Pimpnyou204
10-17-2016, 01:08 PM
Have a few KA24DE pieces for sale. Everything is best offer but in no rush to sell. Located in south florida.
350- KA block I was going to use, had it bored and honed to .20 pistons. All machine work done by TotalEngine Concepts in Riviera Beach. Completely ready to go just needs pistons and hardware. I have the crank for it (2 actually) I will include (1). And that aswell was done at TEC.
85- Stock KA crank machined and checked by TEC
85- Stock S13 Camshafts, from my understanding these were purchased new from Nissan and installed for 1000 miles. Pulled working and checked at TEC.
250- ISR RS3871 Turbo purchased from enjuku was used for maybe 1000 miles if that. Zero shaft play at all.
85- ISR bottom mount turbo manifold used with the turbo from above
150- RS Enthalpy tune for 750 injectors and z32 MAF, from my understanding if you return one of his units you can retune for ($100?)
85- Z32 MAF with cone. Used but pulled from same running car.
80- Front bumper picked up to avoid being harassed. Painted BMW Crimson Red. Was pretty beat up when I got it, filled most of it including Nissan logo and groves in it. Been sitting outside not the best bumper but it is one color and I am including the matching turning lights bulbs and harness. Also tried to take off the front mount support but it was rusted so a piece broke off.
20- Stock KA flywheel no clue how long its been used but looks fine
55- KA A/C system lines and compressor. One line I believe has a small hole in it the compressor for some reason when kicked on will spin the connecting wires. Im sure its something silly.
25- KA tranny crossmember
150 block
80 crank
189 new isr turbo manifold
579 new isr rs3871 turbo
499 new rs enthalpy tune
http://i32.photobucket.com/albums/d49/pimpnyou204/240%20parts/IMG_0368_zpslaajhbk2.jpg
http://i32.photobucket.com/albums/d49/pimpnyou204/240%20parts/IMG_0592_zps0utlsqwm.jpg
http://i32.photobucket.com/albums/d49/pimpnyou204/240%20parts/IMG_0589_zpsfyswbgim.jpg
http://i32.photobucket.com/albums/d49/pimpnyou204/240%20parts/IMG_0590_zpsy42fualr.jpg
350- KA block I was going to use, had it bored and honed to .20 pistons. All machine work done by TotalEngine Concepts in Riviera Beach. Completely ready to go just needs pistons and hardware. I have the crank for it (2 actually) I will include (1). And that aswell was done at TEC.
85- Stock KA crank machined and checked by TEC
85- Stock S13 Camshafts, from my understanding these were purchased new from Nissan and installed for 1000 miles. Pulled working and checked at TEC.
250- ISR RS3871 Turbo purchased from enjuku was used for maybe 1000 miles if that. Zero shaft play at all.
85- ISR bottom mount turbo manifold used with the turbo from above
150- RS Enthalpy tune for 750 injectors and z32 MAF, from my understanding if you return one of his units you can retune for ($100?)
85- Z32 MAF with cone. Used but pulled from same running car.
80- Front bumper picked up to avoid being harassed. Painted BMW Crimson Red. Was pretty beat up when I got it, filled most of it including Nissan logo and groves in it. Been sitting outside not the best bumper but it is one color and I am including the matching turning lights bulbs and harness. Also tried to take off the front mount support but it was rusted so a piece broke off.
20- Stock KA flywheel no clue how long its been used but looks fine
55- KA A/C system lines and compressor. One line I believe has a small hole in it the compressor for some reason when kicked on will spin the connecting wires. Im sure its something silly.
25- KA tranny crossmember
150 block
80 crank
189 new isr turbo manifold
579 new isr rs3871 turbo
499 new rs enthalpy tune
http://i32.photobucket.com/albums/d49/pimpnyou204/240%20parts/IMG_0368_zpslaajhbk2.jpg
http://i32.photobucket.com/albums/d49/pimpnyou204/240%20parts/IMG_0592_zps0utlsqwm.jpg
http://i32.photobucket.com/albums/d49/pimpnyou204/240%20parts/IMG_0589_zpsfyswbgim.jpg
http://i32.photobucket.com/albums/d49/pimpnyou204/240%20parts/IMG_0590_zpsy42fualr.jpg