PDA

View Full Version : P2m nissan sr20det silicone radiator hose revision!

phase2
07-21-2015, 07:29 PM
Hello Zilvians,

We would like to make an announcement that our P2M silicone radiator hose kit for Nissan SR20DET will now be INCLUDING the top radiator cooling performer hose kit which is a good option for people wanting to install water temp sensor in the near future a breeze:
http://www.phase2motortrend.com/v/vspfiles/photos/P2-RHK1345BL-2T.jpg
http://www.phase2motortrend.com/v/vspfiles/photos/P2-RHK1345BLK-2T.jpg

With this change, the MSRP price of the radiator hose kit has been raised slightly at $75.00 / set to reflect the increase in costs. Nevertheless, we felt it is still the most bang for your buck radiator hose kit in the market.
brndck
07-21-2015, 11:16 PM
if it comes in red i'll order right now.
phase2
07-22-2015, 12:01 AM
Thanks for your input, we will make red color option for next production run.
jscherf92
07-22-2015, 08:40 AM
If i didnt just replace my hoses i'd be all over this. Bump for a good looking product and a good price.
jduke
07-22-2015, 09:58 AM
Nice! Gonna order it this weekend.
FaLKoN240
07-22-2015, 10:19 AM
Make some for the KA for s14! There are limited KA options. I'd prefer not to run something with Megan on it.
Juantwo3
07-22-2015, 11:13 AM
Will there be some love for the Ka in the future?
phase2
07-22-2015, 12:03 PM
KA hoses are in the works as we speak. =)

Sent from my D6653 using Tapatalk
EDacIouSX
07-22-2015, 10:45 PM
would it be possible to just buy the upper part? for KA when it comes out. don't think I need sr yet.
phase2
07-22-2015, 11:20 PM
Yes upper will also be sold separately.

Sent from my D6653 using Tapatalk
TheRealSy90
07-23-2015, 07:55 AM
Any chance of getting a lower hose version? I run a sensor in both hoses.
phase2
07-23-2015, 12:10 PM
What did you have that required you to run two sensors?

Sent from my D6653 using Tapatalk
TheRealSy90
07-23-2015, 01:01 PM
Nothing other than two defi water temp gauges, one in each hose so I can see the temperature going into the engine, where the factory cluster and ecu temp sensors are located as well.
phase2
07-23-2015, 01:03 PM
SOHC engine or DOHC ?

Sent from my D6653 using Tapatalk
TheRealSy90
07-23-2015, 01:43 PM
SR20det lol
phase2
07-23-2015, 02:02 PM
Lol, well its considered DOHC SR. We will keep the lower hose option in mind for future reference.

Sent from my D6653 using Tapatalk
avinash240
10-31-2015, 02:37 PM
Ditto for the lower hose option as well, and for the same exact reason. I'm running two water temp sensors.
Mister.E
10-31-2015, 10:46 PM
Lower hose option would be great for anyone wanting to run a swirl pot as well, perfect spot to tap.
brndck
11-02-2015, 10:47 AM
Lower hose option would be great for anyone wanting to run a swirl pot as well, perfect spot to tap.

Amen. I run a greddy swirl pot and I would love to have a hose with the fitting already installed so I don't have to cut and install an adaptor. Not like it can be seen that easily, but still it would be an awesome option to have.
cbeuglas
11-02-2015, 11:02 AM
I would also like to see if you can make an upper hose for those of us running an s13 KA radiator with sr20det. I can't find a silicon option for this setup. I am running a rubber hose and would like blue silicone up top.

Sent from my SAMSUNG-SM-G920A using Tapatalk