Picture of DOHC Powersteering Setup?

[Arrowking]

Can someone help me out and post a picture of the DOHC power steering system near the rack? I'm converting from a SOHC setup to a DOHC for a SR swap. I have the DOHC loop but I need a diagram to plumb everything up. Checked the FSM and there was no diagram (would help a lot if someone has a factory diagram or something) only troubleshooting and rebuilding steps.

I'm tempted to go AN everything but I would like to have it running in a couple weeks and don't want to wait on more parts to come in.

Thanks in advance!

[Arrowking]

Anything? Also pictures of the OEM washer bottle setup would be appreciated. I think I got it but would like an OEM setup verification.

[AnonymousBlackX]

me too watching this thred

[kashira kureijii]

http://i1297.photobucket.com/albums/ag23/neko-romancer95/ka24e_powersteeringlinediag_zpsamk1kjkc.jpg (http://s1297.photobucket.com/user/neko-romancer95/media/ka24e_powersteeringlinediag_zpsamk1kjkc.jpg.html)
http://i1297.photobucket.com/albums/ag23/neko-romancer95/ka24de_powersteeringhosediag_zpstbs9ustf.jpg (http://s1297.photobucket.com/user/neko-romancer95/media/ka24de_powersteeringhosediag_zpstbs9ustf.jpg.html)

here from da googles

anyway, the best way is probably to just find some dohc lines, when I converted my sohc, I made this jank ass pressure hose extension with a hydraulic hose maker and ran it around, might have done the same for the return line, I don't remember

[Arrowking]

here from da googles

anyway, the best way is probably to just find some dohc lines, when I converted my sohc, I made this jank ass pressure hose extension with a hydraulic hose maker and ran it around, might have done the same for the return line, I don't remember

I saw that diagram already and was hoping for a clearer representation. I do have the cooling loop that sits in front of the crossmember and the hose with the banjo fitting that goes from the pump that terminates in the sensor, but I just need to make sure I plumb it all up correctly.

EDIT: Nevermind, I think I have it now. Thanks!

[kashira kureijii]

I saw that diagram already and was hoping for a clearer representation. I do have the cooling loop that sits in front of the crossmember and the hose with the banjo fitting that goes from the pump that terminates in the sensor, but I just need to make sure I plumb it all up correctly.

EDIT: Nevermind, I think I have it now. Thanks!

good, it isn't really super complicated, there's not much to mix up, its just 2 hoses and the one that like cools it.

good luck :)

[Arrowking]

good, it isn't really super complicated, there's not much to mix up, its just 2 hoses and the one that like cools it.

good luck :)

I think I was just overcomplicating it, but I really appreciate your help! I guess it's one of those things where you need to not look at it awhile and come back fresh.