SR20DET Oil Lines

[boostedsohcs13]

Very Simple, but vital question. When I got my SR it had already been disassembled most of the way. I've got a FSM that tells me the route the oil takes, but it doesn't show me where the lines connect to the block, or where they run from there. Chances are, I'll run some AN fittings to braided line, but I still need to have a visual of what should go where for my own peace of mind.

Thanks for any help.

[S14kouki805]

I'm assuming you are referring to the turbo oil lines? One goes on the side of the block and the other to the bottom near the line between the upper pan and the block.

The bottom one is the return and uses a two bolt pattern, the line kit will not be used here. The AN lines will provide two coolant lines and on oil line. The oil line will be the only banjo style to the block. Do some google searching for images, you'll see exactlt what I'm talking about.

[boostedsohcs13]

alright. Thanks. The block had a banjo bolted to it, but the line was cut, and there was a blue AN a little lower, also on the side of the block. I'll look around and see what I can find

[Kingtal0n]

take pics of it

[boostedsohcs13]

Pretty Sure I've found out enough to determine which lines goes where. However, I'd like to run stainless lines. I've read that people get -AN fittings welded to the block...if my threads are okay, couldn't I just thread in a male/male fitting and go from there?