z32 5lug

[SirWarrior]

I found a junked 90NA Z32
So I am getting the 5lug from it
I know that I will need rear spindle/hub/caliper/rotors
But everywhere I see people say to use S14 front spindle/hub. Can I use the front off the 300z????
Or will I just need the rotor/cailper from Z and S14 spindle/hub?

[Muzzy]

lol dude if it were possible i would have already done it. i got a pair of 300ZX fronts in my garage. been sittin in there for over six months!! been tryin to ebay that crap!!! all i wanted from it was the brakes!!

[Flybert]

For the rear, all you need is the rear hub. The spindle, rotor, caliper, etc is not needed unless you want to convert to Z32 rear brakes. I highly recomend getting all of the Z32 hardware back there though. Z32 rear brakes and ebrake assembly is great.

[SirWarrior]

of course i will do z32 all around!!!
For the price I got quoted, it would be a shame not to.
BTW
Are the NA Z32 wheels anything special?? or should i just use them as a beater wheels?

[Muzzy]

TT wheels are better they are like 8s or sometin in the rear

[mrmephistopheles]

TT wheels are 16x8.5 in the rear.

[SirWarrior]

but they dont have a TT, so these will have to do. :P
Don't really care too much about wheels tho, never did.
The only wheels that I really got excited about were the 14x8 that 85GTS Celica had, but they stick out too much, and have smaller hub :(

[mrmephistopheles]

Z32NA rear wheels are 16x7.5, iirc.

[SirWarrior]

still wider than the stock steel wheels :D