i know old thread but can get a definitive answer

[nd240sx3]

god damn charcoal canister, i know the two top hoses get plugged but the bottom that goes to gas tank do i let it vent or plug it, and if u might ask why remove it well everyhting is goin or already gone for ka-t swap i want nuthin in the engine bay i definitly dont need so it must go, along with ac,ps and egr which all i did was put block plate on will that be ok thanx

[mjjstang]

ok what I did, is remove the whole hard line, It ends at around the firewall, If you want to explore removing the second hard line, do so, i dont know much bout it but I removed the front hard line and kept the rubber hose, ill prolly mount it so it vents to the back, i donno if its bad to let it vent there, I just wont smoke under my car is all.

[nd240sx3]

i ran it to that elbow tha goes into the frame rail under charcoal can. the big line under canister well i cut metal line alil short and ran it to the elbo so the fumes go into the frame rail but thanx hope this helps out

[projectRDM]

You're both right, make sure it's vented.

[Phlip]

You're both right, make sure it's vented.
Coming from the man who DEMANDS that everyone he meets that still HAS that canister remove it no sooner than immediately, giving concise directions... I'm almost scared to show you the new car dude