Log in

View Full Version : Bottom End Rebuild Help/Tuning Online/ATL Area


samdamanzo
12-19-2015, 03:46 PM
So bought a 240 the other day, drove it for a couple days, and shortly after was reminded what I had bought. Car needed a tune so bad it blew a ring, or so I hope. Long story short, I'm rebuilding it now. I'm in the Atlanta area and there is no way I will be doing the labor myself, as much as I'd like to learn, I need it back on the road and reliable.

So now to my questions, do I need to tow my car to a "JDM" shop in atlanta that is familiar with the motors and pay $1000 more, or is the local guy I went to back when I had my Infiniti good enough. The local guy has worked on everything, from ls motors to the regular old ford and chevy truck motors, Subaru motors, rx-8 rotarys, and even has a z31 he owns and is rebuilding, but has never had an SR20DET specifically. I've seen his work and its great, but if the motors are super peculiar I'd rather go with someone in Atlanta who has built a million of them. My main goal in this build is to have it running as reliable as possible, but the second biggest factor is keeping the cost down (I know they contradict one another). Obviously the guys in Atlanta who have built them before will build it more reliable, but to an extent worth the extra $1k?

Also, who would you guys recommend for a tune? I'll have the ecu shipped off right after the rebuild if I go with RS Enthalpy or another tuner like this, but anyone in the Atlanta area feel free to suggest somewhere where I can get he on a dyno, or even another tuner through the internet. Again, this is very important as it was what blew the car up and reliability is my first concern.

Any feedback is appreciated. Thanks for taking your time to help me out guys.

kashira kureijii
12-19-2015, 07:28 PM
Rebuild it yoself scrub!

samdamanzo
12-19-2015, 07:39 PM
Love to, but don't have the experience and don't wanna fuck it up even worse.

kashira kureijii
12-19-2015, 07:57 PM
learn bruh, no one will respect you and you won't be a true enthusiast if you don't.
its a real man skill bruh :cj:
at least manage to watch the person you have build it

Gar9854
12-19-2015, 08:57 PM
If kurtis or sam is rebuilding it you're in very good hands.

jedi03
12-19-2015, 10:20 PM
Lol I really like the ridiculousness! Rebuilding is easy just have a reputable machine shop guide you! Your other guy should be ok if you trust him, don't cheapskate tho and get new all throughout!

Croustibat
12-20-2015, 03:41 AM
You are right in getting someone do the job. As far as the tune goes, people who build engines can usually tune them.

First thing first is finding why it blew. Stock engine won't blow its ringlands because it has a stock tune, but it will if the fuel pump is dying or the CAS is not set correctly.

Kingtal0n
12-20-2015, 07:40 AM
The SR is difficult to build, even for experienced machines shops.

SRs that built and failed quick

http://zilvia.net/f/showthread.php?t=535520


http://zilvia.net/f/showthread.php?t=569861

http://zilvia.net/f/showthread.php?p=5765974

http://zilvia.net/f/showthread.php?t=579996

http://zilvia.net/f/showthread.php?t=586960


http://zilvia.net/f/showthread.php?t=415523&page=2

http://zilvia.net/f/showthread.php?p=5951668#post5951668

they all failed for different reasons. And you won't be getting your money back either.