View Full Version : P2M Upgraded Nissan S13 S14 SR20DET Ignition Coil Packs Now Released!
phase2
12-15-2015, 02:42 PM
P2M Nissan S13 S14 SR20DET (RWD) ignition coil pack set is a direct replacement over the factory unit with the following improved features:
- Strictly produced via TS16949 certified manufacturing facility
- Top quality high insulation expoxy
- Top quality high voltage di-electric resistant resin
- 15% stronger spark output than factory unit
- Increased winding and improved iron core
- Dyno proven performance (+4rwhp / +5 ft lbs torque peak to peak)
- Compatible with all aftermarket ignition box upgrade
** Dyno graph based on stock S13 SR20DET running stock 8-9psi (0.6bar)
http://www.phase2motortrend.com/v/vspfiles/photos/P2-ICP50F01-TT-2T.jpg
http://www.phase2motortrend.com/v/vspfiles/photos/P2-ICP50F01-TT-6T.jpg
Can be ordered directly through our website or any P2M product distributors:
http://www.phase2motortrend.com/product-p/p2-icp50f01-tt.htm
dorkidori_s13
12-15-2015, 07:23 PM
count on me ordering a set of these soon! i am quite pleased with your throttle body velocity stack ring and the difference it made along with your side feed fuel rail (especially how nicely it installed). i look forward to running these in the near future!
battery1882
12-15-2015, 07:40 PM
Is that price for all 4?
fatduece
12-15-2015, 07:43 PM
Very nice, but pricey. How does it compare to the splitfire?
http://www.frsport.com/DIS-004-Direct-Ignition-Upgraded-Coil-Packs-S13-S14-SR20DET_p_1375.html?gclid=CMzHxIOp38kCFUWVfgodzlcM 9A
phase2
12-15-2015, 07:44 PM
Is that price for all 4?
Yes price is for a set of 4pcs
Sent from my SM-G928T using Tapatalk
phase2
12-15-2015, 07:45 PM
count on me ordering a set of these soon! i am quite pleased with your throttle body velocity stack ring and the difference it made along with your side feed fuel rail (especially how nicely it installed). i look forward to running these in the near future!
Thank you for your support [emoji1]
Sent from my SM-G928T using Tapatalk
phase2
12-15-2015, 07:49 PM
Very nice, but pricey. How does it compare to the splitfire?
http://www.frsport.com/DIS-004-Direct-Ignition-Upgraded-Coil-Packs-S13-S14-SR20DET_p_1375.html?gclid=CMzHxIOp38kCFUWVfgodzlcM 9A
These are priced 1/3 from Splitfire price as far as I can see. Mainly these serve as OE replacement and an upgrade for people looking to replace their bad coils but instead of shelling out 60-70 bucks for a Genuine stock unit, you get to replace all four with an upgrade.
Watch our release of our stage two ignition upgrade amplifier box next year 2016, it will work nicely with our existing coil packs and still end up cheaper than Splitfires.
The stage two ignition box will be plug and play with Wiring Specialties built Pro harness. [emoji106]
Sent from my SM-G928T using Tapatalk
dorkidori_s13
12-15-2015, 08:43 PM
quick question, will you sell singles of these incase one burns up? (that common problem that plagued Splitfires)
phase2
12-15-2015, 08:45 PM
quick question, will you sell singles of these incase one burns up? (that common problem that plagued Splitfires)
Ofcourse we can, but this product is backed by our lifetime warranty we will replace the coils if they happen to burn out.
Sent from my SM-G928T using Tapatalk
economix
12-16-2015, 06:11 AM
Ofcourse we can, but this product is backed by our lifetime warranty we will replace the coils if they happen to burn out.
Between the price, increased performance, and lifetime warranty, I don't think I have a reason to buy from another vendor. You guys made this a totally awesome offering!
vipergtsr1000hp
12-16-2015, 06:19 AM
Dang my splitfire coilpacks just came in this past week...Why couldnt this be out earlier lol. Also, thumbs up for the great prices and products you guys offer. :)
fatduece
12-16-2015, 09:27 AM
These are priced 1/3 from Splitfire price as far as I can see. Mainly these serve as OE replacement and an upgrade for people looking to replace their bad coils but instead of shelling out 60-70 bucks for a Genuine stock unit, you get to replace all four with an upgrade.
Watch our release of our stage two ignition upgrade amplifier box next year 2016, it will work nicely with our existing coil packs and still end up cheaper than Splitfires.
The stage two ignition box will be plug and play with Wiring Specialties built Pro harness. [emoji106]
Sent from my SM-G928T using TapatalkI see. Thanks for responding
punkzdriver
12-16-2015, 03:14 PM
Will these work on a VVL head?
RalliartRsX
12-16-2015, 03:18 PM
Will these work on a VVL head?
Unfortunately, these will not
SR20DETsilvia
12-20-2015, 08:16 PM
Have you tested these with any sort of ignition amplifier? I'm currently running the HKS Twin Power on my SR with stock coil packs, haven't had an issue but these seem a little "fresher" and wouldn't mind ordering/installing these more for piece of mind.
phase2
12-20-2015, 10:59 PM
Have you tested these with any sort of ignition amplifier? I'm currently running the HKS Twin Power on my SR with stock coil packs, haven't had an issue but these seem a little "fresher" and wouldn't mind ordering/installing these more for piece of mind.
Our P2M upgraded coil packs will work with all aftermarket ignition amplifier. The iron core and coil has also been improved so in essence they are actually stronger than stock in terms of reliability.
