tunermt
02-04-2016, 09:26 AM
I do a lot of Etunes for customers all over the world and wanted to share a little DIY video of exactly how to correctly setup/sync the ignition timing on the new AEM Infinity engine management systems (http://brewedmotors.com/aem-infinity-6-ems-30-7106) (infinity 6, 8H, 8, 10 and 12 all use the exact same sync process.)
Check out the Blog Learn to Tune AEM Infinity like a pro (http://brewedmotors.com/blog/aem-infinity-tuning-ignition-sync.html) for a full step by step process and explanation behind exactly why you always need to sync ignition timing before you start tuning.
You will need a timing light to perform this task and it will help to have an extra set of hands/eyes to work the timing light at the engine. (It is possible to do this alone but you will need a long USB cable so you can be connected to the Infinity/view the screen/key board and use the timing light at the engine.
BDks4UNeQaU
Check out the Blog Learn to Tune AEM Infinity like a pro (http://brewedmotors.com/blog/aem-infinity-tuning-ignition-sync.html) for a full step by step process and explanation behind exactly why you always need to sync ignition timing before you start tuning.
You will need a timing light to perform this task and it will help to have an extra set of hands/eyes to work the timing light at the engine. (It is possible to do this alone but you will need a long USB cable so you can be connected to the Infinity/view the screen/key board and use the timing light at the engine.
BDks4UNeQaU