wiring help: Sr20 Notch top into S14

[Sr20Crazy]

I've been searching for wiring help on a notch top engine into a s14 chassis but can't find anything or post was too old that the photos does not exist. but as of right now, on my lower harness, I have two plug that is suppose to plug into the main fuse box not matching up. my KA harness have a different oil pressure sensor plug. so i wasn't able to use that.

http://s19.postimg.org/7vy1ubalf/IMG_0606.jpg
-two upper plug are the SR jdm harness, the bottom is the KA harness


http://s19.postimg.org/nswtr12zn/IMG_0607.jpg
-the two lower on is the plug coming out of my fues box.

any help is appreciated.

[Darkcr3w]

Hopefully someone responds quick with good knowledge. If you get fed up though I'm selling a wiring specialties harness for an S14 SR into S14 chassis


Sent from my iPhone using Tapatalk

[Kingtal0n]

You use the KA lower harness from your old KA engine on the sr20det

nobody needs a special lower harness unless they are relocating or wire tucking/updating plugs

[mewantkouki]

Starter plug is different.

[rawgarage]

Just sell all that and buy a clean ass WS Harness

[zombiewolf513]

Do you have the SR trans harness? That should work just fine IIRC