MINTY Z32 300ZX Brake Master Cylinder BMC 1 1/16 w. 3 Ports NABCO BM57 JAPAN

[Bernie (NoVA)]

Minty Genuine Nissan BMC
1 1/16 bore - same as I am using on my own S14 w. Evo 9 front & Z32 rear calipers

Fits S13 and S14
Made in Japan

all three ports are open and have AN seats inside.

low miles and very clean
the cap is brand new - replaced it this morning

SOLD

http://www.yugobernie.com/images/Temp/20170531_120810.jpg
http://www.yugobernie.com/images/Temp/20170531_120817.jpg
http://www.yugobernie.com/images/Temp/20170531_120827.jpg
http://www.yugobernie.com/images/Temp/20170531_120843.jpg

[mr.nismo.]

How'd you like the feel? Stock booster? I have my rear z32 and 4 piston cts-v fronts for my s13. Wanted to get an opinion as far as bite and modulation

Sent from my Galaxy S8+ using Tapatalk

[Bernie (NoVA)]

How'd you like the feel? Stock booster? I have my rear z32 and 4 piston cts-v fronts for my s13. Wanted to get an opinion as far as bite and modulation

I am using the thicker dual diaphragm auto booster.
The pedal feel is good, I do not have ABS.

[mr.nismo.]

I am using the thicker dual diaphragm auto booster.
The pedal feel is good, I do not have ABS.
Neither do I, easily to modulate or touchy?

Sent from my Galaxy S8+ using Tapatalk

[Bernie (NoVA)]

Neither do I, easily to modulate or touchy?


I can lock it up if desired but I don't find it touchy or hard to modulate.
Pedal pressure is even and firm.

[nisileighty]

Just curious, how much did this go for?


Sent from my iPhone using Tapatalk