PDA

View Full Version : VA 1995 KA24DE Engine Parts, 5spd trans, exhaust, etc


Nickvas81
07-03-2017, 11:44 AM
I have some leftover engine parts. Everything came out of my 1995 Nissan 240sx Se. The car had 22X,XXX miles when the engine and transmission were pulled. Just inquire if you don't see an engine item listed you need. Pickup/local only. Im willing to trade for VQ35DE engine swap parts. Everything is obo.

Items Available

- Alternator $50
- Alternator Bracket $10
- Engine Brackets and Mounts $60
- A/C bracket $10
- Timing Chain w/ tensioners and all gears (including cam). $20
- Pulley 10 (3 avail)
- Clutch $30
- Flywheel (ding on corner) $10
- Fuel Rail w/ Injectors (new rings & caps), and FPR (also included: Spacers and hardware) $115
- S13 aftermarket exhaust (I believe its a Greddy) $100
- Injen Intake $40
- Oil Pan $30
- Spark plug wires $5 Ea (3 Available)
- Starter $50
- OEM used head bolts Free
- Valve cover (comes w/ semi-used gasket if wanted) $40
- Upper & Lower Timing cover with oil pump $50
- Water Pump $15
- Distributor $50
- IACV $20
- Intake Manifold $50 (separated/can add hoses for free if wanted, but most are cracked)
- 5 Speed manual Transmission $200 (225,XXX miles on dash)
- Bottom Half of Air filter box w/ sensor $5
- Ebay strut tower bar $10
- Aftermarket Headers (cracked) $15
- MAF (has broken bolt tab, but could still be used with some RTV) $15
- NEW Felpro Conversion Gasket set

Sold Items:
- Block (assembled)
- Head (assembled)
- Engine harnesses

Nickvas81
07-04-2017, 04:08 PM
I can send photos if requested.

Nickvas81
07-08-2017, 03:39 PM
Parts are still available.

johara2320
07-10-2017, 09:20 AM
You have the rubber hose that goes from the plastic intake to the throttle body?

Nickvas81
07-11-2017, 02:01 PM
You have the rubber hose that goes from the plastic intake to the throttle body?

No, sorry.

ZFair
07-16-2017, 06:50 PM
You still got the ka24de cams with dprockets and bolts?

Nickvas81
07-16-2017, 07:28 PM
I don't have the cams, but i do have the sprockets and associated hardware; the guy bought the cams didn't want them.

Ralo
07-16-2017, 07:44 PM
Let me know if your willing to ship. I need that valve cover bad shipped to 19111, thanks.