PDA

View Full Version : P2M Product Combination Package News Release


phase2
09-26-2015, 12:22 AM
Hi Zilvians,

We are pleased to inform the beginning for our P2M Developed Products combination package by providing parts combination at a package deal pricing.

Rather than buying the items individually one at a time, the combination package combo will save you money by providing you the parts altogether at a reduced MSRP kit price:

http://www.phase2motortrend.com/v/vspfiles/photos/P2-SBLCMB134-HC-2T.jpg

Nissan S13/S14 polyurethane front and rear sway bar end link combo MSRP$115.00 / Street Price $103.50

http://www.phase2motortrend.com/v/vspfiles/photos/P2-OETRDCMB134-HC-2T.jpg

Nissan S13/S14 more angle inner tie rod w/street type outer tie rod combo MSRP: $100.00 / Street Price $90.00

http://www.phase2motortrend.com/v/vspfiles/photos/P2-PROTRDCMB134-HC-2T.jpg

Nissan S13/S14 more angle inner tie rod w/pro type outer tie rod combo MSRP: $135.00 / Street Price: $121.50

http://www.phase2motortrend.com/v/vspfiles/photos/P2-ORSTRDCMB134-HC-2T.jpg

Nissan S13/S14 more angle inner tie rod matched with offset rack spacer kit combo MSRP:$130.00 / Street Price: $117.00

http://www.phase2motortrend.com/v/vspfiles/photos/P2-RSPCMBNS13-HC-2T.jpg

Nissan S13 rear suspension package combo with our V2 extreme drop rear toe rods, rear traction links and rear upper control arms MSRP: $385.00 / Street Price: $346.50

http://www.phase2motortrend.com/v/vspfiles/photos/P2-RSPCMBNS14-HC-2T.jpg

Nissan S14 rear suspension package combo with our V2 extreme drop rear toe rods, rear traction links and rear upper control arms MSRP: $385.00 / Street Price: $346.50

http://www.phase2motortrend.com/v/vspfiles/photos/P2-FRLCANS13-HC-2T.jpg

Nissan S13 and also available for S14 front and rear lower control arm set combo MSRP: $730.00 / Street Price $657.00

http://www.phase2motortrend.com/v/vspfiles/photos/P2-ETMKCMBN240-HC-2T.jpg

Polyurethane solid engine and transmission mount kit combo for Nissan S13/S14 (SR20/KA24 motor) MSRP: $145.00 / Street Price: $130.50

Keep in mind when purchasing on our website, we offer P2M free prime ground shipping. For people don't mind waiting a bit by regular ground shipping can opt for this shipping method to save on shipping cost.

Have a nice weekend!

Dboyizmlg
09-26-2015, 02:30 PM
Sweet parts!!!

StuckeyOG
09-27-2015, 03:37 PM
Damn! Now THAT is solid pricing. If I didn't just pick up poly motor/tranny mounts a few weeks ago I would've definitely grabbed a set off you.

May have to get those swaybar endlinks once the engine is in though!
GLWS guys

racepar1
09-28-2015, 12:27 AM
Whoa, "street price"...

:ugh:

So, are those engine mounts ACTUAL isolated upper and lower plates with urethane bonded in the middle of them? Or are they just a piece of urethane with a bolt running through it?

phase2
09-28-2015, 06:51 PM
Here are the biopsy photos for our engine mount kit:

http://www.phase2motortrend.com/v/vspfiles/photos/P2-EMKNS240-HC-4T.jpg

http://www.phase2motortrend.com/v/vspfiles/photos/P2-EMKNS240-HC-5T.jpg

http://www.phase2motortrend.com/v/vspfiles/photos/P2-EMKNS240-HC-6T.jpg

phase2
09-28-2015, 06:52 PM
New Nissan S13/S14 45mm CNC aluminum short hub boss with universal steering wheel quick release combination:

http://www.phase2motortrend.com/v/vspfiles/photos/P2-SBQRHCMBN240-GD-2T.jpg

MSRP: $130.00 / Street Price: $117.00

bladetech8
09-29-2015, 02:30 PM
Your "Nissan S13/S14 more angle inner tie rod matched with offset rack spacer kit combo" can that be paired with a "street type" outer tie rod? How much for that setup?

