PDA

View Full Version : SR20det no start!

Bcombs14
11-26-2016, 06:32 PM
I'm stumped, I could use all the info I can get. Car has spark and injectors fire when I turn the CAS by hand but when it's installed the spark is not noticeable and the injectors will not fire. Yes I am timing it right and have tested other CAS and ECU's. It's like the block is grounding out the signal once the CAS is installed.


Sent from my iPhone using Tapatalk
AwhiteS13
12-01-2016, 03:42 PM
If you are confident in those findings then you need to check the harness. Pin-outs for the cas can be found easily online.
Bcombs14
12-01-2016, 03:58 PM
If you are confident in those findings then you need to check the harness. Pin-outs for the cas can be found easily online.



I appreciate the reply, I have pinned out the CAS to the ecu, all of them have continuity, and the power to it is receiving 1.7v.


Sent from my iPhone using Tapatalk