Biggamehit
11-09-2015, 02:11 PM
Payment: Paypal
Location of parts: Misawa Japan
Shipping: $90 dollars US, Outside of US please contact me for your shipping price.
For Sale
Hybrid Performance RB26 single turbo setup: Will include Turbo, Manifold, 55mm Wastegate, Kinugawa water and oil line+fittings and Sard 650cc Injectors. Contact me for specifics as well as arrange a meeting to see all the goods at my house.
Total price 1500 Firm + Shipping
Turbo Specs:
-Intake :4 inch with anti surge
-Outlet: 2.5 inch
-Compressor trim:A/R.70
-Compressor Wheel diameter: 66.6mm /84.0mm 0.628 Trim
-Turbine wheel diameter : 61.40mm /74.2mm 0.685 Trim
-4 Bolt exhaust flange
-T3 Flange (twin scroll) ( full boost around 3500rpms)
-exhaust A/R 1.05
-Rated up to 750whp
-suitable for big circuits or drag racing with the larger A/r
-Brand new Center section
-Will need to clock turbo to your liking
-Manifold:
-Hybrid Performance Tubular steam-pipe design with 55mm Wastegate Vband flange
-T3/T4 flanged twin scroll.
-Great fitment can be removed and installed in under 23-30mins
-Will need to clock turbo to your liking
Wastegate:
-55mm Hybrid Performance with 2.5" outlet pipe
Injectors:
-Sard 11mm 650cc RB26 drop in injectors with oval clips. The injectors will slide right into you stock fuel rail.
I have been running this setup since 2012 and helped develop it further. The turbo is good for street and mild competition with the new version CHRA featuring a smaller forward balance nut. I put down with 440cc injectors 508chp 443whp 424tq on my Initial Tune on low boost. Never went back to dyno again after but Very certain the setup was at or above 550whp at 16.5psi.
I molded the setup to fit my RB26 powered Silvia which is simply a R32 dimension wise.
Cooling:
-Kinugawa Water feed/return line + Fittings
-Kinigawa Oil feed line plus Fittings
-OEM RB25 oil hard line (Will need to mod for your setup accordingly)
Assesories:
-HKS four layer Rb26 Gaskets
-Drift Tengoku Magazine featuring this setup
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/11222082_10104128895172828_886552097055784787_o.jp g
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12232923_10104128895322528_6437106379747487088_o.j pg
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xlp1/t31.0-8/12187972_10104128895092988_5871271164285929587_o.j pg
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12189403_10104128895147878_1205674913316835550_o.j pg
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/12239417_10104128895013148_3692294462112809138_o.j pg
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xlf1/t31.0-8/905968_10104128895063048_8086646098198673710_o.jpg
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12188085_10104128895402368_4783344210954676654_o.j pg
Video of track and dyno with kit installed on my pro comp car.
Track Vid
Nikko
https://www.youtube.com/watch?v=7knbGI3-hl4
MSP
https://www.youtube.com/watch?v=fwfhfQpIvhg
Dyno power check @ Clipping Point
https://www.youtube.com/watch?v=ymNUCDGGSxU
Location of parts: Misawa Japan
Shipping: $90 dollars US, Outside of US please contact me for your shipping price.
For Sale
Hybrid Performance RB26 single turbo setup: Will include Turbo, Manifold, 55mm Wastegate, Kinugawa water and oil line+fittings and Sard 650cc Injectors. Contact me for specifics as well as arrange a meeting to see all the goods at my house.
Total price 1500 Firm + Shipping
Turbo Specs:
-Intake :4 inch with anti surge
-Outlet: 2.5 inch
-Compressor trim:A/R.70
-Compressor Wheel diameter: 66.6mm /84.0mm 0.628 Trim
-Turbine wheel diameter : 61.40mm /74.2mm 0.685 Trim
-4 Bolt exhaust flange
-T3 Flange (twin scroll) ( full boost around 3500rpms)
-exhaust A/R 1.05
-Rated up to 750whp
-suitable for big circuits or drag racing with the larger A/r
-Brand new Center section
-Will need to clock turbo to your liking
-Manifold:
-Hybrid Performance Tubular steam-pipe design with 55mm Wastegate Vband flange
-T3/T4 flanged twin scroll.
-Great fitment can be removed and installed in under 23-30mins
-Will need to clock turbo to your liking
Wastegate:
-55mm Hybrid Performance with 2.5" outlet pipe
Injectors:
-Sard 11mm 650cc RB26 drop in injectors with oval clips. The injectors will slide right into you stock fuel rail.
I have been running this setup since 2012 and helped develop it further. The turbo is good for street and mild competition with the new version CHRA featuring a smaller forward balance nut. I put down with 440cc injectors 508chp 443whp 424tq on my Initial Tune on low boost. Never went back to dyno again after but Very certain the setup was at or above 550whp at 16.5psi.
I molded the setup to fit my RB26 powered Silvia which is simply a R32 dimension wise.
Cooling:
-Kinugawa Water feed/return line + Fittings
-Kinigawa Oil feed line plus Fittings
-OEM RB25 oil hard line (Will need to mod for your setup accordingly)
Assesories:
-HKS four layer Rb26 Gaskets
-Drift Tengoku Magazine featuring this setup
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/11222082_10104128895172828_886552097055784787_o.jp g
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12232923_10104128895322528_6437106379747487088_o.j pg
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xlp1/t31.0-8/12187972_10104128895092988_5871271164285929587_o.j pg
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12189403_10104128895147878_1205674913316835550_o.j pg
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/12239417_10104128895013148_3692294462112809138_o.j pg
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xlf1/t31.0-8/905968_10104128895063048_8086646098198673710_o.jpg
https://scontent-nrt1-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12188085_10104128895402368_4783344210954676654_o.j pg
Video of track and dyno with kit installed on my pro comp car.
Track Vid
Nikko
https://www.youtube.com/watch?v=7knbGI3-hl4
MSP
https://www.youtube.com/watch?v=fwfhfQpIvhg
Dyno power check @ Clipping Point
https://www.youtube.com/watch?v=ymNUCDGGSxU