ECU plug doesnt even have consult wires pinned

[silvia910]

I went to try to hook up my consult cable to my car and realized it wasnt working. After taking a look at my ecu plug, I realized that there arent even any wires pinned into 7, 14, 15, or 23. Why would there be an instance where that wasnt even present?
It's a 92 with a redtop SR, 63 ecu

How should I go about hooking up my consult port? I cut the consult port off from the drivers side to go and splice it into the ecu when I realized there werent even any wires pinned into those slots. I went everywhere in town looking for a place that sold those pins so I can just put pins onto my consult port wires and pin them in myself; but apparently I cant find anywhere that sells the pins. Any suggestions?

[Javi802]

do you have a old harness lying around? If so, just unpin some random wires and and plug them into the sr harness connector. And then splice the consult connector wires in to those

[silvia910]

I don't. And I'm trying to find a better solution that having to go to a pick and pull just to grab a spare ecu connector

[EnnEssEnnKAT]

Interesting..that would really suck to find as you go to get things running. Bet it was removed if those are the right pins.

Sent from mTalk

[silvia910]

Went to the pick n pull and had no luck in finding any spare ecu harnesses or connectors. Grabbed a bunch of random connectors, hoping it I can just depin one and use those pins but none of them came out or were right. Any other suggestions?

[blkvrtswp]

Would this help?
http://www.wiringspecialties.com/2pinconnector.html

Plus some Nissan ECU pins large and small.
http://www.wiringspecialties.com/nissan-ecu-pin-kit/

http://cdn6.bigcommerce.com/s-b03t074/products/937/images/2590/OBD1_Consult_Connector__27604.1442701640.1280.1280 .jpg?c=2

http://cdn6.bigcommerce.com/s-b03t074/products/1514/images/5260/nissan_10_pin__21936.1458932874.1280.1280.jpg?c=2