ka-t oil kit help

[skatanic28]

im tryin to get a kit for my ka24de and top-mounted t3/t04e. i was gonna go with cheapturbolines.com but they seem to be having trouble lately. if you guys could help me out with this i would appreciate it, i suck at fittings.

http://www.jgstools.com/turbo/index2.html

TA004 48" line w/ std. 1/8" pipe adapter
TA005 18" Length TK028 T3 & T04 flg. $29.99
TA046 1/2" NPT Steel bung $1.99
TK027 T3 & T04 series Inlet- 1/8" NPT

does this look like everything i would need?
the bspt adapter is used between the block and adapter right?, so then how does the stock oil switch fit onto the adapter?
what is used between the turbo inlet and the feed line?

thanks

[andrave]

you'll need a bspt tee into the stock oil pressure hole, and then a bspt to npt adaptor.
from there, you'll need an NPT-AN adaptor (unless you can find bspt to AN, good luck in the US), 4 an hose end, length of feed line, 4 an hose line, an to NPT adaptor, bolt in turbo oil inlet, bolt on turbo outlet, an to NPT adaptor, hose end, oil drain line, hose end, AN to NPT adaptor, NPT bung welded to oil pan.
as long as you got all that you'll be fine.