Who has a pbm high mount setup?

[Javi802]

I was wondering if you had to route your harness else where?

[zombiewolf513]

just over the core

[Javi802]

Do you have the pbm setup? Could you post a pic of your setup so i have some visualization of how i may do it?

[rwtf]

I had one on one of my old hatches, the only problem was where it ran through the H: motors, but I mounted them lower and made longer rods for them to work.

[zombiewolf513]

You just put the wires between the hmic core and the top panel of the radiator core support. No picture needed for comprehension. It was a no brainer when I first installed it

[TougeSR20Kid]

You just put the wires between the hmic core and the top panel of the radiator core support. No picture needed for comprehension. It was a no brainer when I first installed it

This... I mean you also didn't specify which chassis, but there's plenty of room to route the wiring in between the HMIC and radiator core. The only issue with HMIC's that I have seen is the headlights. I had to shave my housings down on my s13 and my buddy had to remove motors on his pop ups

[slow40sx]

I ran mine down low like so, welded supports to keep the headlights up perminantly (I think 240s look better with the headlights up anyway)

http://i65.photobucket.com/albums/h217/siksilviasx/10653600_665639176888383_950059838448755340_n_zps8 c98631e.jpg (http://s65.photobucket.com/user/siksilviasx/media/10653600_665639176888383_950059838448755340_n_zps8 c98631e.jpg.html)

[zombiewolf513]

Slow, your 240 looks EXACTLY like one of mine.

I mounted the motors on the outside of the ends of the frame rails, extended the harnesses, and extended the rods. Works perfect

[EnnEssEnnKAT]

I ran mine down low like so, welded supports to keep the headlights up perminantly (I think 240s look better with the headlights up anyway)

http://i65.photobucket.com/albums/h217/siksilviasx/10653600_665639176888383_950059838448755340_n_zps8 c98631e.jpg (http://s65.photobucket.com/user/siksilviasx/media/10653600_665639176888383_950059838448755340_n_zps8 c98631e.jpg.html)

This is what my friend did with his. The harness was dropped down and runs between the bottom of the intercooler and the radiator. no problems and fits perfect. he might be selling his IC kit soon for something else.

[slow40sx]

Slow, your 240 looks EXACTLY like one of mine.

I mounted the motors on the outside of the ends of the frame rails, extended the harnesses, and extended the rods. Works perfect

That's a pretty good idea, I personally love the headlights up though lol