keytops
10-31-2016, 08:03 AM
Selling a BNIB never registered AEM infinity 6 (30-7106-$1400) standalone ECU. For anyone looking to make big power and enjoy all the features of high end ecu at a reasonable price this deal is for you. I'm selling this ECU along with the connector it needs($65) with the pins to populate said connector and the KA CAS disk ($32).
This computer is not plug and play but the only thing you need is a $30 molex pin crimprer and a connector pinout for your car. When you go to configure the ECU for your engine and coils etc. you can print the pin-out for the ecu connector showing where all the pins go. There's only around 30 wires you will need to get up and running. A few power wires will also need to be supplied with fused key switch power that was previously done through the factory computer. The CAS disk is needed to use any aftermarket ecu on a KA. The only things you may need is a MAP sensor if you plan to eliminate the MAF.
$1220 Shipped for everything. Subtract $20 if you don't need the CAS disk.
This computer is not plug and play but the only thing you need is a $30 molex pin crimprer and a connector pinout for your car. When you go to configure the ECU for your engine and coils etc. you can print the pin-out for the ecu connector showing where all the pins go. There's only around 30 wires you will need to get up and running. A few power wires will also need to be supplied with fused key switch power that was previously done through the factory computer. The CAS disk is needed to use any aftermarket ecu on a KA. The only things you may need is a MAP sensor if you plan to eliminate the MAF.
$1220 Shipped for everything. Subtract $20 if you don't need the CAS disk.