We will also be releasing our P2M plug and play amplifier for 2016 year which will work with our coil packs and stock coil packs, and will offer another ignition combo package for the amplifier + P2M coil packs combined.
Dboyizmlg
12-20-2015, 11:19 PM
Again, great products from Phase 2.
Quality, price, and lifetime warranty!!!
Will this be fine to use for people that already have Rom tune, PFC, standalone, etc. ?
No need for retune, I'm guessing?
phase2
12-20-2015, 11:54 PM
Again, great products from Phase 2.
Quality, price, and lifetime warranty!!!
Will this be fine to use for people that already have Rom tune, PFC, standalone, etc. ?
No need for retune, I'm guessing?
No need for retune, maximize the ignition performance from your existing setup. :)
fatduece
12-21-2015, 09:23 AM
Wait...so it's $126 for 4 coil packs? I thought it was $126 For one coil pack.
phase2
12-21-2015, 03:36 PM
Wait...so it's $126 for 4 coil packs? I thought it was $126 For one coil pack.
Price is a set of 4 pcs.
fatduece
12-21-2015, 09:01 PM
Damn that's dirt cheap!
phase2
12-21-2015, 09:11 PM
Damn that's dirt cheap!
I guess we should mark it up higher then. :naughty:
fatduece
12-21-2015, 09:17 PM
Haha! Good thing im about to complete my order.
phase2
12-21-2015, 09:44 PM
I think your order just came in. We will have it ship out tomorrow, thanks for your support. :)
fatduece
12-22-2015, 05:27 PM
Nice! Thank you for making parts for our old cars.
phase2
12-22-2015, 07:08 PM
Nice! Thank you for making parts for our old cars.
More is coming for 2016. :naughty:
phase2
02-03-2016, 03:55 AM
Good bump
Sent from my SM-G928T using Tapatalk
drumnbasslvr
03-28-2016, 03:29 PM
what do these ignition coil packs ohm out to as opposed to factory units? any info on dwell you can provide? where are they made? can they take the heat of drifting at 20psi? reviews and knowledge of this parts existence are lacking with its new item status. give us all a warm fuzzy about it and let the product go into back order for popularity sake.
phase2
03-29-2016, 06:23 AM
The coil packs were built within the same OHM as stock, however the increased in spark energy and consistency comes within the improved coil pack iron core inside the coil pack. The improvement is consistent spark performance over the weaker factory OEM Nissan coil pack which improves torque and HP power curve.
We've yet to come across any heat issue, but with our life time warranty for P2M products we got you covered if anything goes wrong.
ProjectPanda13
04-03-2016, 09:34 PM
http://uploads.tapatalk-cdn.com/20160404/02bf3b1339bc8c9ee4dd9e21e5fbd873.jpg
Just installed a set of these on my motor
Quality product and looks awesome.
Latez
phase2
04-05-2016, 12:35 PM
Thanks for sharing the photos, if you don't mind we would like to use this photo on our website and FB page. :)
ProjectPanda13
04-05-2016, 02:49 PM
Thanks for sharing the photos, if you don't mind we would like to use this photo on our website and FB page. :)
feel free to use it.
Latez
economix
04-23-2016, 06:06 PM
Tried to order a minute ago. Said out of stock. When might you have more? Thanks.
phase2
04-25-2016, 04:37 PM
Our new production shipment will be released this week, we estimate by Wednesday.
So please check back our website regularly this week for stock status update.
Thanks
economix
04-28-2016, 07:32 AM
Thanks for the heads up, just placed my order. Will supply a pic when completed for your own files.
phase2
05-04-2016, 05:16 PM
Thanks for the heads up, just placed my order. Will supply a pic when completed for your own files.
Thanks for your business, your order has been shipped already.
dorkidori_s13
05-04-2016, 09:35 PM
i just picked up a set via FRSport with a load of other little things i needed. cant wait to get em in the car!
phase2
05-05-2016, 03:59 PM
i just picked up a set via FRSport with a load of other little things i needed. cant wait to get em in the car!
Excellent, thanks for your support to our distributors for P2M products!
I_bang_u
07-03-2016, 10:19 PM
Panda 13, How does these coil packs holding up i just need to know, i have ordered a set from eBay seller that where they available as of now. just need to know how it go. any update would be helpful thanks
ProjectPanda13
07-04-2016, 08:22 AM
Panda 13, How does these coil packs holding up i just need to know, i have ordered a set from eBay seller that where they available as of now. just need to know how it go. any update would be helpful thanks
They are working well and holding up. I'm still on the stock turbo at 12 psi so I can't tell too much of a difference. My old coil packs went out which was why I went with these.
Latez
Sent from my SGH-T889 using Tapatalk
I_bang_u
07-04-2016, 09:35 AM
They are working well and holding up. I'm still on the stock turbo at 12 psi so I can't tell too much of a difference. My old coil packs went out which was why I went with these.
Latez
Sent from my SGH-T889 using Tapatalk
Cool thanks but mine set up is a bit more heat and power that why I ask you first GT2871R running 18psi soon to be more just want to check it out. :coolugh:
ProjectPanda13
07-04-2016, 06:46 PM
Cool thanks but mine set up is a bit more heat and power that why I ask you first GT2871R running 18psi soon to be more just want to check it out. :coolugh:
With their warranty, I would say it definitely worth it regardless of power level. Not to mention it looks good in blue, like the Split fire, without the price.
Latez
Sent from my SGH-T889 using Tapatalk
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.