get another spg for my passenger aswell to match

[Just Jimmy]

anymore pics of the interior and seats?

what rails are you using? currently have a SPG on recaro rails in my s15

This is the best i can do with them still in the car, actually thinking about going to a OEM passenger seat so i can use my back seat again.
http://i.imgur.com/72qZjKh.jpg?1

[Just Jimmy]

So i thought it's time for a small update and a few photos.

Boring stuff first, got my new trans in and turns out it has a bad input shaft bearing so it pretty much sounds like i gave a dog box (vid on IG for anyone that wants to see), thinking my ORC twin plate isn't going help preserve transmissions.

http://i.imgur.com/C2FX69b.png?2

Managed to get the new water pump and belts in, still need to tidy it up but here is how the engine bay sits, i really didn't add much to the original post.

http://i.imgur.com/mDKMR3H.jpg?1

Almost ready for D1SP on Saturday, just have to fix a lose belt and exhaust leak.

http://i.imgur.com/fbv4fjJ.jpg?1

http://i.imgur.com/A0KENoS.jpg?1

[tricky_ab]

Have fun this weekend! Still kinda bummed that I couldn't make it out....

[Just Jimmy]

Have fun this weekend! Still kinda bummed that I couldn't make it out....



Thanks dude, shame you can't make it out.


Sent from my iPhone using Tapatalk