bleeder valve broke help

[bkfill]

well 1 half is stuck in the calipter 1 half is in my hand
anyone how i could get this out?" please help im stuck in boston :/

im in mass somewhere in lynn or linn

[96twofourty]

you need a ez-out

[bkfill]

please explain what that is
i have 2 options right now i think drill it but it might dmg the calipter or get a new calipter
tried using vice grips, it grabs but once i turn it it snaps right off it
gimme some options common

i did a seach on google all i found was a knife i don't think that'll help if that will explain how it would thanks

[skatanic28]

go to autozone and tell them what happened. they should give you an ez out and a bit that matches. you drill into the bleeder a little and then thread the ez out into that hole (it threads in backwards). should come out real easily after that. be careful when you are drilling so no metal gets into the caliper though, i cant see seals and stuff liking that.

[bkfill]

Whooops?, man well i tried and this is what happen it went straigght in i went really slow
then the bleeder valve cracked, still woudn't come out i vicegripped it and it did the same fell off then a friend tried it and the bit snapped inside the bleedervalve yay!

Time for new break calipers!
Thank you all for your help

[skatanic28]

Whooops?, man well i tried and this is what happen it went straigght in i went really slow
then the bleeder valve cracked, still woudn't come out i vicegripped it and it did the same fell off then a friend tried it and the bit snapped inside the bleedervalve yay!

Time for new break calipers!
Thank you all for your help

sorry to hear that. before you drop the 100+ bucks on a new caliper, take it off and take it to a shop. chances are they will be able to do it, and for pretty cheap. good luck....