racepar1
01-20-2017, 11:05 PM
Redtop SR head
This is a redtop SR20DET head, for sure not N/A. The head is incomplete and comes as pictured. One cam cap is missing and a bunch of bolts for the caps are missing. No valves or anything else are included. The head does have some damage, but can be repaired/used. The #1 exhaust cam journal is scored. It's not terrible and might be useable if you smooth out the rough edges/burrs, but I would recommend you look into repairing it. One of the stud holes for the timing chain tensioner has also been damaged. It will need to be welded up and re-drilled. The head is otherwise clean and is absolutely salvageable.
SOLD!
Oil Pan Stuff
-Upper Pans- SOLD!
-Lower Pan- SOLD!
-Baffle Plates (surface rust)- $10ea (pan baffle sold, girdle baffle available)
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3348_zpsbksoagdd.jpg
Turbo
-Stock Redtop Charge Flange- $10
-Turbo Lines (one dented, useable)- $15
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3345_zpsuabpalay.jpg
Girdle/Main Caps
-Set (girdle W/Mains)- one SOLD, one available
-Girdle- $25
-Main Cap Set- $25
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3347_zpst61tbv5i.jpg
Intake, Cooling, ETC...
-Plentum- $10
-Water Pump Pulley- $10
-Rear Crank Housings- $15ea
-Coolant Temp Housing (W/Sensors & Subharness)- $30
-Thermostat Housing Assemblies- $20ea
-Oil Dipstick Tube- $10
-Water Pipes (1 cut, 1 bent)- $10ea
-Water Outlet- SOLD!
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3344_zpsdbvrsodp.jpg
Misc Engine
-Valvecover Stud Set- $15
-Oil Drain Fitting (dented a little)- $5
-Timing Chain Guide Bolt Set (little rusty)- $10
-Oil Pump Drive Gears- $10ea
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3343_zps3ofxyjt8.jpg
Brackets
-COMPLETE P/S and Alt brackets- $20ea (Power Steering SOLD!)
-Alternator to Block Bracket- $10
-ALL Other Brackets- $5ea (Engine Mount Brackets SOLD!)
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3349_zpshhypmtcu.jpg
This is a redtop SR20DET head, for sure not N/A. The head is incomplete and comes as pictured. One cam cap is missing and a bunch of bolts for the caps are missing. No valves or anything else are included. The head does have some damage, but can be repaired/used. The #1 exhaust cam journal is scored. It's not terrible and might be useable if you smooth out the rough edges/burrs, but I would recommend you look into repairing it. One of the stud holes for the timing chain tensioner has also been damaged. It will need to be welded up and re-drilled. The head is otherwise clean and is absolutely salvageable.
SOLD!
Oil Pan Stuff
-Upper Pans- SOLD!
-Lower Pan- SOLD!
-Baffle Plates (surface rust)- $10ea (pan baffle sold, girdle baffle available)
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3348_zpsbksoagdd.jpg
Turbo
-Stock Redtop Charge Flange- $10
-Turbo Lines (one dented, useable)- $15
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3345_zpsuabpalay.jpg
Girdle/Main Caps
-Set (girdle W/Mains)- one SOLD, one available
-Girdle- $25
-Main Cap Set- $25
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3347_zpst61tbv5i.jpg
Intake, Cooling, ETC...
-Plentum- $10
-Water Pump Pulley- $10
-Rear Crank Housings- $15ea
-Coolant Temp Housing (W/Sensors & Subharness)- $30
-Thermostat Housing Assemblies- $20ea
-Oil Dipstick Tube- $10
-Water Pipes (1 cut, 1 bent)- $10ea
-Water Outlet- SOLD!
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3344_zpsdbvrsodp.jpg
Misc Engine
-Valvecover Stud Set- $15
-Oil Drain Fitting (dented a little)- $5
-Timing Chain Guide Bolt Set (little rusty)- $10
-Oil Pump Drive Gears- $10ea
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3343_zps3ofxyjt8.jpg
Brackets
-COMPLETE P/S and Alt brackets- $20ea (Power Steering SOLD!)
-Alternator to Block Bracket- $10
-ALL Other Brackets- $5ea (Engine Mount Brackets SOLD!)
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3349_zpshhypmtcu.jpg