C-unit
08-20-2015, 04:30 PM
Some people might have seen this car before. This is my VQ-TT power R32 GTR. I started the project 5 years ago. However plan has changed and I decided to swap everything over to a new chassis.
The shell is bare but I can include addition parts if need. Here are more discription of the chassis.
- 1993 R32 Skyline GTR. Painted Texedo Black. (In the process of wet sanding and buffing.)
- Weld in 6 point in-dash cage with Full interior (minus back seats and back panels)
- Front strut tower reinforced with tube structure.
- Twin side mount intercooler mount.
- Engine bay painted KH2
- Custom rear fender pull to accomodate 18x11 -16 wheel
- Front frame modify to RWD crossmember. Currently has SR crossmember
- Wheel well has been spray with Por15 with black bedliner for protection
- Non-hicas subframe
- Trunk has been cut and modified for fuel cell
- Reinforced Tension rod bracket with tube support
- steering reinforced solid bushing
- Hdydro Ebrake with brake bias adjuster.
- Modified front knuckle for more drift angle
- SPL front tie rod with tie rod end.
Here is what the chassis will come with the following
- All glass
- Doors with door panel
- Dash
- carpet
- Headliner
- Front suspension arms with lower adjustable Nismo arm and SPL tension rod (all brand new parts)
- Front 5lug hub with brand new bearings
- Rear subframe with stock arms, GTS knuckles, 5lug hub
- Tain light (new paint)
- Rear bumper (new paint)
You can swap an R32 crossmember and turn it back into an RB powered skyline. I've been using SR crossmember for my VQ swap.
I am asking $4800 for the chassis.
I can include the following that is build for this chassis for extra:
- Custom 15gal fuel cell with full AN Stainless steel lines (rear to engine bay, 2 13ft SS line) and custom aluminum hardlines, Stainless steel surge tank with bosch 040 pump, warble 255 intank pump. $1500
- Custom chassis harness by Independent speed shop. (prefer not to sell, but if i have to, $2500, I paid close to 4g for it) I can include stock chassis harness for extra if needed
Other parts from the VQ project is not for sale, I've bought a new chassis and everything is going towards there. Pic will be up tomorrow.
Chassis is located in Richmond BC, Canada. Please arrange your own trailer and importation if you are from the states. Thank you
If you have more questions, feel free to email me at [email protected]
The shell is bare but I can include addition parts if need. Here are more discription of the chassis.
- 1993 R32 Skyline GTR. Painted Texedo Black. (In the process of wet sanding and buffing.)
- Weld in 6 point in-dash cage with Full interior (minus back seats and back panels)
- Front strut tower reinforced with tube structure.
- Twin side mount intercooler mount.
- Engine bay painted KH2
- Custom rear fender pull to accomodate 18x11 -16 wheel
- Front frame modify to RWD crossmember. Currently has SR crossmember
- Wheel well has been spray with Por15 with black bedliner for protection
- Non-hicas subframe
- Trunk has been cut and modified for fuel cell
- Reinforced Tension rod bracket with tube support
- steering reinforced solid bushing
- Hdydro Ebrake with brake bias adjuster.
- Modified front knuckle for more drift angle
- SPL front tie rod with tie rod end.
Here is what the chassis will come with the following
- All glass
- Doors with door panel
- Dash
- carpet
- Headliner
- Front suspension arms with lower adjustable Nismo arm and SPL tension rod (all brand new parts)
- Front 5lug hub with brand new bearings
- Rear subframe with stock arms, GTS knuckles, 5lug hub
- Tain light (new paint)
- Rear bumper (new paint)
You can swap an R32 crossmember and turn it back into an RB powered skyline. I've been using SR crossmember for my VQ swap.
I am asking $4800 for the chassis.
I can include the following that is build for this chassis for extra:
- Custom 15gal fuel cell with full AN Stainless steel lines (rear to engine bay, 2 13ft SS line) and custom aluminum hardlines, Stainless steel surge tank with bosch 040 pump, warble 255 intank pump. $1500
- Custom chassis harness by Independent speed shop. (prefer not to sell, but if i have to, $2500, I paid close to 4g for it) I can include stock chassis harness for extra if needed
Other parts from the VQ project is not for sale, I've bought a new chassis and everything is going towards there. Pic will be up tomorrow.
Chassis is located in Richmond BC, Canada. Please arrange your own trailer and importation if you are from the states. Thank you
If you have more questions, feel free to email me at [email protected]