wtb s14 open diff. in ohio

[candypainted 240sx]

I need the a non abs open diff. in ohio for an s14 I know someone has one with all you guys putting the vlsd in. Help me out

[shoes59]

I have one but I'm in Rochester, NY. Not sure what it'd cost to ship but I'll let it go for $25 + shipping. Reply to [email protected]

[candypainted 240sx]

I might drive up and get it is that around the syracuse area? What is the condition of it?

[koukidrifterz]

hey is ohio nissans still down?

[candypainted 240sx]

yeah it's been down for at least a week I know there were 2 or 3 guys on there that had what I need also. Oh well n.y. isn't that far I like road trips anyways. Ohio nissans server sucks!!!!

[96s14kat]

im pulling mine out of my 96 to put in a lsd. i live in Evansville, IN.

[s14unimog]

I have one and i live in Ga so hit me up if your interested ...([email protected])

[mike13]

i am in desparate need of one also, im sitting here mad because we both need the same part and were in the same area, so were going for the same deals!!!!
i would also drive to rochester for one.

[candypainted 240sx]

don't jack my thread I started this thread and am in desperate need of one I'm 99% sure I'm getting the one in rochester this weekend. But it seems like alot of people have them that are selling them so you can get one of those.

[mike13]

don't jack my thread I started this thread and am in desperate need of one I'm 99% sure I'm getting the one in rochester this weekend. But it seems like alot of people have them that are selling them so you can get one of those.
do you need the entire pumpkin or just the diff? if you need just the diff, i have one and im in Pittsburgh, a lot closer to Ohio. i need the internals (ring gear, pinion)

[candypainted 240sx]

do you need the entire pumpkin or just the diff? if you need just the diff, i have one and im in Pittsburgh, a lot closer to Ohio. i need the internals (ring gear, pinion)
thats what I need a damn bolt came off my kaaz 2 way flying through the rear pumpkin cover I may just need the cover as long as it didn't damage any teethe I'll drop it down and look at it soon. I don't know what happened I tightened them to 110ft.lb in a criss cross pattern with loctite and one still came undone. I marked each bolt with white out so I know I tightened them all. All the chattering and vibration must have loostened one up so I'll tighten them up tighter this time.

[mike13]

thats what I need a damn bolt came off my kaaz 2 way flying through the rear pumpkin cover I may just need the cover as long as it didn't damage any teethe I'll drop it down and look at it soon. I don't know what happened I tightened them to 110ft.lb in a criss cross pattern with loctite and one still came undone. I marked each bolt with white out so I know I tightened them all. All the chattering and vibration must have loostened one up so I'll tighten them up tighter this time.
i will have a diff cover if you want to pick it up

[kaazlsd]

thats what I need a damn bolt came off my kaaz 2 way flying through the rear pumpkin cover I may just need the cover as long as it didn't damage any teethe I'll drop it down and look at it soon. I don't know what happened I tightened them to 110ft.lb in a criss cross pattern with loctite and one still came undone. I marked each bolt with white out so I know I tightened them all. All the chattering and vibration must have loostened one up so I'll tighten them up tighter this time.

Hi,
Don't tighten the bolts more than factory spec. Your bolt may be stretched.
Best thing to do is to replace all bolts. These bolts do stretch like cylinder
head bolts do. Chattering will not loosen the bolts if tightend to factory
spec and loctite was used. We have done over 150 installs here and never
had bolt problems.
Regards,
Kaaz USA Staff :)

[noahrexion]

Well i have a factory s14 diff and pumkin and s13 rear cover... Anyone interested can either come pick it up for free (in Phoenix, AZ) or I will ship at buyers expense. Works just fine, lemme know.

[email protected]

-Austin

[crazy9ceguy]

i have a s14 open diff in ca, [email protected]

[candypainted 240sx]

Hi,
Don't tighten the bolts more than factory spec. Your bolt may be stretched.
Best thing to do is to replace all bolts. These bolts do stretch like cylinder
head bolts do. Chattering will not loosen the bolts if tightend to factory
spec and loctite was used. We have done over 150 installs here and never
had bolt problems.
Regards,
Kaaz USA Staff :)
should I order the bolts from nissan or buy them from a bolt co? I used threadlock and torqued them to 110ft/lb of torque in a criss cross pattern. Do you think my lsd is ok as long as I didn't run it without fluid? I picked up the open diff from the guy in N.Y. this weekend so I don't need one anymore thanks for the offers though.