Also, the offset rack spacer you make.. Has that been tested and fitted to a USDM LHD power steering rack? All the ones I've seen only work with RHD racks...

Thanks!

phase2
09-29-2015, 02:41 PM
Your "Nissan S13/S14 more angle inner tie rod matched with offset rack spacer kit combo" can that be paired with a "street type" outer tie rod? How much for that setup?

Also, the offset rack spacer you make.. Has that been tested and fitted to a USDM LHD power steering rack? All the ones I've seen only work with RHD racks...

Thanks!
Good suggestion, we will make up this combo kit this week and post back on the forums. The rack spacer kit has been tested and installed on LHD rack.

However what makes it different on RHD rack since we never actually tried it on RHD before we had assumed it should work for RHD as well.

Sent from my D6653 using Tapatalk

TheRealSy90
09-29-2015, 04:32 PM
I don't think it's rhd/lhd issue, it's because the notches on the racks changed at some point, so if you have a certain year they are in the wrong orientation, and you have to make new notches in the end of the rack.

phase2
09-29-2015, 05:50 PM
Very interesting, so far we've yet to encounter such issue with the rack notches. The left and right rack notches are 45 degree opposite from each other:

http://cdn3.volusion.com/frzxb.uzspe/v/vspfiles/photos/P2-ORSTRDCMB134-HC-2T.jpg

Could it be a possibility people received two of the same sides spacer which is why they can't match up on the rack notches. I guess people that experienced this issue before can chime in and give more details.

phase2
09-29-2015, 08:10 PM
Okay we asked around some of our install shops we work with, it turns out that not all steering rack will have the same locking notches angled the same way. It does make sense that Nissan's steering rack supplier does not have to clock the locking notches the same angle every time since no one thought about the steering rack spacers will come into existence until now.

phase2
09-29-2015, 09:38 PM
Your "Nissan S13/S14 more angle inner tie rod matched with offset rack spacer kit combo" can that be paired with a "street type" outer tie rod? How much for that setup?

Also, the offset rack spacer you make.. Has that been tested and fitted to a USDM LHD power steering rack? All the ones I've seen only work with RHD racks...

Thanks!

http://www.phase2motortrend.com/v/vspfiles/photos/P2-ORSIPCMB134-HC-2T.jpg

Released today: P2M offset rack spacer kit + more angle shortened inner tie rods + pro type outer tie rods MSRP$210.00 / Street Price: $189.00

http://www.phase2motortrend.com/v/vspfiles/photos/P2-ORSISCMB134-HC-2T.jpg

Released today: P2M offset rack spacer kit + more angle shortened inner tie rods + street type outer tie rods MSRP$180.00 / Street Price: $162.00

Corbic
02-22-2016, 07:12 PM
So anyone actually reviewed this stuff? I'm worried it's just rebranded eBay parts.

driftage240
02-22-2016, 08:41 PM
Im running a lot of there products, they are not rebranded Ebay parts, and may I add great customer service!

bataangpinoy
02-22-2016, 10:14 PM
So anyone actually reviewed this stuff? I'm worried it's just rebranded eBay parts.

I think they took over Circuit Sports. I have had their arms/tie rod combo in the past, never had any issues with it.

I liked the fine thread adjustment, and the tubular steel construction. Glad they got around to adding dust boots to all their heim joints.

phase2
02-29-2016, 04:44 AM
We used to distribute CS products until our contract expired with them after 8 yrs of servicing and co-opt Research and development for them. Now P2M strictly manufacturer and R&D exclusively our own products which you will notice our expanded product lines that CS does not have by a great leap.

And to answer your question, no P2M is not an eBay brand, there's never such things as eBay brand but more like China parts rebranded on ebay. However if you do a quick keyword search of ebay, we have vast distributors pushing P2M parts, which might make you think we are an eBay brand.

If you ever purchase our parts and compare with another eBay parts for the same item, side by side comparison our quality and attention to detail can't be touched by equivalent China counterparts.

Sent from my SM-G928T using Tapatalk