S14_ZX10R
12-24-2015, 04:00 PM
SR THE BUILT SR20DET (TURBO IS SOLD)
ALSO LOOKING FOR S14/S13 SHELLS FOR TRADE
Selling a built s13 blacktop sr20det.!!!.. take everything as one bundle package for $3300.00 still in the car...150 PSI Across all four engine was broken in with zero miles on the dyno with torco break in oil and tuned by koji @ driftspeed/Auto talent all at once..planning to go bigger!! Everything was balanced and blueprinted as one unit even the flywheel!! nothing was cheaped out during this build!! NOTHING! All good quality parts! over all fastest response please call/text
NOTE: not a track motor!! was rarely abused! i baby this thing.. Most of the miles are highway miles from traveling to car meets..my weekend car!
miles on motor: 5000 currently on engine
Power: 420rwhp with 330rwtq @21psi
http://imageshack.com/a/img856/3879/5hou.jpg
HEAD:
-hks 264 cams 540$
-hks valve springs 280$
-BC titanium retainers 110$
-Polished freddy 350$
-SARD 850cc sidefeed injectors 600$
-Arp Head studs 135$
-Greddy RAS 80$
-Ferrara racing valves
BLOCK:
-86.5 je asymmetrical pistons 550$
-eagle rods 379$
-ACL race coated bearings 80$
-cosworth head gasket 220$
-H&H custom Exhaust manifold ceramic coated 880$
-H&H custom down pipe ceramic coated 350$
-Garrett gt3076r ball bearing turbo 1400$-sold
-Dif oil and water lines 150$
-greddy stlyle oil pan 120$
-turbonetics 38mm wastegate 180 $
-Nissan quest alternator and bracket kit 350$
DRIVE TRAIN:
-Stage three 6puck unsprun 560$
-act light weight flywheel 350$
-excessive Z32 transmission kit Adapter plate, starter $1500 value
-5 speed manual
ELECTRONICS:
-apexi power fc d-jetro 1280$
if u add it all up its a fair price.. save u about 1200$ and i didnt include labor and tuning!! im losing out on a good chunk of money ... also will come with wiring specialties engine and lower harness open to additional offers let me know..
build was done by christian over at SP-Engineering
fastest response/more images/info please call/text 909-965-881
images:
http://imageshack.com/a/img27/5752/kv17.jpg
http://imageshack.com/a/img855/5954/wll8.jpg
http://imageshack.com/a/img713/6603/mqby.jpg
http://imageshack.com/a/img22/2473/nx5q.jpg
http://imageshack.com/a/img513/2254/tpkp.jpg
http://imageshack.com/a/img843/4882/o7xp.jpg
http://imageshack.com/a/img713/92/ih06.jpg
http://imageshack.com/a/img401/8623/fcoi.jpg
http://imageshack.com/a/img42/9454/a1m1.jpg
http://imageshack.com/a/img28/8775/glq0.jpg
http://imageshack.com/a/img811/6935/q4ap.jpg
http://imageshack.com/a/img841/7181/eunu.jpg
Last edited by z3nk-3; 04-02-2014 at 05:52 PM.. Reason: add more stuff typo
Sent from my iPhone using Tapatalk
ALSO LOOKING FOR S14/S13 SHELLS FOR TRADE
Selling a built s13 blacktop sr20det.!!!.. take everything as one bundle package for $3300.00 still in the car...150 PSI Across all four engine was broken in with zero miles on the dyno with torco break in oil and tuned by koji @ driftspeed/Auto talent all at once..planning to go bigger!! Everything was balanced and blueprinted as one unit even the flywheel!! nothing was cheaped out during this build!! NOTHING! All good quality parts! over all fastest response please call/text
NOTE: not a track motor!! was rarely abused! i baby this thing.. Most of the miles are highway miles from traveling to car meets..my weekend car!
miles on motor: 5000 currently on engine
Power: 420rwhp with 330rwtq @21psi
http://imageshack.com/a/img856/3879/5hou.jpg
HEAD:
-hks 264 cams 540$
-hks valve springs 280$
-BC titanium retainers 110$
-Polished freddy 350$
-SARD 850cc sidefeed injectors 600$
-Arp Head studs 135$
-Greddy RAS 80$
-Ferrara racing valves
BLOCK:
-86.5 je asymmetrical pistons 550$
-eagle rods 379$
-ACL race coated bearings 80$
-cosworth head gasket 220$
-H&H custom Exhaust manifold ceramic coated 880$
-H&H custom down pipe ceramic coated 350$
-Garrett gt3076r ball bearing turbo 1400$-sold
-Dif oil and water lines 150$
-greddy stlyle oil pan 120$
-turbonetics 38mm wastegate 180 $
-Nissan quest alternator and bracket kit 350$
DRIVE TRAIN:
-Stage three 6puck unsprun 560$
-act light weight flywheel 350$
-excessive Z32 transmission kit Adapter plate, starter $1500 value
-5 speed manual
ELECTRONICS:
-apexi power fc d-jetro 1280$
if u add it all up its a fair price.. save u about 1200$ and i didnt include labor and tuning!! im losing out on a good chunk of money ... also will come with wiring specialties engine and lower harness open to additional offers let me know..
build was done by christian over at SP-Engineering
fastest response/more images/info please call/text 909-965-881
images:
http://imageshack.com/a/img27/5752/kv17.jpg
http://imageshack.com/a/img855/5954/wll8.jpg
http://imageshack.com/a/img713/6603/mqby.jpg
http://imageshack.com/a/img22/2473/nx5q.jpg
http://imageshack.com/a/img513/2254/tpkp.jpg
http://imageshack.com/a/img843/4882/o7xp.jpg
http://imageshack.com/a/img713/92/ih06.jpg
http://imageshack.com/a/img401/8623/fcoi.jpg
http://imageshack.com/a/img42/9454/a1m1.jpg
http://imageshack.com/a/img28/8775/glq0.jpg
http://imageshack.com/a/img811/6935/q4ap.jpg
http://imageshack.com/a/img841/7181/eunu.jpg
Last edited by z3nk-3; 04-02-2014 at 05:52 PM.. Reason: add more stuff typo
Sent from my iPhone using Tapatalk