My SR20 install

[statik]

Over the last couple days me and a few friends dropped my s13 blacktop. We did all the work, and all the wiring. It was not as hard as I imagined, and I thought for our first swap went pretty smooth.

Pics! (http://teamhpi.org/forums/viewtopic.php?p=2)

[mbmbmb23]

Congrats!! Your car is very nice.



-m

[Kid Zelda]

good job biatch

fix the vacuum leaks, get a new BOV, double check timing
:)

[dct223]

damn man.. very nice! hope everything else goes smoothly!

[Muzzy]

damn...u have gobs of room betwen your rad and motor!!!! man u put the motor in the hard way lol...well i think so.

y did u chop your ecu plug off???

[-E-]

congrats :)

[fastpace]

that is pretty cool. I hate the KA also.

[wootwoot]

very nice sir; what manifold is that?

[statik]

Actually the motor went in really easy, it wouldve went really fast if I could see haha. Thats no the ECU plug, thats the power plug near the ECU, it needs to be rewired for the SR harness. The manifold is an XSPower(SSAutochrome) off ebay.

[Columbo]

Heatercore hose location SUCKS on this car, but despite what some people say, you CAN install them with the motor in

THIS IS TRUE!!!!!!!! I found out the hard way also..... bah!!!

O and car looks awsome man!!!

[statik]

BTW here is a run down of the total cost:

S13 Blacktop complete set $2170
IC, piping, BOV(dead =[) $300
New used BOV $60
Manifold / Extension $230
Downpipe Free(birthday)
Test Pipe $50
Cat-Back Free(on the car)
Clutch Free (kind of)
E-Fan $55
MAF $25
Fuel Filter $12
Oil Filter $10

Misc Hoses / Clamps, Bolts, Fluids $150

Total: ~$3060

If i left anything out you can think of ill add it, but seems pretty cheap when some places sell blacktops for 3k shipped. Guess I got lucky...

[statik]

THIS IS TRUE!!!!!!!! I found out the hard way also..... bah!!!

O and car looks awsome man!!!


Thanks alot...man boost is a great feeling when you've never had it =]

[DMC]

wow man looks great, how di dyou figure out how to wire it yourself and install everything?

[statik]

well, installing is easy hoses and bolts hehe, as for wiring check the sr20det faq, theres a link for wiring the s13 into a 95, i used that pretty much.

[crioten]

wheel gap rules!!!!

http://www.teamhpi.org/srSwap/day%202/DSCN1435.JPG

[statik]

she sits pretty low when shes not on jackstands tho =]

[crioten]

she sits pretty low when shes not on jackstands tho =]

haha, i know :)