Greddy Stuff

[dreimers]

I have a 95 s14 with a blacktop SR swap. I have a ECU tuned be Enthalpy. I also have a Greddy Emanage that I will be hooking up to fine tune the car. I have a Greddy PNP harness already so the injector and ignition maps will be available to me
1. I want to use the Profec E-01 ebc\controller w the Emanage
2. I want to be able to data log from my Autometer wideband AF gauge.

What all is needed to make this happen? I have been searching on forums and on the Greddy site. Cant really figure it out.
So far, I know Ill need a USb to go in between the E-01 and the Emanage.
Will I need the AF harness that plugs into the Emanage?
Will I need to use the software support tool?
What else will I need to make the whole system work?

[RB25GUY]

hmm does the autometer gauge have that feature first and foremost, i dont know if the emanage will read the wideband O2 since the oem is a narrowband style O2 that it would be getting its information from. but hey i could be wrong.

[dreimers]

From what I understand, with the Greddy AF harness it can read any wide band that has the wiring. I know the stock O2 will also be reading w the emanage hooked up.