PDA

View Full Version : 93 240 coupe harness bar


rwpowell015
06-09-2017, 11:12 AM
Trying to get mine setup, not overly sure where to mount it to. It's not as obvious as when I put one in my fc. Can you guys post some pics of where yours are mounted?

Sent from my SM-G900V using Tapatalk

derass
06-09-2017, 02:24 PM
http://lmgtfy.com/?q=240sx+harness+bar

there's one additional step of clicking "images" at the top of the page

rwpowell015
06-09-2017, 02:26 PM
Real helpful...thanks. I wouldn't have posted if I hadn't checked Google and not found what I was after. Have a nice day asshole

Sent from my SM-G900V using Tapatalk

derass
06-09-2017, 02:30 PM
you're right. none of those pictures show how harness bars are mounted in a 240sx.

and it's a good thing you told us exactly which harness bar you're using too. that made it so much easier for us to help you.

/s

feito
06-09-2017, 02:40 PM
If I were you, I would mount it properly the way it is suppose to mounted, that would probably be the safest way.

rwpowell015
06-09-2017, 02:45 PM
Braum harness bar, didn't think it really made that much of a damn difference. Feito you're a damn genius

Sent from my SM-G900V using Tapatalk

KAT-PWR
06-09-2017, 02:52 PM
Rear strut towers

tougefactory
06-09-2017, 02:59 PM
Although, I wouldn't suggest using a harness bar.. Its usually mounted where the factory seat belt placement goes in the B-pillar area. Your going to have to take out the plastic covering from the pillar, and you'll be able to see where it should bolt up to. Pretty straight forward. As for the rods, it mounts all the way at the bottom of the b-pillar. Once you start tearing the interior apart, you'll know where it should mount..

I wouldn't suggest running one, as it can be a safety issue. I would rather mount the harnesses the proper way and use it just like that without the harness bar until you get a full cage.

Hope this helps, if you have any other questions, feel free to DM me.

rwpowell015
06-09-2017, 03:06 PM
Although, I wouldn't suggest using a harness bar.. Its usually mounted where the factory seat belt placement goes in the B-pillar area. Your going to have to take out the plastic covering from the pillar, and you'll be able to see where it should bolt up to. Pretty straight forward. As for the rods, it mounts all the way at the bottom of the b-pillar. Once you start tearing the interior apart, you'll know where it should mount..

I wouldn't suggest running one, as it can be a safety issue. I would rather mount the harnesses the proper way and use it just like that without the harness bar until you get a full cage.

Hope this helps, if you have any other questions, feel free to DM me.
Thanks for giving me a straight answer

Sent from my SM-G900V using Tapatalk

Rustys14
06-09-2017, 06:47 PM
This is one of those things where if you can't figure it out, you probably shouldn't be installing one. Here's a pic of the bar I had in my old missile car awhile back for reference though. Its pretty simple to install and stiffens the car up a bit, but as stated above its best just to get a half cage since your backseat will be just as useless.

http://i1304.photobucket.com/albums/s532/jfox31/IMG_0652_zps3d22802e.jpg (http://s1304.photobucket.com/user/jfox31/media/IMG_0652_zps3d22802e.jpg.html)