PDA

View Full Version : CA FS: Brand new BHJ Torque plate for SR20

hydra
04-07-2016, 10:01 AM
I have a brand new, never used SR20DET torque plate from BHJ. These retail for over $600. I will sell this for 350 shipped. This is a must for any high-performance SR20 build... Please PM or email for quickest response.


http://zilvia.net/f/attachment.php?attachmentid=77986&d=1415495090
hydra
04-09-2016, 09:18 AM
weekend bump!
hydra
04-16-2016, 03:31 AM
Price dropped to 350
hydra
04-19-2016, 12:27 PM
mid week bump!
hydra
06-06-2016, 03:54 AM
to the top
hydra
06-12-2016, 07:57 AM
weekend bump!
hydra
06-19-2016, 11:10 AM
weekend bump!
Yellow4g63
06-19-2016, 04:44 PM
whats the bore size?
hydra
06-20-2016, 05:24 AM
87mm if I remember correctly
sr20time
06-20-2016, 10:36 PM
ill give you 150...
brndck
06-20-2016, 11:34 PM
ill give you 150...

Why do people even bother with dickhead shit like this?
:picardfp::picardfp::picardfp::picardfp::picardfp:
hydra
06-21-2016, 12:44 AM
ill give you 150...


And I will take your 150...


Just don't expect me to send you anything in return :mrmeph:
hanzbrady
06-21-2016, 06:47 AM
If it's a proper torque plate it should be 91mm. That's the size that we make ours to since torque plates are commonly used on sleeved blocks that exceed 87mm. I'd check it to be sure.
brndck
06-21-2016, 01:38 PM
If it's a proper torque plate it should be 91mm. That's the size that we make ours to since torque plates are commonly used on sleeved blocks that exceed 87mm. I'd check it to be sure.

They could easily bore it out to 90+
GoodShow
06-21-2016, 06:25 PM
wHERE IN SO CAL? I will give you 300 picked up!
GoodShow
06-22-2016, 11:11 AM
Ive pmed you about purchasing this. I am a serious buyer. Not low balling you. please respond to my dm or text me at your earliest convenience
djtoonjr
06-22-2016, 12:24 PM
Bump for legit seller.