racepar1
01-15-2017, 09:28 PM
CXracing SR tubular exhaust mani
This is a CXracing equal length tubular exhaust mani for an SR20det. The mani is used, but is in good shape, no cracks or dents. The support bracket is missing as are the studs. The mani is actually surprisingly sturdy as well.
$40
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3252_zpsqka9mo8v.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3253_zpshyme5lh8.jpg
S13 mid-pipe
This is an aftermarket, mandrel bent, 3" S13 mid-pipe. Both flanges and the bracket are un-damaged. As you can see in the pics it was worn through in the bend section due to low car/shitty exhaust alignment. This would be perfect for someone looking to build a blast pipe setup as half the exhaust is already built. Just cut off the damaged section and build the rear.
$40
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3299_zpsl3amexqc.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3300_zpsgpx1sqoz.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3301_zpsypqc1qik.jpg
Stock M/T trans mounts
I have 2 stock s13 or s14 manual transmission mounts that are in extremely good shape. There is extremely little surface cracking, no rips or separations anywhere. Both are OEM mounts, not aftermarket.
$15 each
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3303_zps7nv3ane0.jpg
This is a CXracing equal length tubular exhaust mani for an SR20det. The mani is used, but is in good shape, no cracks or dents. The support bracket is missing as are the studs. The mani is actually surprisingly sturdy as well.
$40
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3252_zpsqka9mo8v.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3253_zpshyme5lh8.jpg
S13 mid-pipe
This is an aftermarket, mandrel bent, 3" S13 mid-pipe. Both flanges and the bracket are un-damaged. As you can see in the pics it was worn through in the bend section due to low car/shitty exhaust alignment. This would be perfect for someone looking to build a blast pipe setup as half the exhaust is already built. Just cut off the damaged section and build the rear.
$40
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3299_zpsl3amexqc.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3300_zpsgpx1sqoz.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3301_zpsypqc1qik.jpg
Stock M/T trans mounts
I have 2 stock s13 or s14 manual transmission mounts that are in extremely good shape. There is extremely little surface cracking, no rips or separations anywhere. Both are OEM mounts, not aftermarket.
$15 each
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3303_zps7nv3ane0.jpg